Half-Loop Segmented Antenna with Omnidirectional Hemispherical Coverage for Wireless Communications

Authors

  • Payam Nayeri Department of Electrical Engineering and Computer Science Colorado School of Mines, Golden, CO 80401, USA
  • Atef Z. Elsherbeni Department of Electrical Engineering and Computer Science Colorado School of Mines, Golden, CO 80401, USA
  • Roger Hasse Georgia Tech Research Institute Georgia Institute of Technology, Atlanta, GA 30332, USA
  • Darko Kajfez Department of Electrical Engineering University of Mississippi, University, MS 38677, USA

Keywords:

Antenna directivity, antenna impedance matrix, design optimization, omnidirectional antenna, partitioned antenna, printed circuit antenna, segmented antenna

Abstract

Segmented antennas loaded with reactance elements at the junctions between segments provide additional parameters for shaping antenna characteristics. The design procedure consists of first, circuit analysis of the multiport antenna description to determine the initial values of the lumped element reactances and second, of fine tuning the antenna dimensions full-wave simulation software. Measured results show that a good matching and an omnidirectional radiation pattern in the vertical plane is maintained up to ? = 70º with a circular ground plane of 1m diameter.

Downloads

Download data is not yet available.

References

P. Nayeri, D. Kajfez, and A. Z. Elsherbeni, “Design of a segmented half-loop antenna,” IEEE Antennas and Propagation Society International Symposium, Memphis, TN, July 2014.

ANSYS HFSS, v. 15.0, ANSYS Inc.

R. E. Collin, Radiation from Simple Sources, Ch. 2, Antenna Theory, Part I, New York: McGraw-Hill, 1969.

Matlab®, The Mathworks Inc., Natick, MA.

Downloads

Published

2021-07-25

How to Cite

[1]
Payam Nayeri, Atef Z. Elsherbeni, Roger Hasse, and Darko Kajfez, “Half-Loop Segmented Antenna with Omnidirectional Hemispherical Coverage for Wireless Communications”, ACES Journal, vol. 33, no. 02, pp. 123–126, Jul. 2021.

Issue

Section

Articles