Frequency and Time Domain Investigation of Compact UWB Slot Antenna with Triple Band Notched Characteristics
关键词:
Band notched characteristics, radiation patch, resonant slots, system fidelity factor摘要
In this paper, a simple compact ultrawideband (UWB) microstrip slot antenna with triple band notched characteristics is presented. In the proposed antenna, a good impedance matching over a very wide frequency range is achieved by adding two rectangular stubs to the bottom section of the simple rectangular patch. Moreover, by employing an inverted T-shaped stub connected to the ground plane and two U-shaped and ?-shaped slots in the modified patch, triple band notched properties are obtained. This proposed triple band notched antenna with dimensions of 26×26 mm2 has a very wide bandwidth from 2.5 GHz up to 19 GHz, which is about 150% fractional bandwidth of the center frequency. Unlike the most previous works reported in the literature, the triple band notched feature applied in the proposed antenna does not deteriorate the impedance bandwidth at higher frequencies. The radiation results such as gain, efficiency and radiation patterns as well as time domain properties of the proposed antenna show that it can be a good candidate for new super wideband applications.
##plugins.generic.usageStats.downloads##
参考
S. R. Emadian, M. Mirmozafari, C. Ghobadi, and J. Nourinia, “Bandwidth enhancement of dual bandnotched circle-like slot antenna,” Electronics Letters, vol. 48, no. 7, pp. 356-357, Mar. 2012.
S. R. Emadian and J. Ahmadi-shokouh, “Modified ground circle like-slot antenna with dual bandnotched characteristics for super UWB applications,” Applied Computational Electromagnetics Society (ACES) Journal, vol. 30, pp. 436-443, 2015.
S. R. Emadian and J. Ahmadi-shokouh, “Very small dual band notched rectangular slot antenna with enhanced impedance bandwidth,” IEEE Trans. Antennas Propag., vol. 63, no. 10, pp. 4529-4534, 2015.
S. R. Emadian, C. Ghobadi, J. Nourinia, M. Mirmozafari, and J. Pourahmadazar, “Bandwidth enhancement of CPW-fed circle-like slot antenna with dual band-notched characteristic,” IEEE Antennas Wireless Propag. Lett., vol. 11, pp. 543- 546, 2012.
D. Sarkar, K. Srivastava, and S. Saurav, “A compact microstrip-fed triple band-notched UWB monopole antenna,” IEEE Antennas Wireless Propag. Lett., vol. 13, pp. 396-399, 2014.
S. Venkata, M. Rana, P. Bakariya, S. Dwari, and M. Sarkar, “Planar ultrawideband monopole antenna with tri-notch band characteristics,” Progress In Electromagnetics Research C, vol. 46, pp. 163-170, 2014.
Y. Zhang, W. Hong, C. Yu, Z. Kuai, Y. Don, and J. Zhou, “Planar ultrawideband antennas with multiple notched bands based on etched slots on the patch and/or split ring resonators on the feed line,” IEEE Trans. Antennas Propag., vol. 56, no. 9, pp. 3063-3068, 2008.
C. Zhang, J. Zhang, and L. Li, “Triple bandnotched UWB antenna based on SIR-DGS and fork-shaped stubs,” Electronics Letters, vol. 50, no. 2, pp. 67-69, Jan. 2014.
F. Zhu, S. Gao, A. Ho, A. Abd-Alhameed, C. See, T. Brown, J. Li, G. Wei, and J. Xu, “Multiple bandnotched UWB antenna with band-rejected elements integrated in the feed line,” IEEE Trans. Antennas Propag., vol. 56, no. 9, pp. 3063-3068, 2008.
Y. Zhang, W. Hong, C. Yu, J. Zhou, and Z. Kuai, “Design and implementation of planar ultrawideband antennas with multiple notched bands based on stepped impedance resonators,” IET Microw. Antennas Propag., vol. 3, no. 12, pp. 1051- 1059, 2008.
A. Dastranj and H. Abiri, “Bandwidth enhancement of printed E-shaped slot antennas fed by CPW and microstrip line,” IEEE Trans. Antenna Propag., vol. 58, pp. 1402-1407, 2010.
G. Quintero, J.-F. Zürcher, and A. K. Skrivervik, “System fidelity factor: a new method for comparing UWB antennas,” IEEE Trans. Antennas Propag., vol. 59, no. 7, pp. 2502-2512, July 2011.
