A Simple Coupled-Line Wilkinson Power Divider for Arbitrary Complex Input and Output Terminated Impedances
关键词:
Arbitrary complex terminated impedances, coupled line and power divider摘要
A simple and analytical design methodology for a novel coupled-line power divider with arbitrary complex terminated impedances is proposed in this paper. Because of the usage of a single-section coupled line, the additional odd-mode characteristic impedance increases the design degree of freedom and makes the isolation structure still use a single resistor when terminated impedances are extended from real values (such as 50 Ohm) to arbitrary complex values. To design this generalized coupled-line power divider, the electrical parameters including electrical lengths and characteristic impedances can be redesigned by the provided closed-form mathematical expressions when complex terminated impedances are known. The validity of this given design methodology has been confirmed by simulation and measurement of two typical microstrip examples.
##plugins.generic.usageStats.downloads##
参考
E. Wilkinson, “An n-way hybrid power divider,” IRE Trans. Microw. Theory Tech., vol. 8, no. 1, pp. 116-118, 1960.
C. Liao, L. Chen, W. Lin, X. Zheng, and Y. Wu, “Design of an ultra-wideband power divider via the coarse-grained parallel micro-genetic algorithm,” Progress In Electromagnetics Research, vol. 124, pp. 425-440, 2012.
J. Jin, X. Lin, X. Gao, X. Zhuang, and Y. Fan, “A dual-band power divider using parallel strip line with high isolation,” Journal of Electromagnetic Waves and Applications, vol. 26, pp. 1594-1601, 2012.
J. Li, J. Nan, X. Shan, and Q. Yan, “A novel modified dual-frequency wilkinson power divider with open stubs and optional isolation,” Journal of Electromagnetic Waves and Applications, vol. 24, pp. 2223-2235, 2010.
J. Li, Y. Wu, Y. Liu, J. Shen, S. Li, and C. Yu, “A generalized coupled-line dual-band wilkinson power divider with extended ports,” Progress In Electromagnetics Research, vol. 129, pp. 197-214, 2012.
Y. Wu and Y. Liu, “An unequal coupled-line wilkinson power divider for arbitrary terminated impedances,” Progress In Electromagnetics Research, vol. 117, pp. 181-194, 2011.
Z. Lin and Q. X. Chu, “A novel approach to the design of dual-band power divider with variable power dividing ratio based on coupled-lines,” Progress In Electromagnetics Research, vol. 103, pp. 271-284, 2010.
B. Li, “Dual-band equal/unequal wilkinson power dividers based on coupled-line section with shortcircuited stub,” Progress In Electromagnetics Research, vol. 111, pp. 163-178, 2011.
Y. Wu, Y. Liu, and Q. Xue, “An analytical approach for a novel coupled-line dual-band wilkinson power divider,” IEEE Trans. Microw. Theory Tech., vol. 59, no. 2, pp. 286-294, 2011.
P. Deng, J. Guo, and W. Kuo, “New wilkinson power dividers based on compact steppedimpedance transmission lines and shunt open stubs,” Progress In Electromagnetics Research, vol. 123, pp. 407-426, 2012.
H. Chen, and Y. Zhang, “A novel compact planar six-way power divider using folded and hybridexpanded coupled lines,” Progress In Electromagnetics Research, vol. 76, pp. 243-252, 2007.
A. S. Al-Zayed and S. F. Mahmoud, “Seven ports power divider with various power division ratios,” Progress In Electromagnetics Research, vol. 114, pp. 383-393, 2011.
Y. Wu, Y. Liu, Q. Xue, S. Li, and C. Yu, “Analytical design method of multi-way dual-band planar power dividers with arbitrary power division,” IEEE Trans. Microw. Theory Tech., vol. 58, no. 12, pp. 3832-3841, 2010.
Y. Wu, Y. Liu, S. Li, C. Yu, and X. Liu, “Closedform design method of an n-way dual-band wilkinson hybrid power divider,” Progress In Electromagnetics Research, vol. 101, pp. 97-114, 2010.
H. R. Ahn, “Asymmetric passive components in microwave integrated circuits,” New Jersey, WileyInterscience, chapter 7, pp. 170-185, 2006.
S. Rosloniec, “Three-port hybrid power dividers terminated in complex frequency-dependent impedances,” IEEE Trans. Microw. Theory Tech., vol. 44, no. 8, pp. 1490-1493, 1996.
X. Tang and K. Mouthaan, “Analysis and design of compact two-way wilkinson power dividers using coupled lines,” Asia–Pacific Microw. Conf., pp. 1319-1322, December 7-10, 2009.
M. J. Park, “Two-section cascaded coupled line wilkinson power divider for dual-band applications,” IEEE Microw. Wireless Compon. Lett., vol. 19, no. 4, pp. 188-190, 2009.
M. J. Park, “Dual-band wilkinson divider with coupled output port extensions,” IEEE Trans. Microw. Theory Tech., vol. 57, no. 9, pp. 2232- 2237, 2009.
M. Hayati, S. Roshani, and S. Roshani, “Miniaturized wilkinson power divider with nth harmonic suppression using front coupled tapered CMRC,” Applied Computational Electromagnetics Society (ACES) Journal, vol. 28, no. 3, pp. 221- 227, 2013.
D. Hawatmeh, K. A. Shamaileh, and N. Dib, “Design and analysis of multi-frequency unequalsplit wilkinson power divider using non-uniform transmission lines,” Applied Computational Electromagnetics Society (ACES) Journal, vol. 27, no. 3, pp. 248-255, 2012.
K. A. Shamaileh, A. Qaroot, N. Dib, and A. Sheta, “Design of miniaturized unequal split wilkinson power divider with harmonics suppression using non-uniform transmission lines,” Applied Computational Electromagnetics Society (ACES) Journal, vol. 26, no. 6, pp. 530-538, 2011.
Y. Wu, Y. Liu, and S. Li, “A dual-frequency transformer for complex impedances with two unequal sections,” IEEE Microw. Wireless Compon. Lett., vol. 19, no. 2, pp. 77-79, 2009.
T. A. Milligan, “Transmission-line transformation between arbitrary impedances,” IEEE Trans. Microw. Theory Tech., vol. 24, no. 3, pp. 159, 1976.
M. H. N. Potok, “Comments on transmission-line transformation between arbitrary impedances,” IEEE Trans. Microw. Theory Tech., vol. 25, no. 1, pp. 77, 1977.
