Wearable Panda-Shaped Textile Antenna with Annular Ring-Defected Ground Structure for Wireless Body Area Networks

作者

  • T. Annalakshmi Department of Electronics and Communication Engineering New Prince Shri Bhavani College of Engineering and Technology, Chennai 600074, Tamil Nadu, India https://orcid.org/0000-0002-6707-5459
  • S. Ramesh Department of Electronics and Communication Engineering SRM Valliammai Engineering College, Kattankulathur, Chennai 603203, Tamil Nadu, India https://orcid.org/0000-0002-2946-5296

##plugins.pubIds.doi.readerDisplayName##:

https://doi.org/10.13052/2022.ACES.J.370504

关键词:

Annular ring DGS, bending analysis, flexible, SAR, slot

摘要

This research presents a compact panda-shaped wearable antenna with a defected ground structure (DGS). It is fabricated using a flexible material to work at 2.4-GHz industrial scientific medical (ISM) band, confirming the wireless body area network (WBAN) application requirements. The annular ring DGS and circular and elliptical slots in the patch aid in achieving the operating frequency. Good impedance bandwidth is maintained during on-body and bending analysis. Furthermore, this antenna exhibits a peak gain of 7.3 dB and a minimum specific absorption rate (SAR) of 0.0233 W/kg for 1 g tissue and 1.02 W/kg for 10 g tissue. The investigation shows that an antenna with good robustness, compact, high flexibility, and very low SAR makes it a strong candidate for WBAN applications.

##plugins.generic.usageStats.downloads##

##plugins.generic.usageStats.noStats##

##submission.authorBiographies##

##submission.authorWithAffiliation##

T. Annalakshmi received the B.Tech. degree in electronics and communication engineering from Pondicherry University in 2002 and the M.E. degree in communication systems from Anna University in 2011, and is currently working toward the Ph.D. degree with the Department of Electronics and Communication Engineering, SRM Valliammai Engineering College, Chennai, India. Her research interest includes antennas and propagation and wireless communications. She is currently working as an Associate Professor with the

Department of Electronics and Communication Engineering, New Prince Shri Bhavani College of Engineering and Technology, Chennai, India, with 15 years of experience. She is a lifetime member of ISTEand ISRD.

##submission.authorWithAffiliation##

S. Ramesh received the B.E. degree in electronics and communication engineering from the University of Madras, Chennai, India, the M.Tech. degree in communication engineering from VIT University, Vellore, India, and the Ph.D. degree from SRM University, Chennai, India, in 2001, 2004, and 2015, respectively. He is currently working as an Associate Professor with the Department of Electronics and Communication Engineering, SRM Valliammai Engineering College, Chennai, India, with experience of 19.3 years. He is a senior member (S’10-M’17-SM’18) of IEEE Antennas & Propagation Society and Life member in IETE, ISTE, SEMCE, and BES. He authored papers in reputed journals and international/national conferences. His area of research interest includes antennas & propagation and wireless communications. He is guiding research scholars in the field of antennas and RF filter under Anna University, Chennai, India. He is associated with IEEE AP-S Madras chapter as a member in executive committee during 2018–2019 and IEEE MTT-S Madras Chapter for the year 2017.

参考

A. G. Al-Sehemi, A. A. Al-Ghamdi, N. T. Dishovsky, N. T. Atanasov, and G. L. Atanasova, et al., “Flexible and small wearable antenna for wireless body area network applications,” Journal of Electromagnetic Waves and Applications, vol. 31, no. 11-12, pp. 1063-1082, 2017.

A. Kashkool, S. Yahya, H. Al-Rizzo, A. Al-Wahhamy, and A. A. Issac, “On the design and simulation of antennas on ultra-thin flexible substrates,” Applied Computational Electromagnetics Society (ACES) Journal, vol. 33, no. 7, Jul. 2018.

A. Gupta and V. Kumar, “DGS-based wideband MIMO antenna for on–off-body communication with port isolation enhancement operating at 2.45GHz industrial scientific and medical band,” Journal of Electromagnetic Waves and Applications, vol. 35. no. 7, pp. 888-901, 2020.

H. Yalduz, T. E. Tabaru, V. T. Kilic, and M. Turkmen, “Design and analysis of low profile and low SAR full-textile UWB wearable antenna with metamaterial for WBAN applications,” AEU¨

International Journal of Electronics and Communications, vol. 126, pp. 1-12, Sep. 2020.

A. Y. I. Ashyap, S. H. Bin Dahlan, Z. Z. Abidin, and M. H. Dahri, et al., “Robust and efficient integrated antenna with EBG-DGS enabled wide bandwidth for wearable medical device applications,” IEEE Access, vol. 8, pp. 56346-56358, 2020.

H. F. Abutarboush, W. Li, and A. Shamim, “Flexible-screen-printed antenna with enhanced bandwidth by employing defected ground structure,” IEEE Antennas and Wireless Propagation Letters, vol. 19, no. 10, pp. 1803-1807, Oct.2020.

C. Kumar and D. Guha, “Asymmetric and compact DGS configuration for circular patch with improved radiations,” IEEE Antennas and Wireless Propagation Letters, vol. 19, no. 2, pp. 355-357, Feb. 2020.

S. Bhattacharjee, S. Maity, S. R. B. Chaudhuri, and M. Mitra, “A compact dual-band dual-polarized omnidirectional antenna for on-body applications,” IEEE Transactions on Antennas and Propagation, vol. 67, no. 8, pp. 5044-5053, Aug. 2019.

C. Wang, L. Zhang, and X. Wu, “A wearable flexible microstrip antenna based on the floating-ground backplane,” International Journal of RF and Microwave Computer-Aided Engineering, vol. 31, no. 1, pp. 1-15, Nov. 2020.

A. Arif, M. Zubair, M. Ali, M. U. Khan, and M. Q. Mehmood, “A compact, low-profile fractal antenna for wearable on-body WBAN applications,” IEEE Antennas and Wireless Propagation Letters, vol. 18, no. 5, pp. 981-985, May 2019.

H. Zu, B. Wu, P. Yang, W. Li, and J. Liu, “Wideband and high-gain wearable antenna array with specific absorption rate suppression,” Electronics, vol. 10, no. 17, pp. 2056, Aug. 2021.

M. Boyuan, J. Pan, E. Wang, and D. Yang, “Wristwatch-style wearable dielectric resonator antennas for applications on limps,” IEEE Access, vol. 8, pp. 59837-59844, 2020.

P. Mythili and A. Das, “Simple approach to determine resonant frequencies of microstrip antennas,” Antennas Propag. IEE Proc. -Microw. vol. 145, no. 2, pp. 159-162, Apr. 1998.

J. V. Jose, A. S. Rekh, and M. J. Jose, “Design techniques for elliptical micro-strip patch antenna and their effects on antenna performance,” International Journal of Innovative Technology and Exploring Engineering, vol. 8, no. 12, pp. 2317-2326, Oct. 2019.

S. Murugan, B. Rohini, P. Muthumari, and M. Padma Priya, “Multi-frequency T-slot loaded elliptical patch antenna for wireless applications,” Applied Computational Electromagnetics Society (ACES) Journal, vol. 1, no. 7, pp. 212-215, Jul. 2016.

A. Agrawal, D. Vakula, and N. V. S. N. Sarma, “Design of elliptical microstrip patch antenna using ANN,” PIERS Proceedings, Suzhou, China, pp. 264-268, 2011.

S. R. Patre and P. Surya Singh, “CPW-fed flower-shaped patch antenna for broadband applications,” Microwave and Optical Technology Letters, vol. 57, no. 12, pp. 2908-2913, 2015.

P. Seyed, “Bandwidth enhancement techniques,” Trends in Research on Microstrip Antennas, edited by Sudipta Chattopadhyay. London: IntechOpen, 2017. DOI: 10.5772/intechopen.70173.

A. Yadav, V. K. Singh, and H. Mohan, “Design of a U-shaped circularly polarized wearable antenna with DGS on a fabric substrate for WLAN and C-band applications,” Journal of Computational Electronics, vol. 18, pp. 1103-1109, May 2019.

M. Haran, G. Dilip Kumar, A. Ferris Garvin, and S. Ramesh, “Hexagonal microstrip patch antenna for early stage skin cancer identification,” International Journal of Telecommunications and Radio Engineering, vol. 79, no. 7, pp. 555-566, Jun. 2020.

B. B. Q. Elias, P. J. Soh, A. A. Al-Hadi, P. Akkaraekthalin, and G. A. E. Vandenbosch, “Bandwidth optimization of a textile PIFA with DGS using characteristic mode analysis,” Sensors, vol. 21, no. 7, pp. 2516, Apr. 2021.

T. Annalakshmi and S. Ramesh, “Performance and analysis of UWB aesthetic pattern textile antenna for WBAN applications,” Applied Computational Electromagnetics Society (ACES) Journal, vol. 35, no. 12, pp. 1525-1531, Dec. 2020.

D. Ram Sandeep, N. Prabakaran, T. P. Madhav Boddapati, and K. L. Narayana, “Circularly polarized jute textile antenna for Wi-MAX, WLAN and ISM band sensing applications,” Applied Computational Electromagnetics Society (ACES) Journal, vol. 35, no. 12, pp. 1493-1499, Dec. 2020.

A. Anbalagan, E. F. Sundarsingh, and V. S. Ramalingam, “Design and experimental evaluation of a novel on-body textile antenna for unicast applications,” Microwave and Optical Technology Letters, vol. 62, pp. 789-799, 2020.

F. S. Esther, M. Kanagasabai, and G. N. M. Alsath, “An investigation of a wearable antenna using human body modeling,” Applied Computational Electromagnetics Society (ACES) Journal, vol. 29, no. 10, pp. 777-783, 2014.

V. Karthik and T. R. Rao, “Performance investigations of a quad-band microstrip antenna for body wearable wireless devices,” Applied Computational Electromagnetics Society (ACES) Journal, vol. 36, no. 08, pp. 980-988, Oct. 2021.

N. RajeshKumar, P. D. Sathya, S. K. A. Rahim, and A. A. Eteng, “Reduced cross-polarization patch antenna with optimized impedance matching using a complimentary split ring resonator and slots as defected ground structure,” Applied Computational Electromagnetics Society (ACES) Journal, vol. 36, no. 6, pp. 718-725, Nov.2021.

S. Varma, S. Sharma, M. John, R. Bharadwaj, A. Dhawan, and S. K. Koul, “Design and performance analysis of compact wearable textile antennas for IoT and body-centric communication applications,” International Journal of Antennas and Propagation, vol. 2021, Article ID 7698765, p. 12, 2021.

S. Singh and S. Verma, “SAR reduction and gain enhancement of compact wideband stub loaded monopole antenna backed with electromagnetic band gap array,” International Journal of RF and Microwave Computer-Aided Engineering, vol. 31, no. 10, pp. 1-11, Jul. 2021.

S. Ahmad, A. Ghaffar, N. Hussain, and N. Kim, “Compact dual-band antenna with paired L-shape slots for on- and off-body wireless communication,” Sensors, vol. 21, no. 23, pp. 7953, Nov. 2021.

G. Gao, B. Hu, S. Wang, and C. Yang, “Wearable circular ring slot antenna with EBG structure for wireless body area network,” IEEE Antennas and Wireless Propagation Letters, vol. 17, no. 3, pp. 434-437, Mar. 2018.

I. Gil and R. Fernandez Garcia, “Wearable PIFA antenna implemented on jean substrate for wireless body area network,” Journal of Electromagnetic Waves and Applications, vol. 31, no. 11-12, pp. 1194-1204, Jul. 2017.

##submission.downloads##

已出版

2022-05-31

##submission.howToCite##

[1]
T. . Annalakshmi 和 S. . Ramesh, 《Wearable Panda-Shaped Textile Antenna with Annular Ring-Defected Ground Structure for Wireless Body Area Networks》, ACES Journal, 卷 37, 期 05, 页 546–553, 5月 2022.

期

2022: Vol 37 Iss 5

栏目

General Submission

##category.category##