Short Pulse Propagation along Microstrip Meander Delay Lines with Design Constraints: Comparative Analysis of the Quasi-static and Electromagnetic Approaches
关键词:
Electromagnetic analysis, meander delay line, quasi-static approach摘要
Short pulse propagation along microstrip meander delay lines is considered. Electromagnetic analysis is used in the CST MWS software. A quasistatic analysis in TALGAT software is used as another approach, for which the complete computational models for capacitive matrix calculation are presented. The results of simulations are given. It is shown that if a number of turns is increased and their length is reduced proportionally, distortions of a pulse signal in the line are reduced. At the same time, though the electrical width of the structure increases, an agreement between the results of quasi-static and electromagnetic analyses is improved. Memory costs of electromagnetic analysis and quasi-static analysis are comparable, while the latter is significantly less time-consuming. Thus, it is demonstrated that a quasi-static analysis can be quite relevant during the design of the microstrip meander delay lines with minimal distortions.
##plugins.generic.usageStats.downloads##
参考
R. B. Wu and F. L. Chao, “Laddering wave in serpentine delay line,” IEEE Trans. Compon., Packag., Manuf. Technol., vol. 18, no. 4, pt. B, pp. 644-650, Nov. 1995.
S. Guang-Hwa, C. Chia-Ying, and R. B. Wu, “Guard trace design for improvement on transient waveforms and eye diagrams of serpentine delay lines,” IEEE Transactions on Advanced Packaging, vol. 33, no. 4, p. 1051-1060, 2010.
A. Bruce, “Importance and process of validation for all levels of modeling problems,” Proc. of the 2009 IEEE Int. Symp. on EMC, 2009.
E. Topsakal and J. Volakis, “Finite element method for the accurate analysis of delay line propagation characteristics,” IEEE International Symposium on EMC, vol. 2, pp. 1074-1076, 2003.
A. Kabiri, Q. He, M. H. Kermani, and O. M. Ramahi, “Design of a controllable delay line,” IEEE Transactions on Advanced Packaging, vol. 33, no. 4, pp. 1080-1087, 2010.
B. J. Rubin and B. Singh, “Study of meander line delay in circuit boards,” IEEE Transactions on Microwave Theory and Techniques, vol. 48, no. 9, pp. 1452-1460, 2000.
A. U Bhobe, C. L. Holloway, and M. Piket-May, “Meander delay line challenge problem: a comparison using FDTD, FEM and MoM,” IEEE International Symposium on EMC, vol. 2, pp. 805- 810, 2001.
The Finite Integration Technique,[Online]. Available: https://www.cst.com/Products/CSTmws/FIT
T. R. Gazizov, “Analytic expressions for Mom calculation of capacitance matrix of two dimensional system of conductors and dielectrics having arbitrary oriented boundaries,” Proc. of the 2001 IEEE EMC Symposium, Montreal, Canada, vol. 1. pp. 151-155, Aug. 13-17, 2001.
J. R. Griffith and M. S. Nakhla, “Time-domain analysis of lossy coupled transmission lines,” IEEE Transactions on Microwave Theory and Techniques, vol. 38, pp. 1480-1487, 1990.
T. R. Gazizov, “Calculation of a capacitance matrix for a two-dimensional configuration of conductors and dielectrics with orthogonal boundaries,” Russian Physics Journal, vol. 47, pp. 326-328, 2004.
