A Low-profile Dual-band Frequency Selective Surface with High Selectivity at its Higher Passband
##plugins.pubIds.doi.readerDisplayName##:
https://doi.org/10.13052/2024.ACES.J.390609关键词:
Complementary structure, dual-band, frequency selective surfaces, high selectivity, low-profile摘要
In order to meet the requirements for multiband communication, a dual-band passband frequency selective surface (FSS) with low-profile and high selectivity at its higher passband is proposed in this paper. The proposed FSS is a three-layer structure. An arc-cross patch (ACP) and four quarter-circular patches (QCP) are introduced on the outer layers to produce two transmission nulls of the higher passband, which result in high selectivity of higher passband. The inductively complementary structure on the middle layer is introduced to manipulate the coupling between layers which contribute to the low-profile and angular stability. The segmental study method is used to establish the equivalent circuit model (ECM) and analyze its mechanism. The proposed dual-band FSS, whose high selectivity was verified by experiment, is low-profile and shows good polarization insensitivity and angular stability. A feasible FSS design solution is provided for dual-band communication.
##plugins.generic.usageStats.downloads##
参考
P. Jha, A. Kumar, A. De, and R. K. Jain, “Super ultra-wideband planar antenna with parasitic notch and frequency selective surface for gain enhancement,” Applied Computational Electromagnetics Society (ACES) Journal, vol. 37, no. 7, pp. 757-764, Dec. 2022.
H. Ahmad, M. Rahman, S. Bashir, W. Zaman, and F. C. Seman, “Miniaturized frequency selective radome operating in the X-band with wideband absorption,” Applied Computational Electromagnetics Society (ACES) Journal, vol. 34, no. 12, pp. 1915-1921, Dec. 2019.
Ş. Balta and M. Kartal, “A novel double-layer low-profile multiband frequency selective surface for 4G mobile communication system,” Applied Computational Electromagnetics Society (ACES) Journal, vol. 37, no. 4, pp. 420-427, Apr. 2022.
M. Idrees, S. Buzdar, S. Khalid, and M. A. Khalid, “A miniaturized polarization independent frequency selective surface with stepped profile for shielding applications,” Applied Computational Electromagnetics Society (ACES) Journal, vol. 31, no. 5, pp. 531-536, Aug. 2021.
M. S. Samani, R. S. Shirazi, and G. Moradi, “Multi-band frequency selective surface design based on idea of clusters in cellular communication systems,” Applied Computational Electromagnetics Society (ACES) Journal, vol. 30, no. 10, pp. 1079-1082, Aug. 2021.
E. C. Braz and A. L. P. S. Campos, “A new multifractal geometry for design of frequency selective surfaces with dual band response,” Applied Computational Electromagnetics Society (ACES) Journal, vol. 30, no. 7, pp. 799-803, Aug. 2021.
Z. Yu, X. Yang, W. Tang, J. Zhu, and C. Wang, “Three-dimensional dual-band frequency selective surface with close band spacing,” in CSQRWC Conference, Taiyuan, China, pp. 1-3, 2019.
P. Jiang, W. Jiang, W. Hu, and S. Gong, “An interlaced grid dual-band dual-polarized bandpass FSS with a large band ratio,” IEEE Antennas Wireless Propag. Lett., vol. 21, no. 5, pp. 1027-1031, May 2022.
Y.-H. Ma, D.-W. Wang, Y. Yu, and W.-S. Zhao, “Design of dual-band frequency-selective surfaces with independent tunability,” IEEE Trans. Antennas Propag., vol. 70, no. 12, pp. 12381-12386, Dec. 2022.
A. Chatterjee, G. Ali Sarkar, and S. K. Parui, “A multi-layered frequency selective surface-based wireless filter with dual bandpass response,” in IEEE MTT-S Int. Microwave and RF Conference, Kolkata, India, pp. 1-4, 2018.
X. Zhang, W. Wu, J. Huang, W. Zhang, Y. Ye, and N. Yuan, “Dual-polarized frequency selective rasorber with two transmission bands,” IEEE Access, vol. 7, pp. 139795-139801, Sep. 2019.
B. Q. Hu, L. M. Zhan, C. Z. Chen, and W. G. Li, “Theoretical analysis and simulation of shape factor of bandpass filter,” Ship Electronic Engineering, vol. 39, no. 8, pp. 100-107, Aug. 2019.
F. Costa, A. Monorchio, and G. Manara, “An overview of equivalent circuit modeling techniques of frequency selective surfaces and metasurfaces,” Applied Computational Electromagnetics Society (ACES) Journal, vol. 29, no. 12, pp. 960-976, Aug. 2021.
D. Li, T. W. Li, R. Hao, H. S. Chen, W. Y. Yin, H. C. Yu, and E. P. Li, “A low-profile broadband bandpass frequency selective surface with two rapid band edges for 5G near-field applications,” IEEE Trans. Electromagnetic Compatibility, vol. 59, no. 2, pp. 670-676, Apr. 2017.
M. Hussein, J. Zhou, Y. Huang, and B. Al-Juboori, “A low-profile miniaturized second-order bandpass frequency selective surface,” IEEE Antennas Wireless Propag. Lett., vol. 16, pp. 2791-2794, Aug. 2017.
M. Al-Joumayly and N. Behdad, “A new technique for design of low-profile, second-order, bandpass frequency selective surfaces,” IEEE Trans. Antennas Propagat., vol. 57, no. 2, pp. 452-459, Feb. 2009.
