Research on Topology of Axial Flux Permanent Magnet Synchronous Generator
关键词:
Efficiency, finite element analysis, TORUS topology, vertical axis wind turbines摘要
Through the comparative study of the TORUSNN and TORUS-NS topologies for the axial flux permanent magnet synchronous generator (AFPMSG), it is shown that the AFG with single stator double rotors topology is suitable for vertical axis wind turbines (VAWT). The basic parameters are designed and their 3D finite element models are established for the two topologies, which are compared and analyzed respectively on the same amount of magnets and windings, the magnetic density, THD value, torque ripple and efficiency. The research shows that the efficiency of TORUS-NN structure is only 0.22% higher than that of TORUS-NS structure with the same amount of magnetic steel, but the torque ripple of TORUS-NN structure is much greater than that of TORUS-NS structure, when the amount of magnet steel and the winding are the same, the efficiency of TORUS-NS structure is 8.5% higher than TORUS-NN structure. Considering their performance and economy, the TORUS-NS structure is superior to TORUS-NN topology structure for VAWT in starting torque and low wind speed. The experimental results and finite element analysis results are within the allowable error range, which verifies the feasibility and superiority of TORUS-NS topology for VAWT.
##plugins.generic.usageStats.downloads##
参考
K.-Y. Shen, “Wind energy resources and wind power generation in China,” Northwest Hydropower, vol. 29, no. 1, pp. 76-80, 2010.
Y. Huang, T. Zhou, and J. Dong, “An overview on developments and researches of axial flux permanent magnet machines,” Proceedings of the CSEE, vol. 35, no. 1, pp. 192-204, 2015.
Z. Geng and G. Li, “Overview of axial flux permanent － magnet machine,” Small & Special Electrical Machines, vol. 43, no. 9, pp. 88-99, 2015.
D. He, “The Design Study for Disk-type Permanentmagnet Synchronous Generator in the Wind Power Generation System,” Changsha: Hunan University, 2006.
X. Wei, “Research of a Multistage Axial Flux Permanent Magnet Machine,” Wuhan: Huazhong University of Science and Technology, 2015.
F. G. Cappon, G. De Donato, and F. Caricchi, “Recent advances in axial-flux permanent-magnet machine technology,” IEEE Transactions on Industry Applications, vol. 48, no. 6, pp. 2190-2203, 2012.
T. J. Woolmer and M. D. McCulloch, “Analysis of the yokeless and segmented armature machine,” International Electric Machines & Drives Conference, IEEE, Antalya, 2007.
T. Sun, “Research on Small Vertical - Axis Wind Turbine for Distributed Power Generation,” Shijiazhuang: Hebei University of Science and Technology, 2017.
J. Zhu, D.-D. Song, and Q.-L. Han, “Comparative research on performance of iron and ironless axial flux wind generators,” Journal of Astronautic Metrology and Measurement, vol. 38, no. 4, pp. 79- 85, 2018.
X. Wang and R. Tang, “Optimization of disk coreless permanent magnet synchronous motor based on Halbach—the wedgy airgap motor,” Transactions of China Electrotechnical Society, vol. 22, no. 3, pp. 2-5, 2007.
H. Li and J. Shen, “FEA-based design and comparative study of axial flux permanent magnet machines with various topologies,” Transactions of China, Electrotechnical Society, vol. 30, no. 14, pp. 32-40, 2015.
A. Arkadan, T. M. Hijazi, and B. Masri, “Design evaluation of conventional and toothless stator wind power axial-flux PM generator,” IEEE Transactions on Magnetics, vol. 53, no. 6, pp. 1-4, 2017.
C. Chen and Y. Wang, “Optimal design of axialflux permanent magnet motors based on the efficiency and temperature rise,” Proceedings of the CSEE, vol. 36, no. 6, pp. 1686-1692, 2016.
Y. Cao, Y. Huang, L. Jin, and M. Hu, “Design and analysis of a stator coreless axial-flux permanent magnet machine with module poles,” Proceedings of the CSEE, vol. 34, no. 6, pp. 903-907, 2014.
J.-C. Zhao, “Electromagnetic design and simulation of disc type coreless permanent generator,” Small & Special Electrical Machines, vol. 45, no. 6, pp. 45-53, 2017.
J. Zhu and S. Li, “Multi-objective optimisation design of air cored axial flux PM generator,” IET Electric Power Applications, vol. 12, no. 9, pp. 1390-1395, 2018.
E. Aycicek, N. Bekiroglu, and I. Senol, “Rotor configuration for cogging torque minimization of the open-slot structured axial flux permanent magnet synchronous motors,” The Applied Computational Electromagnetics Society, vol. 30, no. 4, pp. 396-408, 2015.
S. Wu and S. Zuo, “Magnet modification to reduce pulsating torque for axial flux permanent magnet synchronous machines,” The Applied Computational Electromagnetics Society, vol. 31, no. 3, pp. 294-303, 2016.
B. Xia, “Research on Axial Flux Permanent Magnet Machine for Small-scale Vertical-axis Wind Power Application,” Hangzhou: Zhejiang University, 2011.
D.-R. Luo and Y.-N. Wang, “Design study of disktype permanent-magnet synchronous generator,” Journal of Hunan University (Natural Sciences), vol. 33, no. 3, pp. 46-49.
