Magnetic Field Analysis and Measurement of Pulsed Septum Magnet
DOI:
https://doi.org/10.13052/2023.ACES.J.380917Keywords:
Diffraction limited storage ring (DLSR), eddy current, injection and extraction, magnetic field simulation, septum magnet, thermal analysisAbstract
Traditional off-axis injection becomes inadequate in diffraction limited storage ring (DLSR) for its small dynamic aperture (DA). On-axis injection with thin septum could solve the problem. This paper focuses on the theoretical calculation, field simulation, and measurement of thin septum magnets. The scheme of eddy-current type thin septum magnets (the thinnest portion is with the thickness of 0.9 mm) was adopted with laminated silicon steel sheets as the magnet core. The simulation of main field, stray field along the beam trajectory, the leakage field decayed over 1 millisecond time was carried out within Opera 2D/3D. Field measurement and analysis of thin septum magnets also has been conducted comprehensively. The results meet requirements, and the work laid a foundation for injection technology of an advanced light source.
Downloads
References
C. Swenson, D. Arbelaez, J.-Y. Jung, J. Osborn, S. Prestemon, E. Wallen, R. Schlueter, C. Steier, C. Sun, and D. Robin, “Conceptual design of storage ring magnets for a diffraction limited light source upgrade of ALS, ALS-U,” in Proceedings of IPAC2016, Busan, Korea, pp. 1161-1163, May 2016.
L. H. Ouyang, M. Gu, B. Liu, and R. Chen, “Eddy current septum magnets for injection and extraction at SSRF,” Chinese Physics C, vol. 34, no. 3, pp. 389-39, 2010.
W. Kang, X. P. Deng, Q. Han, J. B. Pan, and S. Y. Chen, “Theoretical analysis and computer simulation of eddy-current septum magnets,” High Energy Physics and Nuclear Physics, vol. 25, no. 3, pp. 264-270, 2011.
C. Y. Kuo, C. S. Yang, F. Y. Lin, and Y. L. Chu, “Design and measurement of the septum magnet for the Taiwan Photon Source,” IEEE Transactions on Applied Superconductivity, vol. 22, no. 3, 4101704,2012.
F. Zhang, X. Yan, X. Zhang, and F. Wang, “Numerical analysis of magnetic field measurement based on Faraday rotation in a no-core tellurite fiber,” Optical Fiber Technology, vol. 63, 2021.
L. Christensen, R. Celestina, S. Sperling, R. Mathison, H. Aksoy, and J. Liu, “Infrared temperature measurements of the blade tip for a turbine operating at corrected engine conditions,” Journal of Turbomachinery, pp. 1-35, 2021.
A. A. Kirilenko, D. Y. Kulik, L. A. Rud, V. I. Tkachenko, and N. Herscovici, “Electromagnetic modeling and design of dual-band septum polarizers, Applied Computational Electromagnetics Society (ACES) Journal, vol. 21, no. 2, pp. 155-163, 2022.
