Survey of Laboratory Scale Fabrication Techniques for Passive UHF RFID Tags
关键词:
Survey of Laboratory Scale Fabrication Techniques for Passive UHF RFID Tags摘要
This paper presents an overview of various RFID tag fabrication methods and briefly describes the advantages and disadvantages of each method. The purpose of this paper is to provide the reader with the fabrication techniques that can be applied for RFID fabrication purposes for laboratory scale experiments. This paper will present the performance results of laboratory made RFID tags based on two fabrication methods (etching and screen printing) on multiple substrates (paper, thin transparent film, polyethylene terephthalate (PET), and fabrics). These results will prove the effectiveness of the presented methods for RFID tag fabrication purposes.
##plugins.generic.usageStats.downloads##
参考
K. V. S. Rao, P. V. Nikitin, and S. F. Lam,
“Antenna Design for UHF RFID Tags: A
Review and a Practical Application”, IEEE
Transaction on Antennas and Propagation,
vol. 53, no. 12, Dec. 2005.
“Wet Etching,” http://www.silicon
fareast.com/wetetch.htm.
“Dry Etching,” http://www.silicon
fareast.com/dryetch.htm.
A. G. Andreou and J. Wang, “Wet Etching,”
Advanced Topics in Fabrication and
Microengineering.
E. Chen, Wet and Dry Etching, 2004
“(WO/1990/013443) Etchant Solution for
Photoresistant-Patterned Metal Layer,”
http://www.wipo.int/pctdb/en/wo.jsp?IA=U
S1989005264&DISPLAY=DESC.
“Screenprinting RF Antennae: The green,
stable and low-cost solution,” OnBoard
Technology, pp. 22, October 2004.
T. L. Landers, D. B. Brown, E.W. Fant, E.
M. Malstrom, and N. M. Schmitt,
Electronics Manufacturing Processes,
Prentice Hall, 1994.
J. Costenoble, “Rotary screen printing: the
productive solution for HF/UHF RFID
labels,” SGIA Journal, pp. 7-10, 2005
S. B. Hoff, Screen Printing: A
Contemporary Approach, Delmar
Publishers, 2006
S. Merilampi, L. Ukkonen, L. Sydanheimo,
P. Ruuskanen, and M. Kivikoski, “Analysis
of Silver Ink Bow-Tie RFID Tag Antennas
Printed on Paper Substrates,” International
ELSHERBENI, ELMAHGOUB, SYDÄNHEIMO, UKKONEN, ELSHERBENI, YANG: LABORATORY FABRICATION FOR UHF RFID TAGS
Journal of Antennas and Propagation, vol.
, Article ID 90762, 9 pages, 2007.
S. Ludmerer, Parelec Inc., “Conductive Inks
for RFID Antenna,” RFID Journal Live,
http://www.rfidjournal.net/live05/Packaging
/Room_colo_245pm_ludmerer.pdf
A. Blayo and B. Pineaux, “Printing
processes and their potential for RFID
printing,” Proceedings of the 2005 Joint
Conference on Smart Objects and Ambient
Intelligence: Innovative Context-Aware
Services: Usages and Technologies, pp. 27-
, October 2005.
W. Zoomer, “Printing Technologies Make
Their Mark in Radio Frequency
Identification,” Screenweb, 2006.
R. H. Leach, and R. J. Pierce, ed., The
Printing Ink Manual, 5th edition, Van
Nostrand Reinhold International, 1993.
Voyantic TagformanceTM Lite,
H. T. Friis, “A note on a simple transmission
formula,” Proc. IRE, vol. 34, no. 5, pp. 254–
, May 1946.
C. Loo, K. Elmahgoub, F. Yang, A.
Elsherbeni, D. Kajfez, A. Kishk, T.
Elsherbeni, L. Ukkonen, L. Sydänheimo,
M. Kivikoski, S. Merilampi, and P.
Ruuskanen, “Chip Impedance Matching for
UHF RFID Tag Antenna Desgin”, Progress
In Electromagnetics Research (PIER 81),
pp. 359–370, 2008.
K. ElMahgoub, T. Elsherbeni, F. Yang, A.
Elsherbeni, L. Sydänheimo, and L.
Ukkonen, “Logo-Antenna Based RFID Tags
for Advertising Application”, 25th Annual
Review of Progress in Applied
Computational Electromagnetics, pp. 801-
, March 2009.
