Formulations for Modeling Voltage Sources with RLC Impedances in the FDTD Method
关键词:
Finite-difference time-domain method, impedance modeling, source modeling摘要
Voltage sources are modeled with constant resistive internal impedances when simulated in the finite-difference time-domain (FDTD) method in most of the applications. However, some applications, such as an RFID tag antenna in radiation mode, require modeling of voltage sources with frequency dependent complex impedances. If the frequency dependent behavior of the complex impedance of a voltage source follows that of an RLC circuit, the voltage source can be modeled with an RLC internal impedance in the FDTD method for wide-band simulations. This paper presents FDTD formulations to model a voltage source with an RLC impedance for the cases where the RLC circuit is a series or a parallel connected RL, RC, or an RLC configuration.
##plugins.generic.usageStats.downloads##
参考
A. Taflove and S. C. Hagness, Computational Electrodynamics. Artech House, Boston, 2005.
A. Z. Elsherbeni and V. Demir, The Finitedifference Time-domain Method for Electromagnetics with MATLAB Simulations. SciTech Pub., Raleigh, NC, 2009.
M. Piket-May, A. Taflove, and J. Baron, “FD-TD modeling of digital signal propagation in 3-D circuits with passive and active loads,” IEEE Transactions on Microwave Theory and Techniques, vol. 42, no. 8, pp. 1514-1523, 1994.
W. Sui, D. A. Christensen, and C. H. Durney, “Extending the two-dimensional FDTD method to hybrid electromagnetic systems with active and passive lumped elements,” IEEE Transactions on Microwave Theory and Techniques, vol. 40, no. 4, pp. 724-730, 1992.
O. P. M Pekonen, J. Xu, and K. I. Nikoskinen, “Rigorous analysis of circuit parameter extraction from an FDTD simulation excited with a resistive voltage source,” Microwave and Optical Technology Letters, vol. 12, no. 4, pp. 205-210, 1996.
R. Gillard, S. Dauguet, and J. Citerne, “Correction procedures for the numerical parasitic elements associated with lumped elements in global electromagnetic simulators,” IEEE Transactions on Microwave Theory and Techniques, vol. 46, no. 9, pp. 1298-1306, 1998.
R. M. Mäkinen and M. Kivikoski, “A stabilized resistive voltage source for FDTD thin-wire models,” IEEE Transactions on Antennas and Propagation, vol. 51, no. 7, pp. 1615-1622, 2003.
S. Watanabe and M. Taki, “An improved FDTD model for the feeding gap of a thin-wire antenna,” IEEE Microwave and Guided Wave Letters, vol. 8, no. 4, pp. 152-154, 1998.
Higgs 4 IC Datasheet, Available at: http://www. alientechnology.com/wpcontent/uploads/AlienTechnology-Higgs-4-ICDatasheet.pdf.
J. Pereda, F. Alimenti, P. Mezzanotte, L. Roselli, and R. Sorrentino, “A new algorithm for the incorporation of arbitrary linear lumped networks into FDTD simulators,” IEEE Transactions on Microwave Theory and Techniques, vol. 47, no. 6, pp. 943-949, 1999.
J.-Y. Lee, J.-H. Lee, and H.-K. Jung, “Linear lumped loads in the FDTD method using piecewise linear recursive convolution method,” IEEE Microwave and Wireless Components Letters, vol. 16, no. 4, pp. 158-160, 2006.
C.-C. Wang and C.-W. Kuo, “An efficient scheme for processing arbitrary lumped multiport devices in the finite-difference time-domain method,” IEEE Transactions on Microwave Theory and Techniques, vol. 55, no. 5, pp. 958-965, 2007.
Z.-H. Chen and Q.-X. Chu, “FDTD modeling of arbitrary linear lumped networks using piecewise linear recursive convolution technique,” Progress in Electromagnetics Research, vol. 73, pp. 327- 341, 2007.
P. Ciampolini, P. Mezzanotte, L. Roselli, and R. Sorrentino, “Accurate and efficient circuit simulation with lumped-element FDTD technique,” IEEE Transactions on Microwave Theory and Techniques, vol. 44, no. 12, pp. 2207-2215, 1996.
V. S. Reddy and R. Garg, “An improved extended FDTD formulation for active microwave circuits,” IEEE Transactions on Microwave Theory and Techniques, vol. 47, no. 9, 1603-1608, pp. 1999.
T.-L. Wu, S.-T. Chen, and Y.-S. Huang, “A novel approach for the incorporation of arbitrary linear lumped network into FDTD method,” IEEE Microwave and Wireless Components Letters, vol. 14, no. 2, pp. 74-76, 2004.
R. M. Joseph, S. C. Hagness, and A. Taflove, “Direct time integration of Maxwell’s equations in linear dispersive media with absorption for scattering and propagation of femto second electromagnetic pulses,” Optics Letters, vol. 16, no. 18, pp. 1412-1414, 1991.
O. P. Gandhi, B.-Q. Gao, and J.-Y. Chen, “A frequency-dependent finite-difference time-domain formulation for general dispersive media,” IEEE Transactions on Microwave Theory and Techniques, vol. 41, no. 4, pp. 658-665, 1993.
T. Kashiwa and I. Fukai, “A treatment by the FDTD method of the dispersive characteristics associated with electronic polarization,” Microwave and Optical Technology Letters, vol. 3, no. 6, pp. 203-205, 1990.
M. Okoniewski, M. Mrozowski, and M. A. Stuchly, “Simple treatment of multi-term dispersion in FDTD,” IEEE Microwave and Guided Wave Letters, vol. 7, no. 5, pp. 121-123, 1997.
Y. Takayama and W. Klaus, “Reinterpretation of the auxiliary differential equation method for FDTD,” IEEE Microwave and Wireless Components Letters, vol. 12, no. 3, pp. 102-104, 2002.
C. H. Durney, W. Sui, D. A. Christensen, and J. Zhu, “A general formulation for connecting sources and passive lumped-circuit elements across multiple 3D FDTD cells,” IEEE Microwave and Guided Wave Letters, vol. 6, no. 2, pp. 85-87, 1996.
W. Thiel and L. P. B. Katehi, “Some aspects of stability and numerical dissipation of the finitedifference time-domain (FDTD) technique including passive and active lumped elements,” IEEE Transactions on Microwave Theory and Techniques, vol. 50, no. 9, pp. 2159-2165, 2002.
L. Borzetta, F. Alimenti, P. Ciampolini, P. Mezzanotte, L. Roselli, and R. Sorrentino, “Numerical parasitic reactances at the interface between FDTD mesh and lumped elements,” 1999 IEEE MTT-S International Microwave Symposium Digest, vol. 4, pp. 1585-1588, 1999.
W. Thiel and W. Menzel, “Full-wave design and optimization of mm-wave diode-based circuits in finline technique,” IEEE Transactions on Microwave Theory and Techniques, vol. 47, no. 12, pp. 2460-2466, 1999.
