A Compact Multi-Probe Reverberation Chamber for Over-the-Air Testing

作者

  • Wenjun Qi College of Electronic and Information Engineering Nanjing University of Aeronautics and Astronautics, Nanjing 211106, China
  • Feng Fang College of Electronic and Information Engineering Nanjing University of Aeronautics and Astronautics, Nanjing 211106, China
  • Wenjun Xia College of Electronic and Information Engineering Nanjing University of Aeronautics and Astronautics, Nanjing 211106, China
  • Yongjiu Zhao College of Electronic and Information Engineering Nanjing University of Aeronautics and Astronautics, Nanjing 211106, China
  • Lei Xing College of Electronic and Information Engineering Nanjing University of Aeronautics and Astronautics, Nanjing 211106, China
  • Qian Xu College of Electronic and Information Engineering Nanjing University of Aeronautics and Astronautics, Nanjing 211106, China

关键词:

Compact, multi-probe RC, OTA

摘要

In this paper, a compact multi-probe reverberation chamber (RC) is proposed for over-the-air (OTA) testing. 16 probe antennas are used to reduce the measurement time. Typical parameters of the RC, such as field uniformity (FU), quality factor (Q factor), and independent samples are given. Total radiated power (TRP) and pattern correlation measurements have been performed to validate the RC system.

##plugins.generic.usageStats.downloads##

##plugins.generic.usageStats.noStats##

参考

D. A. Hill, Electromagnetic Fields in Cavities: Deterministic and Statistical Theories. Hoboken, NJ, USA, 2009.

Q. Xu and Y. Huang, Anechoic and Reverberation Chambers: Theory, Design and Measurements. Wiley-IEEE, UK, 2019.

P. Corona, G. Latmiral, E. Paolini, and L. Piccioli, “Use of a reverberating enclosure for measurements of radiated power in the microwave range,” IEEE Trans. Electromagn. Compat., vol. EMC-18, no. 2, pp. 54-59, May 1976.

W. Li, C. Yue, and W. Yu, “Study on array source stirring reverberation chamber,” Applied Computational Electromagnetics Society Journal, vol. 29, no. 12, pp. 1067-1076, Dec. 2014.

X. Chen, J. Tang, T. Li, S. Zhu, Y. Ren, Z. Zhang, and A. Zhang, “Reverberation chambers for overthe-air tests: An overview of two decades of research,” IEEE Access, vol. 6, pp. 49129-49143, Aug. 2018.

W. Fan, X. C. B. de Lisbona, F. Sun, J. O. Nielsen, M. B. Knudsen, and G. F. Pedersen, “Emulating spatial characteristics of MIMO channels for OTA testing,” IEEE Trans. Antennas Propag., vol. 61, no. 8, pp. 4306-4314, Aug. 2013.

W. Yu, Y. Qi, K. Liu, Y. Xu, and J. Fan, “Radiated two-stage method for LTE MIMO user equipment performance evaluation,” IEEE Trans. Electromagn. Compat., vol. 56, no. 6, pp. 1691-1696, Dec. 2014.

IEC 61000-4-21, Electromagnetic compatibility (EMC) – Part 4-21: Testing and measurement techniques – Reverberation chamber test methods, IEC Standard, Ed 2.0, 2011-01.

CTIA, Test Plan for Wireless Large-Form-Factor Device Over-the-Air Performance, ver. 1.2.1, Feb. 2019.

H. G. Krauthauser, “On the measurement of total radiated power in uncalibrated reverberation chambers,” IEEE Trans. Electromagn. Compat., vol. 49, no. 2, pp. 270-279, June 2007.

Q. Xu, L. Xing, D. Yan, Y. Zhao, and Y. Huang, “Experimental verification of stirrer angular correlation with different definitions in a reverberation chamber,” the 12th International Symposium on Antennas, Propag. and EM Theory (ISAPE 2018), Hangzhou, China, pp. 1-5, Feb. 2018.

K. Karlsson, X. Chen, J. Carlsson, and A. Skarbratt, “On OTA test in the presence of doppler spreads in a reverberation chamber,” IEEE Antennas Wireless Propag. Lett., vol. 12, pp. 886-889, July 2013.

A. Sorrentino, G. Ferrara, and M. Migliaccio, “The reverberating chamber as a line-of-sight wireless channel emulator,” IEEE Trans. Antennas Propag., vol. 56, pp. 1825-1830, June 2008.

Y. Cui, H. G. Wei, S. Wang, and L. Fan, “Efficient method of optimizing reverberation chamber using FDTD and genetic algorithm method,” Applied Computational Electromagnetics Society Journal, vol. 28, no. 4, pp. 293-299, Apr. 2013.

J. M. Ladbury, “Monte Carlo simulation of reverberation chambers,” Gateway to the New Millennium. 18th Digital Avionics Systems Conference. Proceedings (Cat. No.99CH37033), pp. 10.C.1-10. C.1, Oct. 1999.

S. Wang, Z. Wu, L. Du, G. Wei, and Y. Cui, “Study on the matrix pencil method with application to predict time-domain response of a reverberation chamber,” Applied Computational Electromagnetics Society Journal, vol. 28, no. 9, pp. 763-771, Sep. 2013.

D. Mandaris, R. Vogt-Ardatjew, E. Suthau, and F. Leferink, “Simultaneous multi-probe measurements for rapid evaluation of reverberation chambers,” 2018 IEEE Intern. Symposium on Electromagn. Compat. and 2018 IEEE Asia-Pacific Symposium on Electromagn. Compat (EMC/APEMC), pp. 590- 594, May 2018.

D. Mandaris, R. Vogt-Ardatjew, M. Zaher Mahfouz, E. Suthau, and F. Leferink, “Time efficient reverberation chamber performance analysis using simultaneous multiprobe measurement technique,” Intern. Symposium on Electromagn. Compat. (EMC EUROPE), pp. 1-5, Aug. 2018.

L. Anchidin, F. Bari, R. D. Tamas, L. Pometcu, and A. Sharaiha, “Near-field gain measurements: Single-probe distance averaging in a multipath site versus multi-probe field scanning inside an anechoic chamber,” 2017 General Assembly and Scientific Symposium of the International Union of Radio Science (URSI GASS), pp. 1-3, Aug. 2017.

J. Andersson and Z. Ying, “Analysis of different sampling methods in a reverberation chamber,” 2006 First Eur. Conf. Antennas Propag. (EUCAP), pp. 1-5, Nov. 2006.

C. L. Holloway, D. A. Hill, J. M. Ladbury, P. F. Wilson, G. Koepke, and J. Coder, “On the use of reverberation chambers to simulate a rician radio environment for the testing of wireless devices,” IEEE Trans. Antennas Propag., vol. 228, pp. 3167- 3177, Nov. 2006.

Q. Xu, W. Qi, C. Liu, L. Xing, D. Yan, Y. Zhao, T. Jia and Y. Huang, “Measuring the total radiated power of wideband signals in a reverberation chamber,” IEEE Antennas Wireless Propag. Lett., vol. 19, pp. 2260-2264, Oct. 2020.

##submission.downloads##

已出版

2021-11-06

栏目

General Submission