Multiple Rectangular Slotted Patch Antenna with Roof-top Shaped at 15.3 GHz

作者

  • Melis Ecem Koca Department of Electrical & Electronics Engineering Istanbul Commerce University, Istanbul, Turkey
  • Tahsin Durak Department of Technology, NSU, Norfolk, VA
  • S. Taha Imeci Department of Electrical & Electronics Engineering Int. University of Sarajevo, Bosnia and Herzegovina

关键词:

Mobile equipment, rectangular slot, roof shaped, single band, wireless communication

摘要

In this paper, a compact sized, high frequency microstrip patch antenna with probe feeding is designed, simulated, built and tested. The patch of the antenna is diamond shaped which has a rectangular slot in the upper-center. Main contribution of the paper is to perturb the side edges of the patch and to add a rectangular slot. Parametric study of that twosubstrate change was investigated. The proposed structures were simulated by using the Sonnet Suites, a planar 3-D electromagnetic simulation software which gave S11 value of -13.82 dB and gain value of 6.33 dB at 15.3 GHz.

##plugins.generic.usageStats.downloads##

##plugins.generic.usageStats.noStats##

参考

B. Sharma, V. Sharma, D. Bharadwaj, K. B. Sharma, V. K. Saxena, J. S. Saini, and D. Bhatnagar, “Broadband dual frequency pentagonal microstrip antenna for wireless communication systems,” Proceedings of International Conference on Microwave - 08, 2008.

M. Tecpoyotl-Torres and J. G. Vera-Dimas, “Dual band pentagonal microstrip antenna for Wi-Fi applications,” 2010 IEEE Electronics, Robotics and Automotive Mechanics Conference, pp. 255, 2010.

R. Garg, P. Bhartia, I. Bahl, and A. Ittipiboon, Microstrip Antenna Design Handbook. Artech House, 2001.

M. John, B. Manoj, and S. Rodrigues, “Design of slotted rectangular microstrip patch antenna operated in ISM band using RT-Duroid substrate,” International Conference on Electrical, Electronics, and Optimization Techniques (ICEEOT), 2016.

S. D. Mahamine, R. S. Parbat, S. H. Bodake, and M. P. Aher, “Effects of different substrates on rectangular microstrip patch antenna for S-band,” 2016 International Conference on Automatic Control and Dynamic Optimization Techniques (ICACDOT), 2016.

Z. N. Chen, Antennas for Portable Devices. John Wiley & Sons, 2007.

K. P. Yang and K. L. Wong, “Dual-band circularly polarized square microstrip antenna,” IEEE Trans. Antennas Propag., vol. 49, no. 3, pp. 377-382, Mar. 2001.

J. Y. Jan and K. L. Wong, “A dual-band circularly polarized stacked elliptic microstrip antenna,” Microw. Opt. Technol. Lett., vol. 24, no. 5, pp. 354-357, Mar. 2000.

S. H. S. Esfahlani, A. Tavakoli, and P. Dehkhoda, “A Compact singlelayer dual-band microstrip antenna for satellite applications,” IEEE Antennas Wireless Propag. Lett., vol. 10, 2011.

Y. K. Jung and B. Lee, “Dual-band circularly polarized microstrip RFID reader antenna using metamaterial branch-line coupler,” IEEE Antennas Wireless Propag. Lett., vol. 10, 2011.

D. M. Pozar,“Microstrip antenna coupled to microstripline,” Electron Lett., vol. 21, no. 2, pp. 49-50, Jan. 1995.

C. G. Kakoyiannis, G. Stamatiou, and P. Constantinou, “Small square meander-line antennas with reduced ground plane size for multimedia WSN nodes,” Antennas and Propagation, 2009, EuCAP 2009, 3rd European Conference on, IEEE, 2009.

P. M. Shanmugam and M. A. M. Mohamed, “A CPW Fed Star Shaped Patch Antenna for WSN Applications,” Second International Conference on Electrical and Communication Technology 2016, pp. 182-187.

R. E. Munson, “Conformal microstrip antennas and microstrip phased arrays,” IEEE Trans. Antennas Propagation, vol. AP-22, pp. 74-78, Jan. 1974.

P. Soontornpipit, C. M. Furse, and Y. C. Chung, “Design of Implantable Microstrip Antenna for Communication with Medical Implants,” in IEEE Transactions on Microwave Theory and Techniques, vol. 52, no. 8, Aug. 2004.

Sonnet Suites, ver. 17.52, www.sonnetsoftware.com

##submission.downloads##

已出版

2021-07-14

栏目

General Submission