Reconstruction automatique des entités d’un modèle BREP à partir d’un maillage déformé
DOI:
https://doi.org/10.13052/EJCM.18.177-194Keywords:
integration, simulation, analysis, reconstruction, CAD, BREPAbstract
Nowadays, the integration of the different steps of mechanical design process (Design, analysis and manufacturing) is a necessity to reduce the time of design and optimization. This tendency of integrating CAD/CAM/Analysis and automation of the corresponding processes requires shared data between the various tasks using an integrated product model. Our research is oriented to CAD/CAM/Analysis integration by rebuilding the CAD model (BREP) starting from the FE results (deformed mesh). This paper presents techniques for rebuilding the geometrical and topological entities of the CAD model starting from a deformed mesh.
Downloads
References
Aifaoui N., Intégration CAO/Calcul, une approche par les features de calcul, Thèse de
Doctorat, Université de Valenciennes, Juillet 2003.
Fine L., Processus et méthodes d’adaptation et d’idéalisation de modèles dédiés à l’analyse de
structures mécaniques, Thèse de doctorat, Institut nationale polytechnique de Grenoble,
Francois V., Cuillère J.C., “3D Automatic remeshing applied to model modification”,
Computer-Aided Design, vol. 32, no 7, 2000, p. 433-444.
Joon C. Park, Yun C.Chung, “A tolerant approach to reconstruct topology from unorganized
trimmed surfaces”, Computer Aided Design, vol. 35, 2003, p. 807-812.
Jung H. B. and Kim K., “A New Parameterisation Method for NURBS Surface
Interpolation”, The International journal of Advanced Manufacturing Technology,
vol. 16, 2000, p. 784-790.
Kruth J.-P., Kerstens A., “Reverse engineering modelling of free-form surfaces from point
clouds subject to boundary conditions”, Journal of Materials Processing Technology,
vol. 76, 1998, p. 120-127.
Louhichi B., BenAmara A., François V., « Intégration CAO/Calcul par reconstruction des
modèles CAO à partir des résultats de calcul », Revue Internationale d’Ingénierie
Numérique, vol. 1, n° 1, 2005, p. 9-26.
Ma Weiyin, Ma Xiaohu, Shiu-Kit Tso, Zhigeng Pan, “A direct approach for subdivision
surface fitting from a dense triangle mesh”, Computer Aided Design, vol. 36, 2004,
p. 525-536.
Mortenson E. Michael, Geometric Modeling, Wiley, New York, 1985.
Morvan J.M., Thibert B., “On the approximation of a smooth surface with a triangular mesh”,
Computational Geometry, vol. 23, 2002, p. 337-352.
Opencascade www.Opencascade.com.
Petr Krysl, Micheal Ortiz, “Extraction of boundary representation from surface
triangulations”, International journal for numerical methods in engineering, vol. 50,
, p. 1737-1758.
Piegl L.A. and Tiller W., The NURBS book, Springer-Verlag, 1997.
Praveen Kashyap, “Geometric interpretation of continuity over triangular domains”,
Computer Aided Geometric Design, vol. 15, 1998, p. 773-786.
Ramon F. Sarraga, “Modifying CAD/CAM surfaces according to displacements prescribed at
a finite set of points”, Computer Aided Design, vol. 36, 2004, p. 343-349.
Ren B.Y., Hagiwara I., “Composite freeform surface reconstruction using recursive interpolating
subdivision scheme”, Computers in Industry, vol. 50, n° 3, 2003, p. 265-275.
Rypl D., Zdenek Bittnar “Triangulation of 3D surfaces reconstructed by interpolating
subdivision”, Computers and Structures, vol. 82, 2004, p. 2093-2103.
Shaoming Wang, “A smooth surface interpolation to 3D triangulations”, Journal of
computation and applied Mathematics, vol. 163, 2004, p. 287-293.
Steven J. Owen and David R. White, “Mesh based geometry: A systematic approach to
constructing geometry from a finite element mesh”, 10th International Meshing
Roundtable Newport Beach, California, U.S.A. 7-10 October 2001.
Steven J. Owen, David R. White, Timothy J. Tautges, “Facet-based surfaces for 3D mesh
generation”, 11th international meshing roundtable, 15-18 September 2002, Ithaca, New
York.
Steven J. Owen, David R. White “Mesh-based geometry”, International Journal for
Numerical Methods in Engineering, vol. 58, n° 2, 2003, p. 375-395.
Shephard M.S., “Meshing environment for geometry-based analysis”, International Journal
for Numerical Methods in Engineering, vol. 47, n° 1-3, 2000, p. 169-190.
Volpin O., Sheffer A., Bercovier M. and Joskowicz, “Mesh simplification with smooth
surface reconstruction”, Computer aided Design, vol. 30, n° 11, 1998, p. 875-882.
Walton D. J. and Meek D. S., “A triangular G1 patch from boundary curves”, Computer
Aided Design, vol. 28, 1996, p. 113-123.
Xu X.Y., Wang Y.Y., “Multi-model technology and its application in the integration of
CAD/CAM/CAE”, Journal of Materials Processing Technology, vol. 129, 2002, p. 563-567.
Xunnian Yang, “Surface interpolation of meshes by geometric subdivision”, Computer Aided
Design, vol. 37, 2005, p. 497-508.
