Design and Implementation of Frequency Selective Radome for X-Band Applications
关键词:
Endfire radiation, frequency selective radome, unit cell, Vivaldi antenna摘要
A triple layer X-band FSS is designed and its reflection and transmission characteristics are explored for normal/oblique incidence. The proposed planar FSS is confirmed by simulation and measurement results. Then, by using the X-band FSS, a novel X-band radome is designed. Its reflection and transmission characteristics are investigated for in-band and out-of band frequencies by integrating an ultra-wide band antenna. A comparison of radiation patterns at selected frequencies for cases with and without radome is examined. Adaptation of radome to the antenna is achieved without significant reduction in radiation performance at the design frequency of FSS.
##plugins.generic.usageStats.downloads##
参考
R. Mittra, C. H. Chan, and T. Cwik, “Techniques for analysing frequency selective surfaces – A review,” Proc. IEEE, vol. 76, pp. 1593-1615, 1988.
X. Q. Lin., T. J. Cui, Y. Fan, et al., “Frequency selective surface designed using electric resonant structures in terahertz frequency bands,” J. of Electromagnetic Waves Appl., vol. 23, pp. 21-29, 2009.
P. S. Taylor, A. C. M. Austin, E. A. Parker, et al., “Angular independent frequency selective surfaces for interference control in indoor wireless environments,” Electronics Letters, vol. 48, pp. 61-62, 2012.
G. I. Kiani, L. G. Olsson, A. Karlsson, et al., “Transmission of infrared and visible wavelengths through energy-saving glass due to etching of frequency-selective surfaces,” IET Microw. Antennas Propag., vol. 7, pp. 955-961, 2010.
R. Panwar and J. R. Lee, “Progress in frequency selective surface-based smart electromagnetic structures: A critical review,” Aerospace Science and Technology, vol. 66, pp. 216-234, 2017.
B. A. Munk, Frequency Selective Surfaces: Theory and Design. Wiley-Interscience, New York, 2000.
M. Wang, L. Zhao, J. Wang, et al., “A low-profile miniaturized frequency selective surface with insensitive polarization,” Applied Computational Electromagnetics Society Journal, vol. 33, no. 9, pp. 1003-1008, 2018.
Y. Lin, X. Xu, Z. Dou, et al., “A novel multi-band polarization insensitive frequency selective surface based on centrosymmetric L-shaped metal strips,” Applied Computational Electromagnetics Society Journal, vol. 30, no. 3, 2015.
H. Wang, P. Kong, W. Cheng, et al., “Broadband tenability of polarization-insensitive absorber based on frequency selective surface,” Scientific Reports, vol. 6, pp. 1-8, 2016.
F. Deng, X. Xi, J. Li, et al., “A method of designing a field-controlled active frequency selective surface,” IEEE Antennas and Wireless Propagation Letters, vol. 14, pp. 630-633, 2015.
S. H. Mahmood and T. A. Denidni, “Pattern-reconfigurable antenna using a switchable frequency selective surface with improved bandwidth,” IEEE Antennas and Wireless Propagation Letters, vol. 15, pp. 1148-1151, 2016.
M. Z. Joozdani, M. K. Amirhosseini, and A. Abdolali, “Wideband radar cross-section reduction of patch array antenna with miniaturised hexagonal loop frequency selective surface,” Electronics Letters, vol. 52, pp. 767-768, 2016.
Y. Liu, Y. Hao, H. Wang, et al., “Low RCS microstrip patch antenna using frequency-selective surface and microstrip resonator,” IEEE Antennas and Wireless Propagation Letters, vol. 14, pp. 1290-1293, 2015.
Y. Jia, Y. Liu, H. Wang, et al., “Low RCS microstrip antenna using polarisation-dependent frequency selective surface,” Electronics Letters, vol. 50, pp. 978-979, 2014.
K. Yu, Y. Li, and X. Liu, “Mutual coupling reduction of a MIMO antenna array using 3-D novel meta-material structures,” Applied Computational Electromagnetics Society Journal, vol. 33, no. 7, pp. 758-763, 2018.
M. Idrees, S. Buzdar, and S. Khalid, “A miniaturized polarization independent frequency selective surface with stepped profile for shielding applications,” Applied Computational Electromagnetics Society Journal, vol. 31, no. 5, 2016.
N. F. Amini, M. Karimipour, K. Paran, et al., “Optimization of frequency selective surface with simple configuration based on comprehensive formation method,” Applied Computational Electromagnetics Society Journal, vol. 30, no. 4, 2015.
N. Liu, X. Sheng, C. Zhang, et al., “Design of frequency selective surface structure with high angular stability for radome application,” IEEE Antennas and Wireless Propagation Letters, vol. 17, pp. 138-141, 2018.
M. Qu, M. Rao, S. Li, et al., “Tunable antenna radome based on graphene frequency selective surface,” AIP Advances, vol. 7, pp. 1-7, 2017.
B. Lin, S. Du, H. Zhang, et al., “Design and simulation of frequency-selective radome together with a monopole antenna,” ACES Journal, vol. 7, pp. 620-625, 2010.
B. Lin, F. Li, Q. R. Zheng, et al., “Design and simulation of a miniature thick-screen frequency selective surface radome,” IEEE Antennas and Wireless Propagation Letters, vol. 8, pp. 1065- 1068, 2009.
L. L. Zhang, J. H. Zhang, X. L. Chen, et al., “Modified silica ceramic for frequency selective surface radome,” Journal of the Ceramic Society of Japan, vol. 123, pp. 937-941, 2015.
I. Choi, D. Lee, and D. G. Lee, “Hybrid composite low-observable radome composed of E-glass/ aramid/epoxy composite sandwich construction and frequency selective surface,” Composite Structures, vol. 117, pp. 98-104, 2014.
R. Orr, V. Fusco, D. Zelenchuk, G. Goussetis, et al., “Circular polarization frequency selective surface operating in ku and ka band,” IEEE Trans. Antennas Propag., vol. 63, pp. 5194-5197, 2015.
S. Cimen, “Novel closely spaced planar dual-band frequency-selective surface,” IET Microw. Antennas Propag., vol. 7, pp. 894-899, 2013.
F. Bayatpur and K. Sarabandi, “Tuning performance of metamaterialbased frequency selective surfaces,” IEEE Trans. Antennas Propag., vol. 57, pp. 590- 592, 2009.
Z. Sipus, M. Bosiljevac, and S. Skokic, “Analysis of curved frequency selective surfaces,” Report, p. 48, 2007.
M. N. Jazi, M. R. Chaharmir, J. Shaker, and A. R. Sebak, “Broadband transmitarray antenna design using polarization-insensitive frequency selective surfaces,” IEEE Trans. Antennas Propag., 64, vol. 1, pp. 99-108, 2016.
Z. Sipus, M. Bosiljevac, and S. Skokic, “Analysis of curved frequency selective surfaces,” The Second European Conference on Antennas and Propagation (EuCAP 2007), Edinburgh, UK, pp. 1-5, 2007.