Low-profile Normal-Mode Helical Antenna for Use in Proximity to Metal

作者

  • Wongook Hong Department of Electrical and Electronic Engineering National Defense Academy 1-10-20 Hashirimizu, Yokosuka-shi, 239-8686 JAPAN
  • Naobumi Michishita Department of Electrical and Electronic Engineering National Defense Academy 1-10-20 Hashirimizu, Yokosuka-shi, 239-8686 JAPAN
  • Yoshihide Yamada Department of Electrical and Electronic Engineering National Defense Academy 1-10-20 Hashirimizu, Yokosuka-shi, 239-8686 JAPAN

关键词:

Low-profile Normal-Mode Helical Antenna for Use in Proximity to Metal

摘要

To expand the applicability of UHF tags, a low-profile, small, normal-mode helical antenna (NMHA) that can be used on metallic plates was developed. This paper clarifies the design method for antenna structures for use in proximity to metal. The design data were obtained with the electromagnetic simulator FEKO. Fundamental electrical characteristics such as the antenna input impedances, self-resonance conditions, and radiation characteristics were clarified in proximity to metal. For antenna sizes of 0.03–0.05 wavelengths, antenna gains of about –0.5 dBd were achieved. The calculated results were verified using an actual antenna (size, 0.04 wavelengths). A tap feed structure was used for impedance matching. It was shown that very precise design results could be achieved. Moreover, the developed NMHA was designed to be a tag antenna. Here, the antenna impedance was matched to the IC chip impedance. The read range of the developed tag was measured to be about 15 m.

##plugins.generic.usageStats.downloads##

##plugins.generic.usageStats.noStats##

参考

RFID-related presentations, Special

sessions at IEEE AP-S International

Symposium, Honolulu, HI, June 2007.

H.W. Son, G.. Y. Choi, and C. S. Pyo,

“Open-Ended Two Strip Meander-Line

Antenna for RFID Tags,” ETRI Journal, vol.

, no. 3, pp. 383-385, June 2006.

L. Ukkonen, M.Schaffrath, L. Sydanheimo

and M. Kivikoski,” Analysis of integrated

slot-type tag antenna for passive UHF

RFID”, IEEE AP-S International

Symposium, pp. 1343-1346, July 2006.

M. L. Ng, et al, “Design and

Miniaturization of an RFID Tag Using a

Simple Rectangular Patch Antenna for

Metallic Object Identification,” IEEE AP-S

International Symposium, pp. 1741-1744,

June 2007.

X. Zeng, et al, “Slots in Metallic Label as

RFID Tag Antenna,” IEEE AP-S

International Symposium, pp. 1749-1752,

June 2007.

W. G. Hong, W. H. Jung, Y. Yamada and N.

Michishita, “High Performance Normal

Mode Helical Antenna for RFID Tags,”

IEEE AP-S International Symposium, pp.

-6026, June 2007.

www.feko.info

C. A. Balanis, “Antenna Theory Analysis

and Design, Second Edition”, John Wiley &

Sons Inc., Ch. 9, pp. 472-480, 1997.

W. G. Hong, Y. Yamada and N. Michishita,

“Design of a simple tap structure for low

profile small normal mode helical antenna,”

IEEE AP-S International Symposium, no.

, vol. 5, July 2008

##submission.downloads##

已出版

2022-06-17

栏目

General Submission