Residual Flux Measurement of Single-phase Transformers based on Equivalent Resistance

Authors

  • Qingkun Wang 1) State Key Laboratory of Reliability and Intelligence of Electrical Equipment Hebei University of Technology, Tianjin, 300130, China 2) Key Laboratory of Electromagnetic Field and Electrical Apparatus Reliability of Hebei Province Hebei University of Technology, Tianjin, 300130, China
  • Yuzhan Ren 1) State Key Laboratory of Reliability and Intelligence of Electrical Equipment Hebei University of Technology, Tianjin, 300130, China 2) Key Laboratory of Electromagnetic Field and Electrical Apparatus Reliability of Hebei Province Hebei University of Technology, Tianjin, 300130, China
  • Youhua Wang 1) State Key Laboratory of Reliability and Intelligence of Electrical Equipment Hebei University of Technology, Tianjin, 300130, China 2) Key Laboratory of Electromagnetic Field and Electrical Apparatus Reliability of Hebei Province Hebei University of Technology, Tianjin, 300130, China
  • Chengcheng Liu 1) State Key Laboratory of Reliability and Intelligence of Electrical Equipment Hebei University of Technology, Tianjin, 300130, China 2) Key Laboratory of Electromagnetic Field and Electrical Apparatus Reliability of Hebei Province Hebei University of Technology, Tianjin, 300130, China
  • Shipu Wu 1) State Key Laboratory of Reliability and Intelligence of Electrical Equipment Hebei University of Technology, Tianjin, 300130, China 2) Key Laboratory of Electromagnetic Field and Electrical Apparatus Reliability of Hebei Province Hebei University of Technology, Tianjin, 300130, China

DOI:

https://doi.org/10.13052/2023.ACES.J.380710

Keywords:

Equivalent resistance, field-coupled equivalent circuit, residual flux measurement, transformer

Abstract

Due to the presence of transformer residual flux, the magnetic flux of the core rapidly reaches saturation, thus causing an inrush current when the no-load transformer is directly connected to the grid, which affects the safe operation of the grid. Therefore, it is necessary to study the residual flux in the core to reduce the inrush current. However, the residual flux estimation has a large error. In this paper, a method is proposed to measure the residual flux of the transformer core by solving equivalent resistance and determining the direction of residual flux by the difference between the forward and reverse transient currents. In addition, the relationship between residual flux and equivalent resistance is established, and the empirical formula is obtained for calculating the residual flux. To evaluate the effectiveness of the proposed method, the residual flux of the square core is measured on the constructed experimental platform. Compared with the experimental results, the relative error of the residual flux of the core calculated by the proposed method is within 6%, which has higher accuracy and provides a reference for residual flux estimation.

Downloads

Download data is not yet available.

Author Biographies

Qingkun Wang, 1) State Key Laboratory of Reliability and Intelligence of Electrical Equipment Hebei University of Technology, Tianjin, 300130, China 2) Key Laboratory of Electromagnetic Field and Electrical Apparatus Reliability of Hebei Province Hebei University of Technology, Tianjin, 300130, China

Qingkun Wang was born in Jining, Shandong, China, in 1998. He received a B.E. degree in electrical engineering from Binzhou University, Binzhou, China, in 2021. He is currently pursuing an M.E. degree in electrical engineering at the Hebei University of Technology, Tianjin, China. His current research interest is the measurement of the residual flux of the power transformercore.

Yuzhan Ren, 1) State Key Laboratory of Reliability and Intelligence of Electrical Equipment Hebei University of Technology, Tianjin, 300130, China 2) Key Laboratory of Electromagnetic Field and Electrical Apparatus Reliability of Hebei Province Hebei University of Technology, Tianjin, 300130, China

Yuzhan Ren was born in Anhui, China, in 1997. He received a B.E. degree in electrical engineering from Northeast Electric Power University, Jilin, China, in 2019. He is currently pursuing a Ph.D. degree in electrical engineering from the Hebei University of Technology, Tianjin, China. His current research interests include measurement of the residual flux of power transformer cores and research on the inrush current of large power transformers.

Youhua Wang, 1) State Key Laboratory of Reliability and Intelligence of Electrical Equipment Hebei University of Technology, Tianjin, 300130, China 2) Key Laboratory of Electromagnetic Field and Electrical Apparatus Reliability of Hebei Province Hebei University of Technology, Tianjin, 300130, China

Youhua Wang was born in Jiujiang, Jiangxi, China, in 1964. He received a B.E. degree from Xian Jiaotong University, Xian, China, in 1987, an M.E. degree from the Hebei University of Technology, Tianjin, China, in 1990, and a Ph.D. from Fuzhou University, Fuzhou, China, in 1994, all in electrical apparatus. He is currently a professor at the College of Electrical Engineering. His current research interests include measurement and modeling of properties of magnetic materials, numerical analysis of the electromagnetic field, and electromagnetic device design, analysis, and optimization.

Chengcheng Liu, 1) State Key Laboratory of Reliability and Intelligence of Electrical Equipment Hebei University of Technology, Tianjin, 300130, China 2) Key Laboratory of Electromagnetic Field and Electrical Apparatus Reliability of Hebei Province Hebei University of Technology, Tianjin, 300130, China

Chengcheng Liu was born in Jiangsu, China, in 1988. He received a B.E. degree in automation engineering from Yangzhou University, Yangzhou, China, in 2010, and a Ph.D. degree in electrical engineering from the Hebei University of Technology, Tianjin, China, in 2016. He was a joint Ph.D. student supported by the Chinese scholarship council with the University of Technology, Sydney, NSW, Australia. He is currently an IEEE member and an associate professor at the Hebei University of Technology. His research interests include the design, analysis, control, and optimization of electromagnetic devices.

Shipu Wu, 1) State Key Laboratory of Reliability and Intelligence of Electrical Equipment Hebei University of Technology, Tianjin, 300130, China 2) Key Laboratory of Electromagnetic Field and Electrical Apparatus Reliability of Hebei Province Hebei University of Technology, Tianjin, 300130, China

Shipu Wu was born in Shijiazhuang, Hebei, China, in 1995. He received a B.E. degree in electrical engineering from the Hebei University of Technology, Tianjin, China, in 2017. He is currently pursuing a Ph.D. degree in electrical engineering at the Hebei University of Technology, Tianjin, China. His current research interests include measurement of the residual flux of power transformer cores and research on the inrush current of large power transformers.

References

C. Chuanjiang, F. Chun-en, X. Yang, L. Wei, Z. Bi-de, and R. Xiao, “Experimental study on controlled unloaded transformer switching considering residual flux”’ 2017 4th International Conference on Electric Power Equipment - Switching Technology (ICEPE-ST), Xi’an, China, 2017.

W. S. Fonseca, D. S. Lima, A. K. F. Lima, M. V. A. Nunes, U. H. Bezerra, and N. S. Soeiro, “Analysis of Structural Behavior of Transformer’s Winding Under Inrush Current Conditions,” IEEE Transactions on Industry Applications, vol. 54, no. 3, pp. 2285-2294, May-June 2018.

E. Cardelli, A. Faba, and F. Tissi, “Prediction and Control of Transformer Inrush Currents,” IEEE Transactions on Magnetics, vol. 51, no. 3, pp. 1-4, March 2015.

W. Yuan, H. Zhang, Y. Shangguan, J. Zou, and J. Yuan, “Analysis on method of calculating transformer residual flux by using the integration of port-voltage waveform and its implementation,” 2017 20th International Conference on Electrical Machines and Systems (ICEMS), Sydney, NSW, Australia, 2017.

K. Wang, G. Li, and S. Zhang, “Research on residual flux characteristics of transformer with single-phase four-limb core under different dc excitation current,” 2020 IEEE International Conference on High Voltage Engineering and Application (ICHVE), Beijing, China, 2020.

D. Cavallera, V. Oiring, J.-L. Coulomb, O. Chadebec, B. Caillault, and F. Zgainski, “A new method to evaluate residual flux thanks to leakage flux, application to a transformer,” IEEE Transactions on Magnetics, vol. 50, no. 2, pp. 1005-1008, Feb. 2014.

T. Peng, D. Wan, M. Zhao, H. Zhou, L. Mao, and X. Duan, “An indirect method for measuring transformer residual magnetism,” 2019 IEEE 3rd Conference on Energy Internet and Energy System Integration (EI2), Changsha, China, pp. 1084-1087, 2019.

D. Vulin, K. Milicevic, I. Biondic, and G. Petrovic, “Determining the residual magnetic flux value of a single-phase transformer using a minor hysteresis loop,” IEEE Transactions on Power Delivery, vol. 36, no. 4, pp. 2066-2074, Aug. 2021.

C. Huo, Y. Wang, S. Wu, and C. Liu, “Research on residual flux density measurement for single-phase transformer core based on energy changes,” IEEE Transactions on Instrumentation and Measurement, vol. 70, pp. 1-9, 2021.

W. Ge, Y. Wang, Z. Zhao, X. Yang, and Y. Li, “Residual flux in the closed magnetic core of a power transformer,” IEEE Transactions on Applied Superconductivity, vol. 24, no. 3, pp. 1-4, June 2014.

S. Wu, Y. Ren, Y. Wang, C. Huo, and C. Liu, “Residual flux measurement of power transformer based on transient current difference,” IEEE Transactions on Magnetics, vol. 58, no. 2, pp. 1-5, Feb. 2022.

Y. Wang, Z. Liu, and H. Chen, “Research on residual flux prediction of the transformer,” IEEE Transactions on Magnetics, vol. 53, no. 6, pp. 1-4, June 2017.

C. Huo, Y. Wang, C. Liu, and G. Lei, “Study on the residual flux density measurement method for power transformer cores based on magnetising inductance,” IET Electric Power Applications, vol. 16, no. 2, pp. 224-235, 2022.

M. Ouili, R. Mehasni, M. Feliachi, H. Allag, H. Bouchekara, G. Berthiau, and M. Latreche, “Coupling of 3D analytical calculation and PSO for the identification of magnet parameters used in magnetic separation,” Applied Computational Electromagnetics Society (ACES) Journal, pp. 1607-1615, 2019.

E. Gomez, A. Gabaldón, A. Molina, and J. Roger-Folch, “Coupling 2D finite element models and circuit equations using a bottom-up methodology,” The Applied Computational Electromagnetics Society (ACES) Journal, pp. 225-231, 2002.

M. Jafarifar, B. Rezaeealam, and A. Mir, “A new approach for improving the load current characteristic of cascaded magnetic flux compression generator,” Applied Computational Electromagnetics Society (ACES) Journal, vol. 34, no. 8, pp. 1134-1142, 2019.

F. G. Montoya, F. D. León, F. Arrabal-Campos, and A. Alcayde, “determination of instantaneous powers from a novel time-domain parameter identification method of non-linear single-phase circuits,” IEEE Transactions on Power Delivery, vol. 37, no. 5, pp. 3608-3619, Oct. 2022.

J. Ge, H. H. Eldeeb, K. Liu, J. Kang, H. Zhao, and O. Mohammed,, “Optimal range of coupling coefficient of loosely coupled transformer considering system resistance,” Applied Computational Electromagnetics Society (ACES) Journal, vol. 35, no. 11, pp. 1368-1369, Nov. 2020.

Downloads

Published

2023-07-31

How to Cite

[1]
Q. . Wang, Y. . Ren, Y. . Wang, C. . Liu, and S. . Wu, “Residual Flux Measurement of Single-phase Transformers based on Equivalent Resistance”, ACES Journal, vol. 38, no. 07, pp. 539–548, Jul. 2023.

Issue

2023: Vol 38 Iss 7

Section

General Submission

Categories