Using Folded Open-Loop Ring Resonator to Design a Common-Mode Suppression and Frequency Adjustable Balun-Bandpass Filter
关键词:
Balanced impedance, balun-bandpass filter, frequency adjustable, open-loop ring resonators (OLRRs)摘要
A compact and simple balun-bandpass filter was investigated by using a pair of half-wavelength open-loop ring resonators (OLRRs) and two microstrip lines. The balun-bandpass filter could be designed easily with a different center frequency by changing the path length of OLLRRs. The design methodology was adopted based on EM simulation to obtain these optimally designed parameters of the OLRRs, and microstrip lines and the filters were fabricated on FR4 substrate. The filters with the frequencies of 2.6 GHz and 5.2 GHz were designed to prove the characteristic of frequency adjustable and they were fabricated with the properties of wide bandwidth and low insertion loss. The balun-bandpass filters presented an excellent inband balanced performance with common-mode rejection ratio over than 40 dB and 34 dB in the passbands of 2.6 GHz and 5.2 GHz, respectively. Good correlation was seen between simulation and measurement, and the result showed that first run pass had been achieved in the majority of our design.
##plugins.generic.usageStats.downloads##
参考
M. Tamura, T. Ishizaki, and M. Hoft, “Design and analysis of vertical split ring resonator and its application to unbalanced-balanced filter,” IEEE Trans. Microw. Theory Tech., vol. 58, no. 1, pp. 157-164, 2010.
L. K. Yeng and K. L. Wu, “An LTCC balancedto-unbalanced extracted-pole bandpass filter with complex load,” IEEE Trans. Microw. Theory Tech., vol. 54, no. 4, pp. 1512-1518, 2006.
E. Y. Jung and H. Y. Hwang, “A balun-BPF using a dual mode ring resonator,” IEEE Microw. Wireless Compon. Lett., vol. 17, no. 9, pp. 652- 654, 2007.
S. J. Kang and H. Y. Hwang, “Ring-balun-bandpass filter with harmonic suppression,” IET Microw. Antennas Propag., vol. 4, no. 11, pp. 1847-1854, 2010.
L. H. Zhou, H. Tang, J. X. Chen, and Z.-H. Bao, “Tunable filtering balun with enhanced stopband rejection,” Electron. Lett., vol. 48, no. 14, 2012.
G. S. Huang and C. H. Chen, “Dual-band balun bandpass filter with hybrid structure,” IEEE Microw. Wireless Compon. Lett., vol. 21, no. 7, pp. 356-358, 2011.
Q. Xue, J. Shi, and J. X. Chen, “Unbalanced-tobalanced and balanced-to-unbalanced diplexer with high selectivity and common-mode suppression,” IEEE Trans. Microw. Theory Tech., vol. 59, no. 11, pp. 2848-2855, 2011.
Z. H. Bao, J. X. Chen, E. H. Lim, and Q. Xue, “Compact microstrip diplexer with differential outputs,” Electron. Lett., vol. 46, no. 11, pp. 766- 768, 2010.
Y. X. Ji and J. Xu, “Compact BPF and diplexer using capacitively loaded λ/4 shorted meander line resonator,” J. Electromagnet. Waves Appl., vol. 28, no. 1, pp. 112-118, 2014.
C. Y. Chen and C. Y. Hsu, “A simple and effective method for microstrip dual-band filters design,” IEEE Microw. Wireless Compon. Lett., vol. 16, no. 5, pp. 246-248, May 2006.
J. S. Hong, Microstrip Filters for RF/Microwave Applications, 2nd edition, Wiley, New York, 2011.
X. Y. Zhang and Q. Xue, “Harmonic-suppressed bandpass filter based on discriminating coupling,” IEEE Microw. Wireless Compon. Lett., vol. 19, no. 11, pp. 695-697, 2009.
Y. C. Li, X. Y. Zhang, and Q. Xue, “Bandpass filter using discriminating coupling for extended out-of-band suppression,” IEEE Microw. Wireless Compon. Lett. vol. 20, no. 7, pp. 369-371, 2010.
W. R. Eisenstadt, R. Stengel, and B. M. Thompson, Microwave Differential Circuit Design Using Mixed-Mode S-Parameters, Boston, MA, USA, 2006.
