Coupled Electromechanical Analysis of a Permanent-Magnet Bearing
关键词:
Computational electromagnetic, coupled analysis, magnetic bearings, magnetic levitation, permanent magnets摘要
In this paper we present a new Permanent Magnets (PMs) bearing, which is composed of a rotor capable to levitate at a short distance from a dedicated stator. Proper configurations of PMs arranged on both the stator and the rotor allows having the magnetic suspension. Intrinsic mechanical instability characterizes the device; a passive stabilization is attempted exploiting eddy currents on a conducting sheet that surrounds the magnets on the stator. The system has been simulated by means of a dedicated numerical code that takes into account the effects of magneto-mechanical coupling. The coupled problem has been integrated by means of a prediction-correction nested scheme. Some interesting results, extensively discussed here, has been produced by simulation activity. In particular the stability of to the center of mass with respect to the translations has been passively obtained, if the rotations are actively prevented.
##plugins.generic.usageStats.downloads##
参考
V. Kozorez and O. Cheborin, “On stability of equilibrium in a system of two ideal current rings,” in Dokl. Akad. Nauk UkrSSR, Ser. A, vol. 4, pp. 80- 81, 1988.
F. C. Moon, Chaotic and Fractal Dynamics: Introduction for Applied Scientists and Engineers. John Wiley & Sons, 2008.
H.-W. Lee, K.-C. Kim, and J. Lee, “Review of maglev train technologies,” IEEE Trans. Mag., vol. 42, no. 7, pp. 1917-1925, 2006.
J. Meins, L. Miller, and W. Mayer, “The high speed maglev transport system transrapid,” IEEE Trans. Mag., vol. 24, no. 2, pp. 808-811, 1988.
N. Amati, A. Tonoli, F. Impinna, and J. Girardello Detoni, “A solution for the stabilization of electrodynamic bearings: Modeling and experimental validation,” Journal of Vibration and Acoustics, vol. 133, pp. 021 004-1, 2011.
A. Tonoli, N. Amati, F. Impinna, J. G. Detoni, H. Bleuler, and J. Sandtner, “Dynamic modeling and experimental validation of axial electrodynamic bearings,” in Proc. of the 12th Int. Symposium on Magnetic Bearings, pp. 68-73, 2011.
M. Ono, S. Koga, and H. Ohtsuki, “Japan’s superconducting maglev train,” IEEE Instrum. & Measur. Magazine, vol. 5, no. 1, pp. 9-15, 2002.
E. Diez-Jimenez, J.-L. Perez-Diaz, and J. C. GarciaPrada, “Local model for magnet-superconductor mechanical interaction: Experimental verification,” Journal of Applied Physics, vol. 109, no. 6, (063901), 2011.
M. Ceraolo, G. Lutzemberger, and D. Poli, “Aging evaluation of high power lithium cells subjected to micro-cycles,” Jour. of Energy Storage, vol. 6, pp. 116-124, 2016.
S. Barsali, M. Ceraolo, R. Giglioli, and D. Poli, “Storage applications for smartgrids,” Electric Power System Research (EPSR), vol. 120, pp. 109- 117, Mar. 2015.
A. Musolino, R. Rizzo, M. Tucci, and V. M. Matrosov, “A new passive maglev system based on eddy current stabilization,” IEEE Trans. Mag., vol. 45, no. 3, pp. 984-987, 2009.
A. Musolino, M. Raugi, R. Rizzo, and E. Tripodi, “Stabilization of a permanent-magnet MAGLEV system via null-flux coils,” in IEEE Trans. on Plasma Sci., vol. 43, no. 5, pp. 1242-1247, 2015.
S. Earnshaw, “On the nature of the molecular forces which regulate the constitution of the luminiferous etherg,” Trans. Camb. Phil. Soc., vol. 7, pp. 97-112, 1842.
K. Halbach, “Application of permanent magnets in accelerators and electron storage rings,” Journal of Applied Physics, vol. 57, no. 8, pp. 3605-3608, 1985.
S. Barmada, A. Musolino, M. Raugi, and R. Rizzo, “Analysis of the performance of a combined coilrail launcher,” IEEE Trans. Mag., vol. 39, no. 1, pp. 103-107, Jan. 2003.
A. Musolino, M. Raugi, and B. Tellini, “3-D field analysis in tubular induction launcher with armature transverse motion,” IEEE Trans. Magn., vol. 35, no. 1, pp. 154-159, Jan. 1999.
R. Albanese, M. Canali, A. Musolino, M. Raugi, G. Rubinacci, and S. Stangherlin, “Analysis of a transient nonlinear 3-D eddy current problem with differential and integral methods,” IEEE Trans. Magn., vol. 32, no. 3, pp. 776-779, May 1996.
E. Tripodi, A. Musolino, R. Rizzo, and M. Raugi, “A new predictor-corrector approach for the numerical integration of coupled electromechanical equations,” Int. J. for Num. Meth. in Eng., vol. 105, no. 4, pp. 261-285, 2016.
S. Quondam Antonio, A. Faba, G. Carlotti, and E. Cardelli, “Vector hysteresis model identification for iron-silicon thin films from micromagnetic simulations,” Physica B: Condensed Matter, vol. 486, pp. 97-100, 2016.
S. Barmada, A. Musolino, M. Raugi, and R. Rizzo, “Analysis of the performance of a multi-stage pulsed linear induction launcher,” in IEEE Trans. on Magn., vol. 37, no. 1, pp. 111-115, Jan. 2001.
A. Musolino, R. Rizzo, and E. Tripodi, “The double-sided tubular linear induction motor and its possible use in the electromagnetic aircraft launch system,” in IEEE Trans. on Plasma Sci., vol. 41, no. 5, pp. 1193-1200, 2013.
A. Musolino, R. Rizzo, and E. Tripodi, “Tubular linear induction machine as a fast actuator: Analysis and design criteria,” Progress In Electromag. Research, vol. 132, pp. 603-619, 2012.
A. Musolino, R. Rizzo, and E. Tripodi, “Travelling wave multipole field electromagnetic launcher: An SOVP analytical model,” in IEEE Trans. on Plasma Sci., vol. 41, no. 5, pp. 1201-1208, 2013.
