Design of 3-Bit Angle-insensitive RIS for 5G Communication Systems
##plugins.pubIds.doi.readerDisplayName##:
https://doi.org/10.13052/2024.ACES.J.400406关键词:
3-bit RIS, 5G, angular insensitivity, quantization, reconfigurable intelligent surface, split ring resonator, SRR, varactor摘要
This paper introduces a 3-bit reconfigurable intelligent surface (RIS) design characterized by its unique angle-insensitive properties for 5G communication systems. The proposed configuration provides eight distinct phase states enabled by the states of two varactors with an applied bias voltage. The design of the unit cell with double centric square split ring resonators and the formation of the RIS with a 5x5 array have been presented. A detailed analysis of the RIS performance has been conducted using the CST 3D electromagnetic simulator to study the reflection amplitude and phase responses. It is demonstrated that the results show a phase range of up to 315 degrees, along with eight distinct states exhibiting a stable interval of 45 degrees. This effectively covers incidence angles ranging from 0 to 60 degrees.
##plugins.generic.usageStats.downloads##
参考
Q. Ma, Y. Liu, Z. Zhang, X. Wang, J. Wang, and H. Li, “Smart metasurface with self-adaptively reprogrammable functions,” Light: Science & Applications, vol. 8, no. 1, Oct. 2019.
L. Zhang, X. Q. Chen, S. Liu, Q. Zhang, J. Zhao, and T. J. Cui, “Dynamically realizing arbitrary multi-bit programmable phases using a 2-bit time-domain coding metasurface,” IEEE Transactions on Antennas and Propagation, vol. 68, no. 4, pp. 2984-2992, Apr. 2020.
W. Tang, M. Z. Chen, X. Chen, J. Y. Dai, Y. Han, M. D. Renzo, Y. Zeng, S. Jin, Q. Cheng, and T. J. Cui, “Wireless communications with reconfigurable intelligent surface: Path loss modeling and experimental measurement,” IEEE Transactions on Wireless Communications, vol. 20, no. 1, pp. 421-439, Jan. 2021.
A. Eroglu, RF/Microwave Engineering and Applications in Energy Systems. Hoboken, NJ: Wiley, 2022.
S. Abeywickrama, R. Zhang, Q. Wu, and C. Yuen, “Intelligent reflecting-surface: Practical phase shift model and beamforming optimization,” IEEE Transactions on Communications, vol. 68, no. 9, pp. 5849-5863, Sep. 2020.
M. Di Renzo, A. Zappone, M. Debbah, M.-S. Alouini, C. Yuen, J. D. Rosny, and S. Tretyakov, “Smart radio environments empowered by reconfigurable intelligent surfaces: How it works, state of research, and the road ahead,” IEEE Journal on Selected Areas in Communications, vol. 38, no. 11, pp. 2450-2525, Nov. 2020.
T. S. Rappaport, Y. Xing, O. Kanhere, S. Ju, A. Madanayake, S. Mandal, A. Alkhateeb, and G. C. Trichopoulos, “Wireless communications and applications above 100 GHz: Opportunities and challenges for 6G and beyond,” IEEE Access, vol. 7, pp. 78729-78757, 2019.
L. Dai, B. Wang, M. Wang, X. Yang, J. Tan, S. Bi, and Z. Chen, “Reconfigurable intelligent surface-based wireless communications: Antenna design, prototyping, and experimental results,” IEEE Access, vol. 8, pp. 45913-45923, 2020.
S. R. Biswas, C. E. Gutierrez, A. Nemilentsau, I. H. Lee, S. H. Oh, P. Avouris, and T. Low, “Tunable graphene metasurface reflectarray for cloaking, illusion, and focusing,” Phys. Rev. Appl., vol. 9, no. 034021, 2018.
A. Araghi, M. Khalily, M. Safaei, A. Bagheri, V. Singh, F. Wang, and R. Tafazolli, “Reconfigurable intelligent surface (RIS) in the sub-6 GHz band: Design, implementation, and real-world demonstration,” IEEE Access, vol. 10, pp. 2646-2655, 2022.
A. Pitilakis, O. Tsilipakos, F. Liu, K. M. Kossifos, A. C. Tasolamprou, D. H. Kwon, M. S. Mirmoosa, and C. M. Soukoulis, “A multi-functional reconfigurable metasurface: Electromagnetic design accounting for fabrication aspects,” IEEE Trans. Antennas Propag., vol. 69, no. 3, pp. 1440-1454, 2021.
O. M. Bucci, G. Mazzarella, and G. Panariello, “Reconfigurable arrays by phase-only control,” IEEE Trans. Antennas Propag., vol. 39, no. 7, pp. 919-925, 1991.
