Modified Antipodal Vivaldi Antenna with Shaped Elliptical Corrugation for 1-18 GHz UWB Application

作者

  • Muhammad Ahmad Ashraf Department of Electrical Engineering KACST Technology Innovation Center in RFTONICS for the e-Society King Saud University, Riyadh, 11421, Kingdom of Saudi Arabia
  • Khalid Jamil Prince Sultan Advanced Technology Research Institute King Saud University, Riyadh, 11421, Kingdom of Saudi Arabia
  • A. R. Sebak KACST Technology Innovation Center in RFTONICS for the e-Society King Saud University, Riyadh, 11421, Kingdom of Saudi Arabia Electrical and Computer Engineering Department Concordia University, Montreal, Canada
  • Mobeen Shoaib Prince Sultan Advanced Technology Research Institute King Saud University, Riyadh, 11421, Kingdom of Saudi Arabia
  • Zeyad Alhekail Department of Electrical Engineering King Saud University, Riyadh, 11421, Kingdom of Saudi Arabia
  • Majeed Alkanhal Department of Electrical Engineering King Saud University, Riyadh, 11421, Kingdom of Saudi Arabia
  • Saleh Alshebeili Department of Electrical Engineering KACST Technology Innovation Center in RFTONICS for the e-Society King Saud University, Riyadh, 11421, Kingdom of Saudi Arabia

关键词:

Corrugated UWB antenna, fidelity factor, time domain, ultra-wideband

摘要

We present to antipodal tapered slot antennas: one with elliptical strips termination and the other modified with elliptical shaped corrugations. Compared to the other, the corrugated antenna uses elliptical slots loading to improve the gain by up to 1.9 dB over operational bandwidth 0.8-18 GHz. It also improves the front to back lobe ratio. The simulated frequency and time domain results are in good agreement with measured performance of both antennas. Experimental results verify a fidelity factor greater than 0.86 for both antennas by transmitting 30ps (3-18 GHz) Ultra-Wideband (UWB) pulses.

##plugins.generic.usageStats.downloads##

##plugins.generic.usageStats.noStats##

##submission.downloads##

已出版

2021-08-24

栏目

General Submission