Efficient Wideband Power Divider for Planar Antenna Arrays
Keywords:
Efficient Wideband Power Divider for Planar Antenna ArraysAbstract
Power dividers with a good match over a wideband of frequencies are designed using Klopfenstein impedance taper for use with wideband antenna arrays. To validate the proposed design procedure a 2-way stripline, and a 2-way microstrip power divider are designed, fabricated, and measured. The measured return loss reveals better than –24 dB (from 4.3 GHz to 19.5 GHz) match for the 2-way stripline, and –27 dB (from 2.2 GHz to 12 GHz) match for the 2-way microstrip. Then a single Klopfenstein taper is used in the design of a 4-way stripline power divider. Measurements reveal return loss better than –22 dB (from 2.3 GHz to 19 GHz) for the 4-way stripline power divider. Furthermore, use of a single taper resulted in a shorter feed network compared to the traditional 4-way feed network using 2-way power dividers at two stages.
Downloads
References
M. D. Abouzahra and K. C. Gupta, Hybrids and power
dividers/combiners, Analysis and Design of Planar
Microwave Components, IEEE Press, New York, 1994.
M. A. Hamid and M. M. Yunik, “On the Design of
Stepped Transmission-Line Transformers,” IEEE
Transactions on Microwave Theory and Techniques, vol.
, no. 9, pp. 528–529, September 1967.
W. Yau, J. M. Schellenberg, and Y. C. Shih, “A new n-
way broadband planar power combiner/divider,” 1986
IEEE MTT-S International Microwave Symposium
Digest, vol. 86, issue 1, pp. 147–149, June 1986.
M. Kishihara, K. Yamane, I. Ohta, and T. Kawai, “A
design of multi-stage, multi-way microstrip power
dividers with broadband properties,” IEEE MTT-S
International Microwave Symposium Digest, vol. 1, pp.
–72, June 2004.
ACES JOURNAL, VOL. 21, NO. 3, NOVEMBER 2006
R. W. Klopfenstein, “A transmission-line taper of
improved design,” Proc. IRE, vol. 44, pp. 31–35, January
D. M. Pozar, Microwave Engineering, 3rd edition, John
Wiley & Sons, New York, 2004.
P. Jia, L.-Y. Chen, N.-S. Cheng and R. A. York, “Design
of waveguide finline arrays for spatial power
combining,” IEEE Transactions on Microwave Theory
and Techniques, vol. 49, no. 4, pp. 609–614, April 2001.
D. Kajfez and J. Prewitt, “Correction to a transmission
line taper of improved design,” IEEE Transactions on
Microwave Theory and Techniques, vol. MTT-21, p. 364,
May 1973.
J. C. Rautio and V. Demir, “Microstrip conductor loss
models for electromagnetic analysis,” IEEE Transactions
on Microwave Theory and Techniques, vol. 51, no. 3, pp.
–921, March 2003.