Stable Partial Inductance Calculation for Partial Element Equivalent Circuit Modeling
关键词:
Stable Partial Inductance Calculation for Partial Element Equivalent Circuit Modeling摘要
Accurate and stable analytical solutions for partial element calculation in partial element equivalent circuit (PEEC) modeling are desirable due to fast and simple usage. Conventional analytical formulae based on integral Neumann formula may give miscalculations when we compute the partial inductance of three-dimensional structures with large spacing. In this paper, a novel model-order reduction (MOR) method is presented for mutual inductance calculation in order to improve its accuracy and stability. Mutual inductances of higher order models are represented by relatively lower order models. The criteria for MOR are revealed and a code implementation routine is described. The numerical accuracy, stability and calculation cost are investigated comparing with conventional procedures. Numerical experiments show that the MOR method can guarantee numerical stability and reduce calculation complexity simultaneously, and it has advantages to be implemented in PEEC modeling for large complex electronic systems.
##plugins.generic.usageStats.downloads##
参考
A. E. Ruehli, "Equivalent circuit models for three
dimensional multiconductor systems," IEEE
Trans. on Microwave Theory and Tech., vol. 22,
A. E. Ruehli and A. C. Cangrllaris, "Progress in
the methodologies for the electrical modeling,"
Proceedings of IEEE, vol. 89, pp. 740-771,
G. Antonini, "The partial element equivalent
circuit method for EMI, EMC and SI analysis,"
ACES Newsletter, vol. 21, pp. 8-32, 2006.
G. Antonini, G. Miscione, and J. Ekman, "PEEC
modeling of automotive electromagnetic
problems," ACES Newsletter, vol. 23, pp. 39-50,
G. Antonini, "Fast multipole formulation for
PEEC frequency domain modeling," ACES
Newsletter, vol. 17, 2002.
SONG, DUVAL, SU, LOUIS: STABLE PARTIAL INDUCTANCE CALCULATION FOR CIRCUIT MODELING
J. Ekman, G. Antonini, and A. E. Ruehli, "Impact
of partial element accuracy on PEEC model
stability," IEEE Trans. on Electromagnetic
Compatibility, vol. 48, pp. 19-32, 2006.
S. V. Kochetov and G. Wollenberg, "Stability of
full-wave PEEC models: reason for instabilities
and approach for correction," IEEE Trans. on
Electromagnetic Compatibility, vol. 47, pp. 738-
, 2005.
S. V. Kochetov and G. Wollenberg, "Stable and
effective full-wave PEEC models by
full-spectrum convolution macromodeling," IEEE
Trans. on Electromagnetic Compatibility, vol. 49,
pp. 25 - 34, 2007.
G. Antonini and P. Pepe, "Input-to-state stability
analysis of partial-element equivalent-circuit
models," IEEE Trans. on Circuits and Systems I:
Regular Papers, vol. 56, pp. 673 - 684, 2009.
Q. Ha, D. Yue, and X. Ma, "Stability analysis for
a partial element equivalent circuit (PEEC) model
of neutral type," Proceedings of the 2004 IEEE
International Conference on Control Applications,
, pp. 153 - 158.
A. E. Ruehli, U. Miekkala, and H. Heeb,
"Stability of discretized partial element equivalent
EFIE circuit models," IEEE Trans. on Antennas
and Propagation, vol. 43, pp. 553 - 559, 1995.
X. Zhang and Q. Han, "A new stability criterion
for a partial element equivalent circuit model of
neutral type," IEEE Trans. on Circuits and
Systems II: Express Briefs, vol. 56, pp. 798 - 802,
J. E. Garrett, A. E. Ruehli, and C. R. Paul,
"Accuracy and stability improvements of integral
equation models using the partial element
equivalent circuit (PEEC) approach," IEEE Trans.
on Antennas and Propagation, vol. 46, pp. 1824 -
, 1998.
F. Grover, Inductance Calculations: Working
Formulas and Tables. New York: Dover, 1962.
A. E. Ruehli, "Inductance calculations in a
complex integrated circuit environment," IBM J.
Res. Develop., vol. 16, pp. 470-481, 1972.
R. Wu, C. Kuo, and K. K. Chang, "Inductance and
resistance computations for three-dimensional
multiconductor interconnect structures," IEEE
Trans. on Microwave Theory and Techniques, vol.
, pp. 263–270, 1992.
C. Hoer and C. Love, "Exact inductance equations
for rectangular conductors with applications to
more complicated geometries," Journal of
Research of the National Bureau of Standards,
vol. 69C, pp. 127-137, 1965.
G. Zhong and C. Koh, "Exact closed-form
formula for partial mutual inductances of
rectangular conductors," IEEE Trans. on Circuits
and Systems I: Fundamental Theory and
Applications, vol. 50, pp. 1349 - 1352, 2003.
F. Freschi and M. Repetto, "A general framework
for mixed structured/unstructured PEEC
modelling," ACES Journal, vol. 23, pp. 200 - 206,
J. D. Jackson, Classical Electrodynamics, 3rd
Edition. New York: John Wiley & Sons, 1998.
M. Kamon, M. J. Tsuk, and J. K. White,
"FASTHENRY: A multipole-accelerated 3-D
inductance extraction program," IEEE Trans. on
Microwave Theory and Techniques, vol. 42, pp.
-1758, 1994.
"Standard for validation of computational
electromagnetics computer modeling and
simulation," IEEE Standard P1597, 2008.
A. P. Duffy, A. J. M. Martin, A. Orlandi, G.
Antonini, T. M. Benson, and M. S. Woolfson,
"Feature Selective Validation (FSV) for validation
of computational electromagnetics (CEM). Part I
-The FSV method," IEEE Trans. on Electromagn.
Compatibility, vol. 48, pp. 449 -459, 2006.
A. Orlandi, A. P. Duffy, B. Archambeault, G.
Antonini, D. E. Coleby, and S. Connor, "Feature
Selective Validation (FSV) for validation of
computational electromagnetics (CEM). Part II
–Assessment of FSV performance," IEEE Trans.
On Electromagn. Compatibility, vol. 48, pp. 460 -
, 2006.
C. R. Paul, Analysis of Multiconductor
Transmission Lines. New York: John Wiley &
Sons, 1994.
