Sensorless Speed Control for Dual Stator Induction Motor Drive Using IFOC Strategy with Magnetic Saturation
关键词:
Dual Stator Induction Machine (DSIM), Field Oriented Control (F.O.C), magnetic saturation, magnetizing inductance摘要
A method of a sensorless indirect rotor-fieldoriented control of a dual stator induction motor with magnetic saturation is proposed in this paper. Magnetic characteristics of the dual stator induction motor indicate a nonlinear behavior. The computational electromagnetic dq model when the dual stator are fed by an independently current-controlled pulse width modulation (PWM) two identical three-phase voltage source inverters. By controlling the machine’s phase currents, harmonic elimination and torque ripple reduction techniques could be observed. The unbalanced current sharing between the dual stator winding sets is eliminated. High accuracy and performance is obviously demonstrated by comparing experimental and simulation results both in electromagnetic and dynamic features.
##plugins.generic.usageStats.downloads##
参考
T. Yuvaraja and K. Ramya, “Vector control of PMSM take over by photovoltaic source,” ACES Express Journal, vol. 1, no. 6, June 2016.
M. R. Barzegaran, A. Sarikhani, and O. A. Mohammed, “An optimized equivalent source modeling for the evaluation of time harmonic radiated fields from electrical machines and drives,” Applied Computational Electromagnetics Society (ACES) Journal, vol. 28, no. 4, pp. 273-283, Apr. 2013.
B. S. Marwa, A. K. Mohamed, B. F. Mouldi, and R. Habib, “Analysis of saturated self-excited dual stator induction generator for wind energy generation,” Journal of Circuits, Systems, and Computers, vol. 24, no. 9, pp. 196-203, 2015.
B. S. Marwa, A. K. Mohamed, B. F. Mouldi, and R. Habib, “Modeling of dual stator induction generator with and without cross saturation,” Journal of Magnetics, vol. 20, no. 3, pp. 165-171, 2015.
E. Aycicek, N. Bekiroglu, I. Senol, and Y. Oner, “Rotor configuration for cogging torque minimization of the open slot structured axial flux permanent magnet synchronous motors,” ACES Journal, vol. 30, no. 4, Apr. 2015.
R. Sadouni and A. Meroufel, “Indirect rotor fieldoriented control (IRFOC) of a dual star induction machine (DSIM) using a fuzzy controller,” Acta Polytechnica Hungarica., vol. 9, no. 4, pp. 177-192, 2012.
A. S. Abdel-Khalik, M. I. Masoud, and B. W. Williams, “Vector controlled multiphase induction machine: Harmonic injection using optimized constant gains,” Electric Power Systems Research, vol. 89, no. 15, pp. 116-128, 2012.
B. S. Marwa, A. K. Mohamed, B. F. Mouldi, and R. Habib, “Effect of the stator mutual leakage reactance of dual stator induction generator,” International Journal of Electrical Energy, vol. 2, no. 3, pp. 1810- 1818, 2014.
M. B. Slimene and M. A. Khlifi, “Performance limits of three-phase self-excited induction generator (SEIG) as a stand alone DER,” Journal of Electrical Engineering and Technology (JEET), vol. 12, no. 1, 2017.
A. S. Abdel-Khalik and S. M. Gadoue, “Improved flux pattern by third harmonic injection for multiphase induction machines using neural network,” Alexandria Engineering Journal, vol. 50, no. 12, pp. 163-169, 2011.
A. K. Mohamed, B. S. Marwa, B. F. Mouldi, and R. Habib, “Performance evaluation of self-excited DSIG as a stand-alone distributed energy resource,” Electrical Engineering, Springer, vol. 97, no. 4, pp. 261- 345, 2016.
J. H. Alwash and L. J. Qaseer, “Three-dimension finite element analysis of a helical motion induction motor,” ACES Journal, vol. 25, no. 8, pp. 703-712, Aug. 2010.
A. Shiri and A. Shoulaie, “Investigation of frequency effects on the performance of single sided linear induction motor,” ACES Journal, vol. 27, no. 6, pp. 497-504, June 2012.
B. S. Marwa, A. K. Mohamed, B. F. Mouldi, and R. Habib, “Modeling and analysis of double stator induction machine supplied by multi-level inverter,” 16th IEEE Mediterranean Electrotechnical Conference (MELECON), IEEE, 2012.
M. Hassani and A. Shoulaie, “Dynamic modeling of linear actuator using fuzzy system to approximate magnetic characteristics,” ACES Journal, vol. 30, no. 8, Aug. 2015.
A. K. Mohamed and R. Habib R, “General modeling of saturated AC machines for industrial drives,” COMPEL: The International Journal for Computation and Mathematics in Electrical and Electronic Engineering, vol. 35, no. 1, pp. 44-63, 2016.
