A CPW-Fed Band-Notched UWB Antenna with T-shape Construct and Matching Branches

作者

  • A. Chen School of Electronic and Information Engineering Beihang University, Beijing 100191, China
  • C. Yang School of Electronic and Information Engineering Beihang University, Beijing 100191, China
  • Z. Chen Department of Electrical and Computer Engineering Dalhousie University, Halifax, NS B3J 2X4, Canada
  • K. AN School of Electronic and Information Engineering Beihang University, Beijing 100191, China
  • J. Fang School of Electronic and Information Engineering Beihang University, Beijing 100191, China
  • W. Jiang School of Electronic and Information Engineering Beihang University, Beijing 100191, China

关键词:

Antenna, band notching, coplanar waveguide (CPW), impedance matching, ultra-wideband (UWB)

摘要

A compact coplanar waveguide (CPW) fed ultra-wideband (UWB) antenna with a bandnotched performance is presented in this paper. The band-notched UWB antenna is designed on a 26×34×1.6 mm3 substrate. It consists of a circle ring with a T-shape construct, three rectangular matching branches, a rectangular transition branch, and a CPW feed line. The antenna is simulated and the geometrical parameters of the antenna selected with Ansoft HFSS. The simulated results show the impedance bandwidth covers from 3.0 GHz to 11.0 GHz with the notched rejection band of 5.1 GHz - 5.8 GHz. A prototype was fabricated and tested. The measured and simulated results show that the proposed antenna gives bidirectional radiation pattern in the E-plane and omnidirectional radiation pattern in the Hplane with relatively flat gains in the pass-band. Due to its compact configuration, the antenna can find good UWB applications.

##plugins.generic.usageStats.downloads##

##plugins.generic.usageStats.noStats##

参考

First Report and Order, “Revision of Part 15 of the Commission’s Rule Regarding Ultra-Wideband Transmission systems FCC 02-48,” Federal Communication Commission, 2002.

M. Ghavami, L. Michael, and R. Kohno, IEEE Ultra Wideband Signals and Systems in Communication Engineering, New York: John Wiley and Sons, USA, 2004.

K. Lau, P. Li, and K. Man, “A monopolar patch antenna with very wide impedance bandwidth,” IEEE Trans. Antennas Propag., vol. 53, no. 3, pp. 1004-1010, Mar. 2005.

T. Ma and S. Jeng, “Planar miniature tapered-slotfed annular slot antennas for ultrawide-band radios,” IEEE Trans. Antennas Propag., vol. 53, no. 3, pp. 1194-1202, Mar. 2005.

H. Oraizi and S. Hedayti, “Miniaturized UWB monopole microstirp antenna design by the combination of Giusepe Peano and Sierpinski Carpet fractals,” IEEE Antennas Wireless Propag. Lett., vol. 10, pp. 67-70, 2011.

W. Weng, “Optimal design of an ultra-wideband antenna with the irregular shape on radiator using particle swarm optimization,” Applied Computational Electromagnetics Society Journal, vol. 27, no. 5, pp. 427-434, May 2012.

H. Schantz, G. Wolenec, and E. Myszka, “Frequency notched UWB antennas,” Ultra Wideband Systems and Technologies, pp. 214- 218, 2003.

C. Yu, W. Hong, L. Chiu, G. Zhai, C. Yu, W. Qin, and Z. Kuai, “Ultra wideband printed log-periodic dipole antenna with multiple notched bands,” IEEE Trans. Antennas Propag., vol. 59, no. 3, pp. 725-732, Mar. 2011.

C. Li and L. Ye, “Improved dual band-notched UWB slot antenna with controllable notched bandwidths,” Progress In Electromagnetics Reasearch, vol. 115, pp. 477-493, 2011.

M. Xie, Q. Guo, and Y. Wu, “Design of a miniaturized UWB antenna with band-notched and high frequency rejection capability,” J. of Electromagn. Wave and Appl., vol. 25, pp. 1103- 1112, 2011.

J. William and R. Nakkeeran, “A new UWB slot antenna with rejection of WiMax and WLAN bands,” Applied Computational Electromagnetics Society Journal, vol. 25, no. 9, pp. 787-793, Sept. 2010.

C. Hong, C. Ling, I. Tarn, and S. Chung, “Design of a planar ultra wideband antenna with a newnotch structure,” IEEE Trans. Antennas Propag., vol. 55, no. 12, pp. 3391-3397, Dec. 2007.

M. Ojaroudi, Sh. Yazdanifard, N. Ojaroudi, and R. Sadeghzadeh, “Band-notched small square-ring antenna with a pair of T-shaped strips protruded inside the square ring for UWB applications,” IEEE Antennas Wireless Propag. Lett., vol. 10, pp. 227-230, 2011.

M. Ojaroudi, N. Ojaroudi, and Y. Ebazadeh, Dual “Band-notch small square monopole antenna with enhanced bandwidth characteristics for UWB applications,” Applied Computational Electromagnetics Society Journal, vol. 27, no. 5, pp. 420-426, May 2012.

D. Kim, N. Jo, H. Jang, and C. Kim, “Design of the ultra wideband antenna with a quadruple-band rejection characteristics using a combination of the complementary split ring resonators,” Progress In Electromagnetics Reasearch, vol. 112, pp. 93-107, 2011.

Y. Li, W. Li, and W. Yu, “A switchable UWB slot antenna using SIS-HSIR and SIS-SIR for multimode wireless communications applications,” Applied Computational Electromagnetics Society Journal, vol. 27, no. 4, pp. 340-351, Apr. 2012.

W. Li, X. Shi, and Y. Hei, “Novel planar UWB monopole antenna with triple band-notched characteristics,” IEEE Antennas Wireless Propag. Lett., vol. 8, pp. 1094-1098, 2009.

Tz. Ma and S. Wu, “Ultrawideband band-notched folded strip monopole antenna,” IEEE Trans. Antennas Propag., vol. 55, no. 9, pp. 2473-2479, Sept. 2007.

##submission.downloads##

已出版

2021-09-03

##submission.howToCite##

[1]
A. . Chen, C. . Yang, Z. . Chen, K. . AN, J. . Fang, 和 W. . Jiang, 《A CPW-Fed Band-Notched UWB Antenna with T-shape Construct and Matching Branches》, ACES Journal, 卷 29, 期 02, 页 134–139, 9月 2021.

期

2014: Vol 29 Iss 2

栏目

General Submission