PEEC-Based Multi-Objective Synthesis of NFC Antennas in the Presence of Conductive Structures

Authors

  • Thomas Bauernfeind Institute of Fundamentals and Theory in Electrical Engineering Graz University of Technology, Graz, 8010, Austria
  • Paul Baumgartner Institute of Fundamentals and Theory in Electrical Engineering Graz University of Technology, Graz, 8010, Austria
  • Oszkar Biro Institute of Fundamentals and Theory in Electrical Engineering Graz University of Technology, Graz, 8010, Austria
  • Christian Magele Institute of Fundamentals and Theory in Electrical Engineering Graz University of Technology, Graz, 8010, Austria
  • Werner Renhart Institute of Fundamentals and Theory in Electrical Engineering Graz University of Technology, Graz, 8010, Austria
  • Riccardo Torchio Dipartimento di Ingegneria Industriale Università degli Studi di Padova, Padova, 35131, Italy

Keywords:

NFC antennas,, numerical optimization, partial element equivalent circuit method

Abstract

Near Field Communication (NFC) techniques are widely used within everyday activities, e.g., contactless payment systems or authentication. Regardless of the application typically the requirements on the antenna structure are manifold. Frequently limitations in the available space make the antenna design quite challenging especially if other conductive structures are close to the NFC antenna. In the present paper we propose to synthesize the geometry of proximity integrated circuit card (PICC) antennas according to class 6 in the presence of nearby metallic structures. The optimization relies on the differential evolution strategy. The computation of the forward problem is based on the partial element equivalent circuit (PEEC) method.

Downloads

Download data is not yet available.

References

M. Gebhart, R. Neubauer, M. Stark, and D. Warnez, “Design of 13.56 MHz smartcard stickers with ferrite for payment and authentication,” 2011 3rd International Workshop on Near Field Communication, Hagenberg, pp. 59-64, 2011.

T. Bauernfeind, K. Preis, W. Renhart, O. Bíró, and M. Gebhart, “Finite element simulation of impedance measurement effects of NFC antennas,” IEEE Trans. Magn., 51(3), pp. 1-4, 2015.

M. Roland, H. Witschnig, E. Merlin, and C. Saminger, “Automatic impedance matching for 13.56 MHz NFC antennas,” 2008 6th International Symposium on Communication Systems, Networks and Digital Signal Processing, Graz, pp. 288-291, 2008.

T. Bauernfeind, P. Baumgartner, O. Bíró, C. A. Magele, K. Preis, and R. Torchio, “PEEC-based multi-objective synthesis of non-uniformly spaced linear antenna arrays,” IEEE Trans. Magn., 53(6), pp. 1-4, 2017.

P. Alotto, “A hybrid multiobjective differential evolution method for electromagnetic device optimization,” COMPEL-The International Journal for Computation and Mathematics in Electrical and Electronic Engineering, 30(6), pp. 1815-1828, 2011.

C. Magele, G. Fürntratt, B. Brandstätter, and K. R. Richter, “Self-adaptive fuzzy sets in multi objective optimization using genetic algorithms,” Applied Computational Electromagnetics Society Journal, 12(2), pp. 26-31, 1997.

Downloads

Published

2021-07-14

How to Cite

[1]
Thomas Bauernfeind, Paul Baumgartner, Oszkar Biro, Christian Magele, Werner Renhart, and Riccardo Torchio, “PEEC-Based Multi-Objective Synthesis of NFC Antennas in the Presence of Conductive Structures”, ACES Journal, vol. 34, no. 02, pp. 339–341, Jul. 2021.

Issue

2019: Vol 34 Iss 2

Section

General Submission