Design of Compact SITLs Low Pass Filter by Using Invasive Weed Optimization (IWO) Technique

作者

  • Hamid Reza Khakzad School of Electrical and Electronic Engineering, Iran University of Science and Technology, Tehran, Iran
  • Seyed Hassan Sedighy School of Electrical and Electronic Engineering, Iran University of Science and Technology, Tehran, Iran
  • Mohammad Khalaj Amirhosseini School of Electrical and Electronic Engineering, Iran University of Science and Technology, Tehran, Iran

关键词:

Invasive weed optimization, low pass filter, step impedance transmission line

摘要

Step impedance transmission line (SITL) is optimized by Invasive Weed Optimization (IWO) technique to compact a low pass microstrip filter (LPF). In the proposed method, the uniform microstrip lines in the LPF structure are replaced by optimized SITLs. The equality of SITL and uniform transmission line gives two additional design parameters, which are optimized by IWO method to achieve the most compact SITLs. Finally, a compact high degree LPF is designed and fabricated with the area reduction of more than 70%. The measurement results of the fabricated LPF are in good agreement with the simulation ones.

##plugins.generic.usageStats.downloads##

##plugins.generic.usageStats.noStats##

参考

D. M. Pozar, Microwave Engineering, Second Edition, Wiley, 1998.

J. Lin Li , J. Xin Chen, Q. Xue, J. P. Wang, W. Shao, and L. J. Xue, “Compact microstrip low pass filter based on defected ground structure and compensated microstrip line,” IEEE MTT-S International Microwave Symposium Digest, pp. 1483-1486, 2005.

C. C. Chen, C. Kuang, and C. Tzuang, “Synthetic quasi-TEM meandered transmission lines for compacted microwave integrated circuits,” IEEE Transaction on Microwave Theory and Techniques, vol. 52, no. 6, pp. 1637-1647, 2004.

Q. Xue, K. M. Shum, and C. H. Chan, “Novel 1-D microstrip PBG cells,” IEEE Microwave and Wireless Component Letters, vol. 10, no. 10, pp. 403-405, 2000.

F. R. Yang, Y. Qian, and T. Itoh, “A novel uniplanar compact PBG structure for filter and mixer applications,” IEEE MTT International Microwave Symposium Digest, vol. 3, pp. 919-922, 1999.

S. K. Gupta and K. J. Vinoy, “A compact defected ground microstrip device with photonic bandgap effects,” J. of Electromagn. Waves and Appl., vol. 23, pp. 255-266, 2009.

M. Challal, A. Boutejdar, M. Dehmas, A. Azrar, and A. Omar, “Compact microstrip low-pass filter design with ultra-wide reject band using a novel quarter-circle DGS shape,” Applied Computational Electromagnetics Society (ACES) Journal, vol. 27, no. 10, pp. 808-815, Oct. 2012.

G. E. Al-Omair, S. F. Mahmoud, and A. S. AlZayed, “Lowpass and bandpass filter designs based on DGS with complementary split ring resonators,” Applied Computational Electromagnetics Society (ACES) Journal, vol. 26, no. 11, pp. 907-914, Nov. 2011.

M. Al Sharkawy, A. Boutejdar, F. Alhefnawi, and O. Luxor, “Improvement of compactness of lowpass/bandpass filter using a new electromagnetic coupled crescent defected ground structure resonators,” Applied Computational Electromagnetics Society (ACES) Journal, vol. 25, no. 7, pp. 570-577, July 2010.

N. M. Garmjani and N. Komjani, “Improved microstrip folded tri-section stepped impedance resonator bandpass filter using defected ground structure,” Applied Computational Electromagnetics Society (ACES) Journal, vol. 25, no. 11, pp. 975-983, Nov. 2010.

Y. J. Sung, C. S. Ahn, and Y. -S. Kim, “Size reduction and harmonic suppression of rat race coupler hybrid coupler using defected ground structure,” IEEE Microwave and Wireless Component Letters, vol. 14, no.1, pp. 7-9, 2004.

X. H. Wang and B. Z. Wang, “Compact broadband dual-band bandpass filters using slotted ground structures,” Progress In Electromagnetics Research, PIER, vol. 82, pp. 151-166, 2008.

T. Yang, C. Liu, L. Yan, and K. Huang, “A compact dual-band power divider using planar artificial transmission lines for GSM/DCS applications,” Progress In Electromagnetics Research Letters, vol. 10, pp. 185-191, 2009.

P. Hajizade, H. R. Hassani, and S. H. Sedighy, “Compact quasi-Yagi antenna loaded with artificial transmission lines for RFID applications,” IEEE International Symposium on APS, pp. 1-2, 2012.

H. W. Liu, L. Y. Li, X. H. Li, and S. X. Wang, “Compact microstrip lowpass filter using asymmetric stepped-impedance hairpin resonator and slotted grounded plane,” J. of Electromagn. Waves and Appl., vol. 22, pp. 1615-1622, 2008.

M. H. Yang, J. Xu, Q. Zhao, L. Peng, and G. P. Li, “Compact broad stopband low pass filters using SIRS-loaded circular hairpin resonators,” Progress In Electromagnetics Research, PIER, vol. 102, pp. 95-106, 2010.

S. H. Sedighy and M. Khalaj-Amirhosseini, “Compact Wilkinson power divider using stepped impedance transmission lines,” J. of Electromagnetics Waves and Appl., vol. 25, pp.1773-1782, 2011.

S. H. Sedighy, A. R. Mallahzadeh, M. Soleimani, and J. Rashed-Mohassel, “Optimization of printed Yagi antenna using invasive weed optimization (IWO),” IEEE Antennas and Wireless Propagation Letters, vol. 9, pp. 1275-1278, 2010.

A. R. Mehrabian and C. Lucas, “A novel numerical optimization algorithm inspired from weed colonization,” Ecol. Inform., vol. 1, pp. 355-366, 2006.

S. Karimkashi and A. Kishk, “Invasive weed optimization and its features in electromagnetics,” IEEE Transaction on Antennas and Propagation, vol. 58, no. 4, pp. 1269-1278, 2010.

A. R. Mallahzadeh, S. Es’haghi, and H. R. Hassani, “Compact U-array MIMO antenna designs using IWO algorithm,” Int. J. RF Microw. Comput., vol. 15, no. 5, pp. 568-576, 2009.

##submission.downloads##

已出版

2021-10-06

栏目

General Submission