Design Optimization of Ultra-Wideband Vivaldi Antenna using Artificial Intelligence

作者

  • Peyman Mahouti Department of Electronics and Automation, İstanbul University- Cerrahpaşa, İstanbul, Turkey
  • Ahmet Kızılay Department of Electronic and Communication, Yıldız Technical University, İstanbul, Turkey
  • Ozlem Tari Department of Mathematics and Computer Science, İstanbul Arel University, İstanbul, Turkey
  • Aysu Belen Department of Hybrid and Electric Vehicles Technology, İskenderun Technical University, Hatay, Turkey
  • Mehmet A. Belen Department of Electric and Electronic, İskenderun Technical University, Hatay, Turkey
  • Alper Çalışkan Department of Electronic and Communication, Yıldız Technical University, İstanbul, Turkey

##plugins.pubIds.doi.readerDisplayName##:

https://doi.org/10.13052/2021.ACES.J.361211

关键词:

FreFrequency selective surface, Optimization, Surrogate modeling, Ultra-wideband, Vivaldi Antenna

摘要

In this work, computationally efficient design optimization of frequency selective surface (FSS)-loaded ultra-wideband Vivaldi antenna via the use of data-driven surrogate model is studied. The proposed design methodology consists of a multi-layer FSS structure aimed for performance improvement of the Vivaldi design, which makes the design a multi-objective multi-dimensional optimization problem. For having a fast and accurate optimization process, a data-driven surrogate model alongside the metaheuristic optimizer honeybee mating optimization (HBMO) had been used. The optimally designed antenna had been prototyped and its performance characteristics had been measured. The obtained experimental results are compared with the simulated results of the proposed method. Results show that the obtained FSS-loaded structure has enhanced directivity compared with the design without FSS structure, without any performance losses in the return loss characteristics. The FSS-loaded Vivaldi antenna operates at 2–12 GHz band with a maximum gain of 10 dBi at 10 GHz which makes the design a good solution for RADAR applications.

##plugins.generic.usageStats.downloads##

##plugins.generic.usageStats.noStats##

##submission.authorBiographies##

##submission.authorWithAffiliation##

Peyman Mahouti received his M. Sc. And Ph.D. degree in Electronics and Communication Engineering from the Yıldız Technical University, Turkey, in 2013 and 2016, Respectivly. He is currently an Associated Professor with the Department of Electronic and Communication, Istanbul University - Cerrahpasa, Turkey. The main research areas are analytical and numerical modelling of microwave devices, optimization techniques for microwave stages, and application of artificial intelligence-based algorithms. His research interests include analytical and numerical modelling of microwave and antenna structures, surrogate-based optimization, and application of artificial intelligence algorithms.

##submission.authorWithAffiliation##

Ahmet Kizilay was born in Istanbul, Turkey, in 1969. He received B.Sc. degree in Electronics and Communications Engineering from Yildiz University in 1990, M.Sc. and Ph.D. degrees in Electrical Engineering from Michigan State University in 1994 and 2000, respectively.

In July 2001, he joined the Department of Electronics and Communications Engineering at Yildiz Technical University, where he is currently working as Professor. His main research interests include time domain electromagnetic scattering, electromagnetic wave theory, and fiber optics.

##submission.authorWithAffiliation##

Özlem Tari received her B.Sc., M.Sc. and Ph.D. in Physics Engineering from the Istanbul Technical University (ITU). She was the recipient of the Universidad Carlos III de Madrid Research Fellowship award before accepting her position at Istanbul Arel University in 2010. Her research areas are the phase transitions and phase diagram of some physical systems, Multi-Objective Optimization problems and development of Meta-Heuristic Optimization Algorithms.

##submission.authorWithAffiliation##

Aysu Belen received his Ph.D. degree in Electronics and Communication Engineering from the Yıldız Technical University in 2021. Currently, she is a Lecturer in İskenderun Technical University. Her main research areas are optimization of microwave circuits, circuits, device modeling, and computer aided circuit design and microwave amplifiers.

##submission.authorWithAffiliation##

Mehmet Ali Belen received his Ph.D degree in Electronics and Communication engineering from the Yıldız Technical University in 2016. He is currently an Associated Prof. in İskenderun Technical University. His current activities include teaching and researching Electromagnetics and Microwaves along with developing Additive Manufacturing 3D Printed Microwave Components for Rapid Prototyping. His current research interests are in the areas of multivariable network theory, device modeling, computer aided microwave circuit design, monolithic microwave integrated circuits, and antenna arrays, active/passive microwave components especially in the field of metamaterial- based antennas and microwave filters.

##submission.authorWithAffiliation##

Alper Çalıışkan received his Ph.D. degree in Electronics and Communication Engineering from the Yıldız Technical University in 2019. The main research areas are optimization of microwave circuits, broadband matching circuits, device modeling, and computer aided circuit design, microwave amplifiers.

参考

M. Moosazadeh, S. Kharkovsky, J. T. Case, and B. Samali, “Improved radiation characteristics of small antipodal vivaldi antenna for microwave and millimeter-wave imaging applications,” IEEE Antennas Wireless Propag. Lett., vol. 16, pp. 1961-1964, 2017.

F. Zhang, G.-Y. Fang, Y.-C. Ji, H.-J. Ju, and J.-J. Shao, “A novel compact double exponentially tapered slot antenna (DETSA) for GPR applications,” IEEE Antennas Wireless Propag. Lett., vol. 10, pp. 195-198, 2011.

L. Guo, H. Yang, Q. Zhang, and M. Deng, “A compact antipodal tapered slot antenna with artificial material lens and reflector for GPR applications,” IEEE Access, vol. 6, pp. 44244-44251, 2018.

K. Kim, W. R. Scott, and S. Member, “Design of a Resistively loaded Vee dipole for radar applications,” IEEE Trans. Antennas Propag., vol. 53, no. 8, pp. 2525-2532, Aug. 2005.

M. Serhir and D. Lesselier, “Wideband reflector-backed folded bowtie antenna for ground penetrating radar,” IEEE Trans. Antennas Propag., vol. 66, no. 3, pp. 1056-1063, Mar. 2018.

L. Guo, B. Xiao, M. Li, H. Yang, and H. Lin, “A high-gain and frequency tunable bow tie antenna with epsilon-negative metasurface,” J. Electromagn. Waves Appl., vol. 29, no. 5, pp. 693-702, Mar. 2015.

L. Sang, X. Li, T. Chen, and G. Lv, “Analysis and design of tapered slot antenna with high gain for ultra-wideband based on optimisation of the metamaterial unit layout,” IET Microw. Antennas Propag., vol. 11, no. 6, pp. 907-914, May 2017.

A. Z. Hood, T. Karacolak, and E. Topsakal, “A small antipodal vivaldi antenna for ultrawide-band applications,” IEEE Antennas Wireless Propag. Lett., vol. 7, pp. 656-660, 2008.

H. Cheng, H. Yang, Y. Li and Y. Chen, “A compact vivaldi antenna with artificial material lens and sidelobe suppressor for GPR applications,” IEEE Access, vol. 8, pp. 64056-64063, 2020. doi: 10.1109/ACCESS.2020.2984010.

G. Teni, N. Zhang, J. Qiu, and P. Zhang, “Research on a novel miniaturized antipodal Vivaldi,” IEEE Antennas Wireless Propag. Lett., vol. 12, pp. 417-420, 2013.

J. Bourqui, M. Okoniewski, and E. C. Fear, “Balanced antipodal vivaldi antenna with dielectric director for near-field microwave imaging,” IEEE Trans. Antennas Propag., vol. 58, no. 7, pp. 2318-2326, Jul. 2010.

B. Zhou and T. J. Cui, “Directivity enhancement to vivaldi antennas using compactly anisotropic zero-index metamaterials,” IEEE Antennas Wireless Propag. Lett., vol. 10, pp. 326-329, 2011.

S. Kundu, A. Chatterjee, S. K. Jana, and S. K. Parui, “A compact umbrellashaped UWB antenna with gain augmentation using frequency selective surface,” Radioengineering, vol. 27, no. 2, pp. 448-454, Jun. 2018.

E. Erfani, M. Niroo-jazi, and S. Tatu, “A high-gain broadband gradient efractive index metasurface lens antenna,” IEEE Trans. Antennas Propag., vol. 64, no. 5, pp. 1968-1973, May 2016.

H. Cheng, H. Yang, Y. Li and Y. Chen, “A compact vivaldi antenna with artificial material lens and sidelobe suppressor for GPR applications,” IEEE Access, vol. 8, pp. 64056-64063, 2020.

P. Mahouti, “Design optimization of a pattern reconfigurable microstrip antenna using differential evolution and 3D EM simulation‐based neural network model,” Int. J. RF Microw. Comput. Aided Eng., vol. 29, e21796, 2019. https://doi.org/10.1002/mmce.21796.

J. Wang, X. S. Yang, and B. Z. Wang, “Efficient gradient-based optimization of pixel antenna with large-scale connections,” IET Microwaves Ant. Prop., vol. 12, no. 3, pp. 385-389, 2018.

M. Rossi, A. Dierck, H. Rogier, and D. Vande Ginste, “A stochastic framework for the variability analysis of textile antennas,” IEEE Trans. Ant. Prop., vol. 62, no. 16, pp. 6510-6514, 2014.

J. S. Ochoa and A. C. Cangellaris, “Random-space dimensionality reduction for expedient yield estimation of passive microwave structures,” IEEE Trans. Microwave Theory Techn., vol. 61, no. 12, pp. 4313-4321, 2013.

J. Dong, W. Qin, and M. Wang, “Fast multi-objective optimization of multi-parameter antenna structures based on improved BPNN surrogate model,” IEEE Access, vol. 7, pp. 77692-77701, 2019.

J. L. Chávez-Hurtado and J. E. Rayas-Sánchez, “Polynomial-based surrogate modeling of RF and microwave circuits in frequency domain exploiting the multinomial theorem,” IEEE Trans. Microwave Theory Tech., vol. 64, no. 12, pp. 4371-4381, 2016.

N. V. Queipo, R. T. Haftka, W. Shyy, T. Goel, R. Vaidynathan, and P. K. Tucker, “Surrogate-based analysis and optimization,” Progress in Aerospace Sciences, vol. 41, no. 1, pp. 1-28, 2005.

P. Barmuta, F. Ferranti, G. P. Gibiino, A. Lewandowski, and D. M. M. P. Schreurs, “Compact behavioral models of nonlinear active devices using response surface methodology,” IEEE Trans. Microwave Theory and Tech., vol. 63, no. 1, pp. 56-64, 2015.

J. Cai, J. King, C. Yu, J. Liu, and L. Sun, “Support vector regressionbased behavioral modeling technique for RF power transistors,” IEEE Microwave and Wireless Comp. Lett., vol. 28, no. 5, pp. 428-430, 2018.

A. Petrocchi, A. Kaintura, G. Avolio, D. Spina, T. Dhaene, A. Raffo, and D. M. P.-P. Schreurs, “Measurement uncertainty propagation in transistor model parameters via polynomial chaos expansion,” IEEE Microwave Wireless Comp. Lett., vol. 27, no. 6, pp. 572-574, 2017.

J. E. Rayas-Sanchez and V. Gutierrez-Ayala, “EM-based statistical analysis and yield estimation using linear-input and neural-output space mapping,” IEEE MTT-S Int. Microwave Symp. Digest (IMS), pp. 1597-1600, 2006.

P. Mahouti, A. Kızılay, O. Tari, A. Belen, M. A. Belen, “Design optimization of ultra wide band vivaldi antenna using artificial intelligence,” International Applied Computational Electromagnetics Society (ACES) Symposium, pp. 1-4, 2021. doi: 10.1109/ACES53325.2021.00164.

X. Zhang, Y. Chen, M. Tian, J. Liu, and H. Liu, “A compact wide-band antipodal Vivaldi antenna design,” Int. J. RF Microw. Comput. Aided Eng., vol. 29, e21598, 2019. https://doi.org/10.1002/mmce.21598.

F. Güneş, İ. Ö. Evranos, M. A. Belen, P. Mahouti, and M. Palandöken, “A compact triband antipodal vivaldi antenna with frequency selective surface inspired director for IoT/WLAN applications,” Wireless Netw., vol. 27, pp. 3195-3205, 2021.

F. Güneş, S. Demirel, and P. Mahouti, “A simple and efficient honey bee mating optimization approach to performance characterization of a microwave transistor for the maximum power delivery and required noise,” Int. J. Numer. Model., vol. 29, pp. 4-20, 2016.

F. Güneş, S. Demirel, and P. Mahouti, “Design of a front-end amplifier for the maximum power delivery and required noise by HBMO with support vector microstrip model,” Radioengineering, vol. 23, no. 1, pp. 134-143, 2014.

X. Li, G. Liu, Y. Zhang, L. Sang, G. Lv, “A compact multi-layer phase correcting lens to improve directive radiation of Vivaldi antenna,” Int. J. RF Microw. Comput. Aided Eng., 2017.

D. M. Elsheakh, E. A. Abdallah, “Ultrawideband vivaldi antenna for DVB-T, WLAN, and WiMAX applications,” International Journal of Antennas and Propagation, vol. 8, pp. 1-7, 2014.

J. Schneider, M. Mrnka, J. Gamec, M. Gamcova, Z. Raida, “Vivaldi antenna for RF energy harvesting,” Radioengineering, vol. 25, no. 4, pp. 666-671, 2016.

R. Bulgaroni, W. M. Torres, H. X. de Araujo, I. R. S. Casella, C. E. Capovilla, “Low-cost quad-band dual antipodal Vivaldi antenna using microstrip to CPS transition,” Microw. Opt. Technol. Lett., vol. 60, pp. 2315-2320, 2018.

A. S. Arezoomand, R. A Sadeghzadeh, M. N. Moghadasi, “Investigation and improvement of the phase‐center characteristics of VIVALDI’s antenna for UWB applications,” Microw. Opt. Tech. Lett., vol. 58, no. 6, pp. 1275-1281, 2016.

R. Natarajan , M. Kanagasabai, M. Gulam, N. Alsath, “Dual mode antipodal Vivaldi antenna,” in IET Microwaves, Antennas & Propagation, vol. 10, no. 15, pp. 1643-1647, 2016.

Z. Li, C. Yin, X. Zhu, “Compact UWB MIMO vivaldi antenna with dual band-notched characteristics,” in IEEE Access, vol. 7, pp. 38696-38701, 2019.

H. Zhu, X. Li, L. Yao, and J. Xiao, “A novel dielectric loaded vivaldi antenna with improved radiation characteristics for UWB application” Applied Computational Electromagnetics Society Journal, vol. 33, no. 4, pp. 394-399, 2018.

Y. Zhu, D. Su, W. Xie, Z. Liu, and K. Zuo, “Design of a novel miniaturized vivaldi antenna with loading resistance for ultra wideband (UWB) applications” Applied Computational Electromagnetics Society Journal, vol. 32, no. 10, pp. 895-900, 2017.

##submission.downloads##

已出版

2022-03-10