Analysis of Square Coaxial Line Family
关键词:
Capacitance per unit length, equivalent electrodes method, measurements, square coaxial line摘要
In this paper, the Equivalent Electrodes Method (EEM) has been proposed for the analysis of square coaxial lines family. Lines with single and two layer perfect or imperfect medium have been analyzed. The capacitance per unit length of these lines has been calculated. The results obtained by EEM have been compared with those reported in the literature, obtained by other methods, and those obtained by using software package COMSOL Multiphysics. Also, with the aim of comparison of the results, capacitance measurements based on a high resolution CDC (Capacitance to Digital Converter) have been realized. All results obtained have been found to be in very good agreement.
##plugins.generic.usageStats.downloads##
参考
J. H. Riblet, “Expansions for the capacitance of a square in a square with a aomparison,” IEEE Transactions on Microwave Theory and Techniques, vol. 44, no. 2, pp. 338-340, 1996.
T. YuBo, Z. Bing, and W. Xin, “Numerical method for solving characteristic parameters of square coaxial line,” IEEE Antennas and Propagation Society International Symposium, Honolulu, HI, SAD, pp. 73-76, June 9-15, 2007.
Q. Zheng, W. Lin, F. Xie, and M. Li, “Multipole theory analysis оf а rectangular transmission line family,” Microwave and Optical Technology Letters, vol. 18, no. 6, pp. 382-384, 1998.
S. M. Musa and M. N. O. Sadiku, “Analysis of rectangular coaxial lines,” IEEE Region 5 Technical Conference, Fayetteville, AR, SAD, pp. 322-325, April 20-22, 2007.
Ž. J. Mančić and V. V. Petrovic, “Analysis of square coaxial line with anisotropic dielectric by finite element method, Telfor Journal, vol. 3, no. 2, pp. 125-127, 2011.
M. V. Schneider, “Computation of impedance and attenuation of TEM-line by finite difference methods,” IEEE Transactions on Microwave Theory and Techniques, vol. 13, no. 6, pp. 793- 800, 1965.
R. F. Harrington, “Field computation by moment methods,” The Macmillan Company, New York, 1969.
Y. J. Liu and N. Nishimura, “The fast multipole boundary element method for potential problems: a tutorial,” Engineering Analysis with Boundary Elements, vol. 30, no. 5, pp. 371-381, 2006.
J. Singh, A. Gliere, and J. L. Achard, “A multipole expansion-based boundary element method for axisymmetric potential problem,” Engineering Analysis with Boundary Elements, vol. 33, no. 5, 654-660, 2009.
N. B. Raicevic and S. R. Aleksic, “One method for electric field determination in the vicinity of infinitely thin electrode shells,” Engineering Analysis with Boundary Elements, vol. 34, no. 2, 97-104, 2010.
A. M. Milovanovic and M. M. Bjekic, “Approximate calculation of capacitance of lines with multilayer medium,” Journal of Electrical Engineering, vol. 62, no. 5, pp. 249-257, 2011.
D. M. Velickovic, “Equivalent electrodes method,” Scientific Review, vol. 21-22, pp. 207-248, 1996.
D. M. Velickovic, “Equivalent electrodes method application in nonrotational fields theory,” Fourth International Symposium of Applied Electrostatics ПЕС 96, Nis, Serbia, pp. 5-30, May 1996.
D. M. Velickovic and A. Milovanovic, “Approximate calculation of capacitance,” Proceedings of VIII International IGTE Symposium on Numerical Field Calculation in Electrical Engineering, Graz, Austria, pp. 339-344, September 1998.
D. M. Velickovic and A. Milovanovic, “Electrostatic field of cube electrodes,” Serbian Journal of Electrical Engineering, vol. 1, no. 2, pp. 187-198, 2004.
A. Milovanovic and B. Koprivica, “Analysis of square coaxial lines by using equivalent electrodes method,” Sixteenth International Symposium on Theoretical Electrical Engineering ISTET'11, Klagenfurt, Austria, pp. 191-197, July 2011.
Analog Devices, Inc., “24-bit capacitance-to-digital converter with temperature sensor, AD 7745/ AD7746,” http://www.analog.com/static/importedfiles/data_sheets/AD7745_7746.pdf.
Y. T. Lo and S. W. Lee, “Antenna handbook,” Van Nostrand Reinhold, New York, 1988.
