Research on the Influence of Train Speed Change on the EMI of Pantograph-Catenary Arc to Main Navigation Stations

作者

  • Yutao Tang School of Electrical Engineering Southwest Jiaotong University, Chengdu, 610031, China
  • Feng Zhu School of Electrical Engineering Southwest Jiaotong University, Chengdu, 610031, China
  • Yingying Chen School of Electrical Engineering Southwest Jiaotong University, Chengdu, 610031, China

关键词:

Airport navigation stations, electromagnetic interference, pantograph-catenary arc, speed of high-speed train

摘要

The electromagnetic interference (EMI) of the pantograph-catenary arc (PCA) to the main navigation stations will be affected when the speed of the high-speed train is changed. In order to study the influence of the speed change, we measured and analyzed the electric field intensity of the PCA generated at common and neutral section of power supply line at different train speeds. The frequency range in this study is the frequency of the main navigation stations (108 ~ 336 MHz). Both theoretical and experimental results show that PCA radiation increases with the increase of train speed. Besides, we calculated the maximum train speed without interfering the navigation signal. This work is useful for estimating EMI of the PCA at different train speeds and mitigating the interference to the navigation station near the highspeed railway by proposing corresponding speed limits.

##plugins.generic.usageStats.downloads##

##plugins.generic.usageStats.noStats##

##submission.authorBiographies##

##submission.authorWithAffiliation##

Yutao Tang was born in Sichuan Province, China, in 1991. She received the B.S. degree in Automation from Southwest Science and Technology University, Mianyang, China, in 2013, and is currently working toward the Ph.D. degree in Electrical Engineering at Southwest Jiaotong University, Chengdu, China. Her research interests include electromagnetic environment test and evaluation, and electromagnetic compatibility analysis and design.

##submission.authorWithAffiliation##

Feng Zhu was born in Anhui Province, China, in 1963. He received a B.S. degree in Physics from Huaibei Normal University, Huaibei, China, in 1984, an M.S. degree in Physics from Sichuan University, Chengdu, China, in 1987, and the Ph.D. degree in Electromagnetic Theory and Microwave Techniques from Southwest Jiaotong University, Chengdu, in 1997. He is currently a Professor in the Department of Electrical Engineering, Southwest Jiaotong University. His research interests include electromagnetic environment test and evaluation, electromagnetic compatibility, and numerical electromagnetic methods.

##submission.authorWithAffiliation##

Yingying Chen was born in Shanxi Province, China, in 1996. She received a B.S. degree in Electrical Engineering and Automation from Taiyuan University of Science and Technology in China, in 2018. She is currently pursuing a master's degree in Electrical Engineering at Southwest Jiaotong University, Chengdu, China. Her research interests include electromagnetic environment testing and evaluation, as well as electromagnetic compatibility analysis and design.

参考

X. Li, F. Zhu, H. Lu, R. Qiu, and Y. Tang, “Longitudinal propagation characteristic of pantograph arcing electromagnetic emission with high-speed train passing the articulated neutral section,” IEEE Trans. Electromagn. Compat., vol. 61, no. 2, pp. 319-326, June 2018.

H. Lu, F. Zhu, Q. Liu, X. Li, Y. Tang, and R. Qiu, “Suppression of cable overvoltage in a high-speed electric multiple units system,” IEEE Trans. Electromagn. Compat., vol. 61, no. 2, pp. 361- 371, June 2018.

Electromagnetic Environment Requirements for Aeronautical Radio Navigation Stations, GB/T 6364, 2013 (in Chinese).

W. Wei, T. Zhang, G. Gao, and G. Wu, “Influences of pantograph-catenary arc on electrical characteristics of a traction drive system,” High Voltage Eng., vol. 44, no. 5, pp. 1589-1597, May 2018. (In Chinese).

A. Dong, G. Wu, G. Gao, L. Zhou, and W. Wang, “Simulation system of pantograph arcing,” Electric Power Equipment-Switching Technology 2011 1st Int. Conf. on. IEEE, pp. 637-641, Oct. 2011.

Y. Wang, Z. Liu, X, Mu, K. Huang, and H. Wang, “An extended Habedank’s equation-based EMTP model of pantograph arcing considering pantograph-catenary interactions and train speeds,” IEEE Trans. on Power Del., vol. 31, no. 3, pp. 1186-1194, Jan. 2016.

E. Karadimou and R. Armstrong, “Test of rolling stock electromagnetic compatibility for crossdomain interoperability,” IET Intelligent Transport Systems, vol. 10, no. 1, pp. 10-16, Feb. 2016.

F. Zhu, Y. Tang, and C. Gao, “Mechanism and suppression of electromagnetic interference of pantograph-catenary arc to speed sensor of CRH380BL electric multiple unit,” China Railway Science, vol. 37, no. 6, pp. 69-74, Nov. 2016. (In Chinese).

Y. Tang and F. Zhu, “Measurement and suppression of electromagnetic interference to speed sensor of CRH380BL electric multiple unit,” 2017 International Applied Computational Electromagnetics Society Symposium, Sept. 2017.

Y. Tang, F. Zhu, H. Lu, and X. Li, “Analysis and suppression of EMI for traction control unit speed sensors of CRH380BL electric multiple unit,” Applied Computational Electromagnetics Society Journal, vol. 33, no. 5, pp. 553-560, May 2018.

X. Chen, B, Cao, Y. Liu, G. Gao, and G. Wu, “Dynamic model of pantograph-catenary arc of train in high speed airflow field,” High Voltage Eng., vol. 24, no. 11, pp. 3593-3600, Nov. 2016. (In Chinese).

X. Yan, W. Chen, and Z. Li, “Simulation for self-extinction behavior of secondary arc in transmission lines,” High Voltage Eng., vol. 38, no. 9, pp. 2150-2156, 2012. (In Chinese).

Y. Liu, G. Chang, and H. Huang, “Mayr’s equation-based model for pantograph arc of highspeed railway traction system,” IEEE Trans. on Power Del., vol. 25, no. 3, pp. 2025-2027, Aug. 2010.

H. Zhou, Z. Liu, Y, Cheng, and K. Huang, “Extended black-box model of pantograph arcing considering varying pantograph detachment distance,” 2017 IEEE Transportation Electrification Conference and Expo, Asia-Pacific (ITEC Asia-Pacific), Harbin, pp. 1-6, 2017.

Y. Wu, “Research on dynamic performance and active control strategy of high speed pantographcatenary systems,” Ph.D. dissertation, Dept. Elect. Eng., Beijing Jiaotong Univ., Beijing, China, 2011. (In Chinese).

S. Midya, D. Bormann, T. Schutte, and R. Thottappillil, “Pantograph arcing in electrified railways—Mechanism and influence of various parameters—Part II: With AC traction power supply,” IEEE Trans. on Power Del., vol. 24, no. 4, pp. 1940-1950, Sep. 2009.

S. Li, X. Jin, and H. Bi, “Numerical calculation on very fast transient overvoltage of UHV gas insulated substation by variable gap arc model,” High Voltage Eng., vol. 41, no. 4, pp. 1306-1312, 2015. (In Chinese).

Railway Applications-Electromagnetic CompatibilityPart 2: Emission of the Whole Railway System to the Outside World, IEC Standard 62236-2, 2018.

C. Zhang, X. Cai, and Z. Jiang, “Characteristics and measurement of interference sources in electrified railway,” Journal of Beijing Jiaotong Univ., no. 2, pp. 13-29, July 1980. (In Chinese).

J. Gou, F. Zhu, J. Zou, J. Ye, H. Li, and Y. Wang, “Research on EMI of instrument landing system on aircraft caused by pantograph arc,” Journal of the China Railway Society, vol. 40, no. 7, pp. 61- 66, July 2018. (In Chinese).

##submission.downloads##

已出版

2021-04-08

##submission.howToCite##

[1]
Yutao Tang, Feng Zhu, 和 Yingying Chen, 《Research on the Influence of Train Speed Change on the EMI of Pantograph-Catenary Arc to Main Navigation Stations》, ACES Journal, 卷 36, 期 4, 页 450–457, 4月 2021.

期

2021: Vol 36 Iss 4

栏目

General Submission