Design of Ultra Low Profile Inverted L Antenna Composed of CPW Printed on PET Sheet for IoT Application

作者

  • Mitsuo Taguchi Graduatae School of engineering Nagasaki University Nagasaki, Japan

关键词:

inverted L antenna, IoT, low profile antenna, printed antenna, polyethylene terephthalate sheet

摘要

The ultra low profile inverted L (ULPIL) antenna on a rectangular conducting plane is located above the lower conducting plane and numerically analyzed for the application of IoT. The coplanar waveguide (CPW) is inserted within the antenna element. The antenna element is printed on the polyethylene terephthalate (PET) sheet. The shift of the resonant frequency of this antenna is small due to the existence of lower conducting plane. The influence of the existence of the lower conducting plane can be neglected when the distance between the ULPIL antenna and the lower conducting plane is longer than 6 mm (0.049 wavelength). Therefore the ULPIL antenna may be promising for the IoT application.

##plugins.generic.usageStats.downloads##

##plugins.generic.usageStats.noStats##

参考

T. Yamashita and M. Taguchi, “Ultra Low Profile Inverted L Antenna on a Finite Conducting Plane”, Proc. of ISAP 2009, pp. 361-364, 2009.

K. Takata and M. Taguchi, “Offset Fed Inverted L Antenna with Planar Element,” Proc. of 2016 IEICE General Conference, B-1-53, Mar. 2016 (in Japanese).

M. Taguchi and K. Takata, “Offset Fed Planar Inverted L Antenna with Built-in Coplanar Waveguide,” Proc. of IEEE APS 2017, pp. 1773- 1774, July 2017.

M. Sumi and J. Takada, “Multiband Antennas Comprising Off-CenterFed Dipoles for M2M Applications,” Proc. of IEEE CAMA 2018, 36.2, Sept. 2018.

M. Taguchi, “Ultra Low Profile Inverted L Antenna Composed of CPW Printed on PET Sheet,” Proc. of IEEE APWC 2019, pp. 419-420, Sept. 2019.

M. Taguchi, “Ultra Low Profile Inverted L Antenna Composed of CPW Printed on PET sSeet for IoT Application,” Proc. of IEEE CAMA 2019, Oct. 2019.

http://www.wipl-d.com/

##submission.downloads##

已出版

2020-11-07

栏目

General Submission