Design of a Dielectric-loaded Wide Beam Quad-ridged Horn Antenna
关键词:
Dielectric loading, differential feed, quad-ridged horn, reflector antenna摘要
A quad-ridged horn antenna with dielectric loading covering the 0.6 GHz to 4 GHz band is proposed. Through the comprehensive design of differential feeding, a quad-ridged flare and loaded dielectrics, the feed antenna can be used to match a reflector with a large illumination angle of approximately 150 degrees. In the working band, the reflection coefficient is less than -8 dB, the isolation is larger than 40 dB, and its crosspolarization discrimination is larger than 31 dB for both polarizations. To verify the simulations, a prototype is fabricated and measured, and the measurements are in good agreement with the simulations. A reflector with a diameter of 33 meters and a focal diameter ratio of 0.33 is adopted to analyze the in-dish performance of the feed. The simulated results show that an average efficiency of 55.16% is realized and that the problem of the efficiency decrease caused by beamwidth narrowing at high frequencies is solved.
##plugins.generic.usageStats.downloads##
参考
D. R. DeBoer, et al., “Australian SKA pathfinder: A high-dynamic range wide-field of view survey telescope,” Proceedings of the IEEE, vol. 97, no. 8, pp. 1507-1521, July 2009.
A. Chippendale, et al., “Phased array feed testing for astronomy with ASKAP,” 2010 IEEE International Symposium on Phased Array Systems and Technology, Waltham, MA, USA, pp. 648- 652, Oct. 2010.
D. Li and Z. C. Pan, “The five-hundred-meter aperture spherical radio telescope project,” Radio Science, vol. 51, no. 7, pp. 1060-1064, Dec. 2016.
Y. Wu, K. F. Warnick, and C. J. Jin, “Design study of an L-band phased array feed for wide-field surveys and vibration compensation on FAST,” IEEE Transactions on Antennas and Propagation, vol. 61, no. 6, pp. 3026-3033, Mar. 2013.
D. R. DeBoer and D. C. J. Bock, “The Allen telescope array: Splitting the aperture,” IEEE Microwave Magazine, vol. 5, no. 2, pp. 46-53, June 2004.
J. Yang, et al., “Cryogenic 2–13 GHz eleven feed for reflector antennas in future wideband radio telescopes,” IEEE Transactions on Antennas and Propagation, vol. 59, no. 6, pp. 1918-1934, Mar. 2011.
J. Yang, et al., “A compact dual-polarized 4-port eleven feed with high sensitivity for reflectors over 0.35–1.05 GHz,” IEEE Transactions on Antennas and Propagation, vol. 63, no. 12, pp. 5955-5960, Oct. 2015.
A. Akgiray, et al., “Circular quadruple-ridged flared horn achieving near-constant beamwidth over multioctave bandwidth design and measurements,” IEEE Transactions on Antennas and Propagation, vol. 61, no. 3, pp. 1099-1108, Mar. 2013.
A. Dunning, et al., “An ultra-wideband dielectrically loaded quad-ridged feed horn for radio astronomy,” 2015 IEEE-APS Topical Conference on Antennas and Propagation in Wireless Communications (APWC), Turin, Italy, pp. 787-790, Oct. 2015.
W. HeB and B. Liesenkotter, “A dual mode horn feed for deep space telemetry reception by the Effelsberg radio telescope,” 1973 3rd European Microwave Conference, Brussels, Belgium, Sept. 1973.
J. Flygare, M. Pantaleev, and S. Olvhammar, “BRAND: Ultra-wideband feed development for the European VLBI network — A dielectrically loaded decade bandwidth quad-ridge flared horn,” 12th European Conference on Antennas and Propagation (EuCAP 2018), London, UK, Apr. 2018.
K. T. Selvan, et al., “Accurate design method for pyramidal horns of any desired gain and aperture phase error,” IEEE Antennas and Wireless Propagation Letters, vol. 7, pp. 31-32, Feb. 2008.
D. A. Monto, et al., “High-performance smoothwalled horn antennas for THz frequency range: Design and evaluation,” IEEE Transactions on Terahertz Science and Technology, vol. 9, no. 6, pp. 587-597, Sept. 2019.
S. S. Roy, et al., “Design of a compact multielement monopulse feed for ground-station satellite tracking applications,” IEEE Antennas and Wireless Propagation Letters, vol. 18, no. 9, pp. 1721-1725, July 2019.
S. Zhang, D. Cadman, and J. Y. C. Vardaxoglou, “Additively manufactured profiled conical horn antenna with dielectric loading,” IEEE Antennas and Wireless Propagation Letters, vol. 17, no. 11, pp. 2128-2132, Sept. 2018.
Q. Wu, et al., “A Ku-band dual polarization hybrid-mode horn antenna enabled by printedcircuit-board metasurfaces,” IEEE Transactions on Antennas and Propagation, vol. 61, no. 3, pp. 1089-1098, Nov. 2012.
G. B. Wu, et al., “High-gain circularly polarized lens antenna for terahertz applications,” IEEE Antennas and Wireless Propagation Letters, vol. 18, no. 5, pp. 921-925, Mar. 2019.
K. T. Liu, Y. H. Ge, and C. X. Lin, “A compact wideband high-gain metasurface-lens-corrected conical horn antenna,” IEEE Antennas and Wireless Propagation Letters, vol. 18, no. 3, pp. 457-461, Jan. 2019.
Y. Li, Z. Y. Zhang, and G. Fu, “A design of quadridged horn antenna with dielectric loading,” 2014 XXXIth URSI General Assembly and Scientific Symposium (URSI GASS), Beijing, China, Oct. 2014.
R. J. Bauerle, et al., “The use of a dielectric lens to improve the efficiency of a dual-polarized quadridge horn from 5 to 15 GHz,” IEEE Transactions on Antennas and Propagation, vol. 57, no. 6, pp. 1822-1825, June 2009.
J. Flygare and M. Pantaleev, “Dielectrically loaded quad-ridge flared horn for beamwidth control over decade bandwidth—optimization, manufacture, and measurement,” IEEE Transactions on Antennas and Propagation, vol. 68, no. 1, pp. 207-216, Sept. 2019.
T. S. Beukman, et al., “A quadraxial feed for ultrawide bandwidth quadruple-ridged flared horn antennas,” The 8th European Conference on Antennas and Propagation (EuCAP 2014), The Hague, Netherland, pp. 3312-3316, Sept. 2014.
Q. Xue, S. W. Liao, and J. H. Xu, “A differentiallydriven dual-polarized magneto-electric dipole antenna,” IEEE Transactions on Antennas and Propagation, vol. 61, no. 1, pp. 425-430, Jan. 2013.
C. W. Liu and C. C. Chen, “A UWB three-layer dielectric rod antenna with constant gain, pattern and phase center,” IEEE Transactions on Antennas and Propagation, vol. 60, no. 10, pp. 4500-4508, Oct. 2012.
G. L. James and B. MacA. Thomas, “Comparison of G/T between dual-reflector and primary-focus antennas,” Electronics Letters, vol. 16, no. 8, pp. 286-288, Apr. 1980.
J. L. Volakis, Antenna Engineering Handbook, 4nd ed., McGraw-Hill, New York, 2007.
W. M. Sun and C. A. Balanis, “Analysis and design of quadruple-ridged waveguides,” IEEE Transactions on Antennas and Propagation, vol. 42, no. 12, pp. 2201-2207, Dec. 1994.
N. Marcuvitz, Waveguide Handbook, ser. MIT Radiation Laboratory. Lexington, MA: Boston Technical, 1964.
B. Jacobs, J. W. Odendaal, and J. Joubert, “An improved design for a 1–18 GHz double-ridged guide horn antenna,” IEEE Transactions on Antennas and Propagation, vol. 60, no. 9, pp. 4110-4118, July 2012.
