Bandwidth Enhancement of Small Square Monopole Antenna with Dual Band-Notched Characterestics Using H-Ring Slot and Conductor Backed Plane for UWB Applications

作者

  • Mohammad Ojaroudi Young Researchers Club Ardabil Branch, Islamic Azad University, Ardabil, Iran
  • Nasser Ojaroudi Department of Electrical Engineering Ardabil Branch, Islamic Azad University, Ardabil, Iran
  • Seyed Amin Mirhashemi Department of Electrical Engineering South Tehran Branch, Islamic Azad University, Tehran, Iran

关键词:

H-ring parasitic structure, H-ring slot, microstrip-fed monopole antenna, ultrawideband (UWB) applications

摘要

This article proposes a novel printed monopole antenna for ultra wideband applications with dual band-notch function. The antenna consists of a square radiating patch and a ground plane with H-ring slot and conductor backed plane, which provides a wide usable fractional bandwidth of more than 125% (2.89-13.43 GHz). In order to generate single band-notched characteristic, we use an H-shaped conductor backed plane on the other side of the substrate. By converting this H-shaped conductor backed plane to H-ring form, a dual band-notched function is achieved and also by inserting an H- ring slot in the ground plane, additional resonances are excited and hence much wider impedance bandwidth can be produced, especially at the higher band. The measured results reveal that the presented dual band-notched monopole antenna offers a wide bandwidth with two notched bands, covering all the 5.2/5.8GHz WLAN, 3.5/5.5 GHz WiMAX and 4-GHz C bands. The designed antenna has a small size of 12×18 mm 2 .

##plugins.generic.usageStats.downloads##

##plugins.generic.usageStats.noStats##

参考

N. Ojaroudi, M. Ojaroudi, and S. Amiri, “Enhanced bandwidth of small square monopole antenna by using inverted U-shaped slot and conductor-backed plane,” Appl. Comp. Electro. Soc. (ACES) Journal, vol. 27, no. 8, pp. 685-690, August 2012.

J. Jung, W. Choi, and J. Choi, “A compact broadband antenna with an L-shaped notch,” IEICE Trans. Commun., vol. E89-B, no. 6, pp. 1968-1971, June 2006.

N. Ojaroudi, M. Ojaroudi, and N. Ghadimi, “UWB omnidirectional square monopole antenna for use in circular cylindrical microwave imaging systems,” IEEE Antennas Wireless Propag. Lett., vol. 11, pp. 1350-1353, 2012.

R. Azim, M. T. Islam, and N. Misran, “Design of a planar UWB antenna with new band enhancement technique,” Appl. Comp. Electro. Soc. (ACES) Journal, vol. 26, no. 10, pp. 856-862, Oct. 2011.

D. S. Javan and O. H. Ghouchani, “Cross slot antenna with U-shaped tuning stub for ultra wideband applications,” Appl. Comp. Electro. Soc. (ACES) Journal, vol. 24, no. 4, pp. 427-432, Aug. 2009.

M. Ojaroudi, “Printed monopole antenna with a novel band-notched folded trapezoid ultrawideband,” J. of Electro. Waves and Appl., vol. 23, pp. 2513-2522, 2009.

J. William and R. Nakkeeran, “A new UWB slot antenna with rejection of WiMax and WLAN bands,” Appl. Comp. Electro. Soc. (ACES) Journal, vol. 25, no. 9, pp. 787-793, Sep. 2010.

M. Naghshvarian-Jahromi and N. KomjaniBarchloui, “Analysis of the behavior of Sierpinski carpet monopole antenna,” Appl. Comp. Electro. Soc. (ACES) Journal, vol. 24, no. 1, pp. 32-36, Feb. 2009.

Ansoft High Frequency Structure Simulation (HFSSTM), Ver. 13, Ansoft Corporation, 2010.

M. C. Tang, S. Xiao, T. Deng, D. Wang, J. Guan, B. Wang, and G. D. Ge, “Compact UWB antenna with multiple band-notches for WiMAX and WLAN,” IEEE Trans. Antennas and Propag., vol. 59, no. 4, pp. 1372-1376, 2011.

A. Ghazi, M. N. Azarmanesh, and M. Ojaroudi, “Muti-resonance square monopole antenna for ultra-wideband applications,” Progress In Electromagnetics Research (PIER C), vol. 14, pp. 103-113, 2010.

M. Ojaroudi, N. Ojaroudi, and Y. Ebazadeh, “Dual band-notch small square monopole antenna with enhanced bandwidth characteristics for UWB applications,” Appl. Comp. Electro. Soc. (ACES) Journal, vol. 25, no.5, pp. 420-426, May 2012.

##submission.downloads##

已出版

2021-10-09

栏目

General Submission