Design of a Retransmitted Chipless Tag based on Multi-state Resonators
##plugins.pubIds.doi.readerDisplayName##:
https://doi.org/10.13052/2023.ACES.J.380404关键词:
Chipless tag, encoding capacity, frequency sharing, radio frequency identification, resonator摘要
In order to increase the encoding capacity and reduce the size of the tag, this paper proposes the frequency sharing method to design a retransmitted chipless tag, which is composed of N resonators, a coupled microstrip transmission line, and the orthogonal transmitting antenna and receiving antenna. A pair of the same size resonators is placed symmetrically on both sides of the coupled microstrip transmission line. M open-ended stubs (OES) with different combinations are embedded in each resonator to obtain different resonance frequencies. The frequency sharing multi-state resonators’ chipless tags are designed where N=6, M=4, and the dimension of the tag is 46 mm × 30 mm, which can generate about 212 codes. Simulation and measurement results show good agreement and feasibility of the tag design. The chipless tag is small in size, has large encoding capacity and is easy to print. This kind of tag has no silicon chip so the cost is low. It can be widely used in logistics, supermarkets and other fields to replace the barcode.
##plugins.generic.usageStats.downloads##
参考
U. Kaiser and W. Steinhagen, “A low-power transponder IC for high−
performance identification systems,” IEEE Journal of Solid-State Circuits, vol. 30, no. 3, pp. 306-310, Mar. 1995.
S. Preradovic and N. C. Karmakar, “Chipless RFID: bar code of the future,” IEEE Microwave Magazine, vol. 11, no. 7, pp. 87-97, Dec. 2010.
S. Preradovic, I. Balbin, N. C. Karmakar, and G. F. Swiegers, “Multiresonator-based chipless RFID system for low-cost item tracking,” IEEE Transactions on Microwave Theory and Techniques, vol. 57, no. 5, pp. 1411-1419, May 2009.
C. Herrojo, J. Mata-Contreras, F. Paredes, A. Núñez, E. Ramon, and F. Martín, “Near-field chipless-RFID system with erasable/programmable 40-bit tags inkjet printed on paper substrates,” IEEE Microwave and Wireless Components Letters, vol. 28, no. 3, pp. 272-274, Mar. 2018.
A. Ali, S. I. Jafri, A. Habib, Y. Amin, and H. Tenhunen, “RFID humidity sensor tag for low-cost applications,” Applied Computational Electromagnetics Society (ACES) Journal, vol. 32, no. 12, pp. 1083-1088, May 2017.
A. Chamarti and K. Varahramyan, “Transmission delay line based ID generation circuit for RFID applications,” IEEE Microwave and Wireless Components Letters, vol. 16, no. 11, pp. 588-590, Nov. 2006.
A. Stelzer, S. Scheiblhofer, S. Schuster, and M. Brandl, “Multi reader/Multi-tag SAW RFID systems combining tagging, sensing, and ranging for industrial applications,” IEEE International Frequency Control Symposium, Honolulu, HI, USA, pp. 263-272, May 2008.
B. Shao, Q. Chen, Y. Amin, S. M. David, R. Liu, and L. Zheng, “An ultra-low-cost RFID tag with 1.67 Gbps data rate by ink-jet printing on paper substrate,” IEEE Asian Solid-State Circuits Conference, Beijing, China, pp. 1-4, Nov. 2010.
C. S. Hartmann, “A global SAW ID tag with large data capacity,” IEEE Ultrasonics Symposium, Munich, Germany, vol. 1, pp. 65-69, Oct. 2002.
J. Liu and J. Yao, “Wireless RF identification system based on SAW,” IEEE Transactions on Industrial Electronics, vol. 55, no. 2, pp. 958-961, Feb. 2008.
S. Haermae, V. P. Plessky, C. S. Hartmann, and W. Steichen, “Z-path SAW RFID tag,” IEEE Transactions on Ultrasonics Ferroelectrics and Frequency Control, vol. 55, no. 1, pp. 208-213, Jan. 2008.
V. P. Plessky and L. M. Reindl, “Review on SAW RFID tags,” IEEE Transactions on Ultrasonics Ferroelectrics and Frequency Control, vol. 57, no. 3, pp. 654-668, Mar. 2010.
M. Polivka, J. Havlicek, M. Svanda, and J. Machac, “Improvement in robustness and recognizability of RCS response of U-shaped strip-based chipless RFID tags,” IEEE Antennas and Wireless Propagation Letters, vol. 15, pp. 2000-2003, Apr.2016.
M. Svanda, M. Polivka, J. Havlicek, and J. Machac, “Chipless RFID tag with an improved magnitude and robustness of RCS response,” Microwave and Optical Technology Letters, vol. 59, no. 2, pp. 488-492, Feb. 2017.
M. Svanda, J. Havlicek, J. Machac, and J. Polivka, “Polarisation independent chipless RFID tag based on circular arrangement of dual-spiral capacitively-loaded dipoles with robust RCS response,” IET Microwaves Antennas and Propagation, vol. 12, no. 14, pp. 2167-2171, Nov. 2018.
N. Chen, Y. Shen, G. Dong, and S. Hu, “Compact scalable modeling of chipless RFID tag based on high-impedance surface,” IEEE Transactions on Electron Devices, vol. 66, no. 1, pp. 200-206, Jan. 2019.
G. Q. Dong, Y. Z. Shen, H. F. Meng, N. Chen, and W. B. Dou. “Printable chipless tag and dual-CP reader for internet of things,” Applied Computational Electromagnetics Society (ACES) Journal, vol. 33, no. 5, pp. 494-498, May 2018.
S. Preradovic and N. C. Karmakar, “Design of fully printable planar chipless RFID transponder with 35-bit data capacity,” European Microwave Conference (EuMC), Rome, Italy, pp. 13-16, 2009.
S. Preradovic, S. Roy and N. Karmakar, “Fully printable multi-bit chipless RFID transponder on flexible laminate,” Asia Pacific Microwave Conference, Singapore, pp. 2371-2374, Sep. 2009.
M. A. Ashraf, Y. A. Alshoudokhi, H. M. Behairy, M. R. Alshareef, S. A. Alshebeilim, K. Issa, and H. Fathallah, “Design and analysis of multi-resonators loaded broadband antipodal tapered slot antenna for chipless RFID applications,” IEEE Access, vol. 5, pp. 25798-25807, Oct. 2017.
Y. F. Weng, S. W. Cheung, T. I. Yuk, and L. Liu, “Design of chipless UWB RFID system using a CPW multi-resonator,” IEEE Antennas and Propagation Magazine, vol. 55, no. 1, pp. 13-31, Feb. 2013.
V. Sharma and M. Hashmi, “Chipless RFID tag based on open-loop resonator,” IEEE Asia Pacific Microwave Conference (APMC), Kuala Lumpur, Malaysia, pp. 543-546, Nov. 2017.
M. Sumi, C. M. Nijas, R. Dinesh, S. Mridula, and P. Mohanan, “Spectral signature-encoded chipless RFID tag with planar multiresonators,” Journal of Electromagnetic Waves and Applications, vol. 28, no. 18, pp. 2266-2275, Dec. 2014.
M. Sumi, R. Dinesh, C. M. Nijas, S. Mridula, and P. Mohanan, “High bit encoding chipless RFID tag using multiple E shaped microstrip resonators,” Progress in Electromagnetics Research B, vol. 61, no. 2014, pp. 185-196, Nov. 2014.
E. O. Hammerstad and O. Jensen, “Accurate models for microstrip computer-aided design,” International Microwave Symposium Digest IEEE, pp. 407-409, May 1980.
E. Q. Hammerstard, “Equations for microstrip circuit design.” IEEE European Microwave Conference, Hamburg, Germany, pp. 268-272, Sept. 1975.
J. X. Liang, C. C. Chiau, X. D. Chen, and C. G. Parini, “Study of a printed circular disc monopole antenna for UWB systems,” IEEE Transactions on Antennas and Propagation, vol. 53, no. 11, pp. 3500-3504, Nov. 2005.
