T-Junction Power Divider Based on Rectangular Microcoaxial Structure in W-band

作者

  • Zhao-Yu Huang College of Electronic Science and Technology National University of Defense Technology, Changsha, 410073, China
  • Bo-Yuan Liu College of Electronic Science and Technology National University of Defense Technology, Changsha, 410073, China
  • Yun Jiang College of Electronic Science and Technology National University of Defense Technology, Changsha, 410073, China
  • Wen-Tao Yuan College of Electronic Science and Technology National University of Defense Technology, Changsha, 410073, China
  • Qing-Ping Wang College of Electronic Science and Technology National University of Defense Technology, Changsha, 410073, China
  • Wei-Dong Hu College of Electronic Science and Technology National University of Defense Technology, Changsha, 410073, China
  • Nai-Chang Yuan College of Electronic Science and Technology National University of Defense Technology, Changsha, 410073, China

##plugins.pubIds.doi.readerDisplayName##:

https://doi.org/10.13052/2021.ACES.J.361011

关键词:

Power divider, rectangular microcoaxial structure, W band.

摘要

In this paper, a W-band T-junction power divider based on rectangular microcoaxial structure is proposed. Rectangular microcoaxial line is a three dimensional (3D) structure with the merits of wide operation bandwidth, low loss and high integration, which is suitable for the design of radio frequency (RF) devices. A two-way power divider is designed based on the rectangular microcoaxial structure. And the two-way power divider is expanded into a four-way power divider to further illustrate the design method. Moreover, a back-to-back configuration including two identical two-way power divider is fabricated and measured. The insertion loss of the back-to-back configuration is about 0.11-1.18 dB in W band, which agrees with the simulation one reasonably and shows good performance.

##plugins.generic.usageStats.downloads##

##plugins.generic.usageStats.noStats##

##submission.authorBiographies##

##submission.authorWithAffiliation##

Zhao-Yu Huang was born in 1992. He received the M.S. degree in Electronics and Communication Engineering from the University of Electronic Science and Technology of China, Chengdu, China in 2018. He is currently working toward Ph.D. degree with the College of Electronic Science and Technology, National University of Defense Technology, Changsha, China. His current research interests include passive RF/microwave circuits, microstrip antennas, and wireless communication.

##submission.authorWithAffiliation##

Bo-Yuan Liu was born in 1991. He has received Master’s Degree from University of Electronic Science and Technology, China and currently working toward the Doctor’s Degree in National University of Defense Technology. His research interests are microwave and millimeter wave circuits and systems, Radar guidance, electronic countermeasures, and electromagnetic technology.

##submission.authorWithAffiliation##

Yun Jiang was born in Hunan Province, China. He received the M.S. degree in electronics engineering from the University of Electronic Science and Technology of China (UESTC), Chengdu, China, in 2017, and currently he is working toward the Ph.D. degree in National University of Defense technology. His research interests include RF/millimeter-wave components and circuits.

##submission.authorWithAffiliation##

Wen-Tao Yuan was born in 1990. He received his M.S. degree in Computer Science and Technology from the Anhui Normal University in 2016. Currently he is working towards the Ph.D. degree in the College of Electronic Science and Technology, National University of Defense Technology, Changsha, Hunan, China. His research interests include passive microwave circuits design and wireless communication.

##submission.authorWithAffiliation##

Qing-Ping Wang was born in 1988. He received the Ph.D. degree from National University of Defense Technology. He is currently an associate researcher with the National University of Defense Technology. His research interests include automatic target recognition, microwave circuits and systems.

##submission.authorWithAffiliation##

Wei-Dong Hu was born in 1967. He received the Ph.D. degree from National University of Defense Technology in 1997. He is currently a Professor with the National University of Defense Technology. His research interests include microwave and millimeter-wave circuits and systems and radar information processing.

##submission.authorWithAffiliation##

Nai-Chang Yuan was born in Anhui, China, in 1965. He received the M.S. and Ph.D. degrees in electronic science and technology from the University of Electronic Science and Technology of China in 1991 and 1994, respectively. He is currently a Professor with the National University of Defense Technology. His research interests include microwave passive components, active components, antennas, microwave monolithic integrated circuits (MMICs), and RF integrated circuits (RFICs).

参考

Y. Jiang, Y. Ye, D. T. Li, Z. Y. Huang, C. Wang, J. J. Huang and N. C. Yuan, “Design of W-band PIN Diode SPDT Switch with Low Loss,” Applied Computational Electromagnetics Society (ACES) Journal, vol. 36, no. 7, pp. 901-907, July 2021.

T. Huang, D. Jiang and H. Z. Hu, “Wideband Power Divider Using Novel Split-Ring Resonator,” Applied Computational Electromagnetics Society (ACES) Journal, vol. 30, no. 2, pp. 204-207, Feb. 2015.

Y. L. Wu, J. C. Li and Y. N. Liu, “A Simple Coupled-Line Wilkinson Power Divider for Arbitrary Complex Input and Output Terminated Impedances,” Applied Computational Electro-magnetics Society (ACES) Journal, vol. 29, no. 7, pp. 565-570, July 2014.

L. Li, J. X. Li, X. Y. Wei and A. X. Zhang, “A W-band broadband power divider/combiner using two parallel antisymmetric tapered probes,” Int J RF Microw Comput Aided Eng., vol. 28, no. 1, pp. 1-9, Jan. 2017.

Z. Y. Huang, Y. Jiang, J. J. Huang, W. D. Hu and N. C. Yuan, “Flexible design of W-band bandpass filter with multiple transmission zeros,” Microw Opt Technol Lett., vol. 63, no. 9, pp. 2355-2358, Sep. 2021.

Y. G. Li, Y. H. Zhang, G. D. Zhu, Z. Sun and Y. Fan, “A W-band miniature power divider based on E-faced-folded magic-T junction,” 2016 IEEE MTT-S International Microwave Workshop Series on Advanced Materials and Processes for RF and THz Applications (IMWS-AMP), Chengdu, China, pp. 1-3, 2016.

J. Zhan, M. Z. Zhan and W. D. He, “W-band Radial Power Combiner based on Circularly Polarized TE11 Mode,” 2019 IEEE MTT-S International Wireless Symposium (IWS), Guangzhou, China, pp. 1-3, 2019.

S. Y. Hu, K. J. Song, F. Zhang, Y. Zhu and Y. Fan, “A novel compact wideband four-way W-band waveguide power divider with low insertion loss,” 2016 IEEE MTT-S International Microwave Workshop Series on Advanced Materials and Processes for RF and THz Applications (IMWS-AMP), Chengdu, China, pp. 1-3, 2016.

T. X. Su, C. J. Yu and M. H. Zhao, “W-band four-way E-plane waveguide power divider,” 2016 IEEE MTT-S International Microwave Workshop Series on Advanced Materials and Processes for RF and THz Applications (IMWS-AMP), Chengdu, China, pp. 1-3, 2016.

L. J. Zhang and T. Liu, “A New H-plane T-junction Waveguide Power Divider Covering the Full W-band,” 2020 IEEE 3rd International Conference on Electronic Information and Communication Technology (ICEICT), Shenzhen, China, pp. 803-805, 2020.

J. Li, Y. J. Huang and G. J. Wen, “W-band longitudinal-slot coupling four-way SIW power combiner /divider,” 2017 International Applied Computational Electromagnetics Society Symposium (ACES), Suzhou, China, pp. 1-2, 2017.

Y. Li, P. L. Kirby, O. Offranc and J. Papapolymerou, “Silicon Micromachined W-Band Hybrid Coupler and Power Divider Using DRIE Technique,” IEEE Microw. Wireless Compon. Lett., vol. 18, no. 1, pp. 22-24, Jan. 2008.

E. R. Brown, A. L. Cohen, C. A. Bang, M. S. Lockard, B. W. Byrne, N. M. Vandelli, D. S. McPherson and G. Zhang, “Characteristics of Microfabricated rectangular coax in the Ka band”, Microw Opt Technol Lett., vol. 40, no. 5, pp. 365-368, Mar. 2004.

N. A. Sutton and D. S. Filipovic, “Wideband micromachined broadside coupled Schiffman phase shifter”, Electron let., vol. 50, no. 6, pp. 454-U115, Mar. 2014.

J. R. Reid, E. D. Marsh and R. T. Webster, “Micromachined rectangular-coaxial transmission lines,” IEEE Trans Microw Theory Tech., vol. 54, no. 8, pp. 3433-3442, Aug. 2006.

K. Chen, B. Yan and R. M. Xu, “A novel W-band ultra-wideband substrate integrated waveguide (SIW) T-junction power divider,” 2010 International Symposium on Signals, Systems and Electronics, Nanjing, China, pp. 1-3, 2010.

J. X. Li, L. Li, L. Lu, H. Y Shi, H. H. Huo and A. X. Zhang, “Four-way waveguide power divider design for W-band applications,” Int J RF Microw Comput Aided Eng., vol. 28, no. 5, pp. 1-5, Jun. 2018.

##submission.downloads##

已出版

2021-11-21

栏目

General Submission