Design of a Novel Ultra-Wideband Semicircular Printed Antenna with Dual-Band Notched Characteristic

作者

  • Mahdi Najafpur Department of Electrical Engineering Urmia Branch, Islamic Azad University, Urmia, Iran
  • Javad Nourinia Department of Electrical Engineering Urmia Branch, Islamic Azad University, Urmia, Iran
  • Fateme Azamian Jazi Department of Electrical Engineering Urmia Branch, Islamic Azad University, Urmia, Iran

关键词:

Band notch, compact, microstrip antenna

摘要

A compact semicircular printed antenna with dual-band notched characteristic is proposed. A narrow rectangular slot is etched on the radiation patch to prevail notch band at 5.13-5.87 GHz for WLAN. By using two circular slots (C-shaped) defected ground structure, another notch band, at 7.59-9.03 GHz for some C-band satellite communication systems, is achieved. Due to the shape of the proposed antenna, the total dimension of this structure occupies very small space. The antenna is successfully simulated and measured. A simple 50-? microstrip line is used to excite the slot. The parameters and dimensions of the antenna have been investigated by using HFSS. Results demonstrate that the suggested antenna with small size of 20×20×1 mm3 has desired bandwidth range from 2.6-13.3 GHz for VSWR?2, except two notch bands.

##plugins.generic.usageStats.downloads##

##plugins.generic.usageStats.noStats##

参考

Y. Li, W. Li, Si. Li, and T. Jiang, “Miniaturization reconfigurable wide slot antenna for multi-mode wireless communication applications,” IEEE AsiaPacific Conference on Antennas and Propagation, Singapore, Aug. 2012.

C. C. Lin and R. W. Ziolkowski, “Tri-band notched ultra-wideband antenna using capacitively loaded loops (CLLs),” IEEE, 2010.

W. S. Lee, D. Z. Kim, K. J. Kim, and J. W. Yu, “Wideband planar monopole antennas with dual band-notched characteristics,” IEEE Trans. Microw. Theory Tech., vol. 54, pp. 2800-2806, 2006.

S. W. Su and K. L. Wong, “Printed bandnotched ultra-wideband quasi-dipole antenna,” Microw. Opt. Technol. Lett., vol. 48, pp. 418- 420, 2006.

J. I. Kim and Y. Jee, “Design of ultrawideband coplanar waveguide-fed Li-shape planar monopole antennas,” IEEE Antennas Wirel. Propag. Lett., vol. 6, pp. 383-387, 2007.

Y. S. Li, X. D. Yang, C. Y. Liu, and T. Jiang, “Compact CPW-fed ultrawideband antenna with band-notched characteristic,” Electron. Lett., vol. 46, no. 23, pp. 1533-1534, 2010.

Y. S. Li, X. D. Yang, Q. Yang, and C. Y. Liu, “Compact coplanar waveguide fed ultra wideband antenna with a notch band characteristic,” AEU-Int. J. Electron. Commun., vol. 65, no. 11, pp. 961-966, 2011.

C. P. Hsieh, T. C. Chiu, and C. H. Lai, “Compact dual-band slot antenna at the corner of the ground plane,” IEEE Trans. Antennas Propag., vol. 57, no. 10, pp. 3423-3426, Oct. 2009.

W. C. Liu, C. M. Wu, and N. C. Chu, “A compact CPW-fed slotted patch antenna for dual-band operation,” IEEE Antennas Wireless Propag. Lett., vol. 9, pp. 595-598, 2010.

W. Hu, Y. Z. Yin, P. Fie, and X. Yang, “Compact triband square-slot antenna with symmetrical L-strips for WLAN/WIMAX applications,” IEEE Antennas and Wireless Propagation Letters, vol. 10, pp. 462-465, 2011.

S. Ghosh, “Band-notched modified circular ring monopole antenna for ultrawideband applications,” IEEE Antennas and Wireless Propagation Letters, vol. 9, pp. 276-279, 2010.

M. Ojaroudi, S. Yazdanifard, and N. Ojaroudi, “Band-notched small square-ring antenna with a pair of T-shaped strips protruded inside the square ring for UWB applications,” IEEE Antennas and Wireless Propagation Letters, vol. 10, pp. 227-230, 2011.

C. Deng, L. Li, Q. Gong, D. Zhan, and Y. Zou, “Planar printed monopole antennas for ultrawideband/multi-band wireless systems,” IEEE, 2011.

C. C. Lin, P. Jin, and R. W. Ziolkowski, “Single, dual and tri-band-notched ultrawideband (UWB) antennas using capacitively loaded loop (CLL) resonators,” IEEE Transactions on Antennas and Propagation, vol. 60, no. 1, pp. 102-109, Jan. 2012.

##submission.downloads##

已出版

2021-08-22

栏目

General Submission