Quantitative Research on Cracks in Pipe Based on Magnetic Field Response Method of Eddy Current Testing
Keywords:
Cracks evaluation, Eddy current testing, finite element method, magnetic field, pipeAbstract
The quantitative evaluation of defects in eddy current testing is of great significance. Impedance analysis, as a traditional method, is adopted to determine defects in the conductor, however, it is not able to depict the shape, size and location of defects quantitatively. In order to obtain more obvious characteristic quantities and improve the ability of eddy current testing to detect defects, the study of cracks in metal pipes is carried out by utilizing the analysis method of three-dimensional magnetic field in present paper. The magnetic field components in the space near the crack are calculated numerically by using finite element analysis. The simulation results confirm that the monitoring of the crack change can be achieved by measuring the magnetic field at the arrangement positions. Besides, the quantitative relationships between the shape, length of the crack and the magnetic field components around the metal pipe are obtained. The results show that the axial and radial magnetic induction intensities are affected more significantly by the cross-section area of the crack. Bz demonstrates obvious advantages in analyzing quantitatively crack circumference length. Therefore, the response signal in the three-dimensional direction of the magnetic field gets to intuitively reflect the change of the defect parameter, which proves the effectiveness and practicability of this method.
Downloads
References
R. Grimberg, “Electromagnetic nondestructive evaluation: Present and future,” Strojniški vestnik – Journal of Mechanical Engineering, vol. 2011, no. 3, pp. 204-217, Mar. 2011.
K. Miya, “Recent advancement of electromagnetic nondestructive inspection technology in Japan,” IEEE Transactions on Magnetics, vol. 38, no. 2, pp. 321-326, Apr. 2002.
A. Sophian, G. Y. Tian, D. Taylor, and J. Rudlin, “Electromagnetic and eddy current NDT: A review,” Insight - Non-Destructive Testing and Condition Monitoring, vol. 43, no. 5, pp. 302-306, May 2001.
H. A. Sabbagh, R. K. Murphy, E. H. Sabbagh, J. C. Aldrin, J. Knopp, and M. Blodgett, “Computational electromagnetics and model-based inversion: A modern paradigm for eddy-current nondestructive evaluation,” Applied Computational Electromagnetics Society Journal, vol. 24, no. 6, pp. 533-540, Dec. 2009.
J. García-Martín, J. Gómez-Gil, and E. VázquezSánchez, “Non-destructive techniques based on eddy current testing,” Sensors, vol. 11, no. 3, pp. 2525-2565, Feb. 2011.
D. Rifai, A. N. Abdalla, K. Ali, and R. Razali, “Giant magnetoresistance sensors: A review on structures and non-destructive eddy current testing applications,” Sensors, vol. 16, no. 3, pp. 1-30, Mar. 2016.
Y. Li, J. Wilson, and G. Y. Tian, “Experiment and simulation study of 3D magnetic field sensing for magnetic flux leakage defect characterisation,” NDT & E International, vol. 40, no. 2, pp. 179-184, Mar. 2007.
M. Ravan, R. K. Amineh, S. Koziel, N. K. Nikolova, and J. P. Reilly, “Sizing of 3-D arbitrary defects using magnetic flux leakage measurements,” IEEE Transactions on Magnetics, vol. 46, no. 4, pp. 1024-1033, May 2010.
J. J. Chen, “3-D defect profile reconstruction from magnetic flux leakage signals in pipeline inspection using a hybrid inversion method,” Applied Computational Electromagnetics Society Journal, vol. 32, no. 9, pp. 826-832, Sep. 2017.
C. K. Low and B. S. Wong, “Defect evaluation using the alternating current field measurement technique,” Insight - Non-Destructive Testing and Condition Monitoring, vol. 46, no. 10, pp. 598-605, Oct. 2004.
J. H. Ge, W. Li, G. M. Chen, and X. K. Yin, “Analysis of signals for inclined crack detection through alternating current field measurement with a U-shaped probe,” Insight - Non-Destructive Testing and Condition Monitoring, vol. 59, no. 3, pp. 121-128, Mar. 2017.
X. C. Hu, “Pulsed alternating current field measurement technique for defect identification and quantification,” Journal of Mechanical Engineering, vol. 47, no. 4, pp. 121-128, Jan. 2011.
F. Jiang, S. L. Liu, S. J. Xin, and H. L. Zhang, “Electromagnetic nondestructive testing model and surface magnetic field analysis for circumferential cracks on metal rod,” ASME - Journal of Nondestructive Evaluation, Diagnostics and Prognostics of Engineering Systems, vol. 2, no. 4, pp. 044501, Nov. 2019.
T. Theodoulidis and J. R. Bowler, “Eddy-current interaction of a long coil with a slot in a conductive plate,” IEEE Transactions on Magnetics, vol. 41, no. 4, pp. 1238-1247, Apr. 2005.
F. Jiang, S. L. Liu, S. J. Xin, et al., “Evaluation of circumferential cracks in metal tube based on magnetic field response model of eddy current testing,” Insight - Non-Destructive Testing and Condition Monitoring, vol. 62, no. 2, pp. 91-97, Feb. 2020.
Z. Zeng, L. Udpa, and S. S. Udpa, “Finite-element model for simulation of ferrite-core eddy-current probe,” IEEE Transactions on Magnetics, vol. 46, no. 3, pp. 905-909, Apr. 2010.
Y. Wei and S. L. Liu, “Numerical analysis of the dynamic behavior of a rotor-bearing-brush seal system with bristle interference,” Journal of 106 ACES JOURNAL, Vol. 36, No. 1, January 2021 Mechanical Science and Technology, vol. 33, no. 8, pp. 1-9, Aug. 2019.
B. Helifa, M. Féliachi, I. K. Lefkaier, and B. Fouad, “Characterization of surface cracks using eddy current NDT simulation by 3D-FEM and inversion by neural network,” Applied Computational Electromagnetics Society Journal, vol. 31, no. 2, pp. 187-194, Feb. 2016.