Analysis and Design of a Planar Multilayered FSS with Arbitrary Incidence
关键词:
Analysis and Design of a Planar Multilayered FSS with Arbitrary Incidence摘要
A rigorous technique based on the transverse
Wave Concept Iterative Pro cedure (WCIP) and a Fast
Mode Transformation (FMT) is used to analyze the
Frequency Selective Surface (FSS). These structures are
used as filters and reflector antenna as well as deep-space
exploration for multi-frequency operations. In order to
initialize the iterative procedure, an incident wave is
defined in spatial domain with arbitrary angle of
incidence. The numerical complexity is studied and
compared to the classical MoM. The good agreement
between simulated and published data justifies the design
procedure.
##plugins.generic.usageStats.downloads##
参考
B. A. Munk, Frequency Selective Surfaces: Theory and
Design, Wiley, New York, 2000.
D. J. D. H. Werver, A. M onorchio, L. Lanuzza, and M. J.
Wilhelm, “The design synthesis of multi-band artificial
magnetic conductors using high impedance frequency
selective surfaces,” IEEE Trans. Antennas Propag., vol. 53,
no.1, pp. 8-17, Jan. 2005.
D. Hokim and J. Ick Choi, “D esign of a multi-band frequency
selective surface,” ETRI Journal, vol. 28 no. 4, Aug. 2006.
N. Bliznyuk and N. Engheta, “Numerical study of polarization
dependant focusing for a bi-layer planar FSS reflective at
millimeter wave length,” Microwave and Optical Technology
Letters, vol. 40, no. 5, pp. 361-365, Mar. 2004.
A. K. Bhattacharyya, “A numerical model for multilayered
microstrip phased-array antennas,” IEEE Trans. Antennas
Propag, vol. 44, no. 10, pp. 1386–1393, Oct. 1996.
M. Bozzi, L. Perregrini, J. Weinzierl, and C. Winnewisser,
“Efficient analysis of quasi-optical filters by a hybrid
MoM/BI-RME method,” IEEE Trans. Antennas Propag., vol.
, no. 7, pp. 1054–1064, Jul. 2001.
G. Zarrillo and K. Aguiar, “Closed-form low frequency
solutions for electromagnetic waves through a frequency
selective surfaces,” IEEE Trans. Antennas Propag., vol. 35,
pp. 1406–1417, Dec. 1987.
J. Jin and J. L. Volakis, “Electromagnetic scattering by a
perfectly conducting patch array on a dielectric slab,” IEEE
Trans. Antennas Propag., vol. 38, no. 4, pp. 556–563, 1990.
Zhi Liang Wang, Kozo Hashimoto, Naoki Shinohara, and
Hiroshi Matsumoto, “Frequency-Selective Surface for
Microwave Power Transmission,” IEEE Trans. MTT, vol. 47,
no.10, Oct. 1999.
R. J. Langley and E. A. Pa rker, “Equivalent circuit model for
arrays of square loops,” Electron. Letters, vol. 18, pp. 294–
, 1983.
N. Sboui, A. Gharsallah, A. Gharbi, and H. Baudrand,
“Analysis of double loop meander line by using iterative
process,” Microwave and Optical Technology Letters, vol. 26,
pp. 396-399, June 2000.
N. Sboui, A. Gharsallah, H. Baudrand, and A. Gharbi, “Design
and modeling of RF MEMS switch by reducing the number of
interfaces,” Microwave and Optical Technology Letters, vol.
, no. 5, pp. 1166-1170, May 2007.
N. Sboui, A. Gharsallah, A. Gharbi, and H. Baudrand, “Global
modeling of microwave active circuits by an efficient iterative
procedure,” IEE Proc. Microw. Antennas Propag. vol. 148,
no. 3, pp. 209-212, June 2001.
M. Azizi, M. Boussouis, H. Aubert, and H. Baudrand, “A
Three-dimensional Analysis of Planar Discontinuities by an
Iterative Method,” Microwave and Optical Technology
Letters, vol. 13, no. 6, pp. 372-376, Dec. 1996.
M. Tiataouine, A. G. Neto , H. Baudrand, and F. Djahli,
“Analysis of frequency selective surface on
isotropic/anisotropic layers using WCIP method,” ETRI
Journal, vol. 29, no. 1, Feb. 2007.
R. Mittra, H. Chan, and T. Cwik, “Techniques for analysis
frequency selective surfaces-A Review,” Proceeding of the
IEEE, vol. 76, no. 12, Dec. 1988.
E. Choinière and J. J. Laurin,“ Modeling of planar multilayer
periodic arrays using the method of lines,” ACES Journal, vol.
, no. 2, July 2002.
D. M. Pozar and D. H. Schaubert, “Analysis of an infinite
array of rectangular microstrip patches with idealized probe
feeds,” IEEE Trans. Antennas Propag., vol. 32, no. 10, pp.
–1107, Oct. 1981
