Orientation optimale des fibres dans les plaques composites multicouches
Keywords:
optimization, composites, fiber orientation, genetic algorithmsAbstract
Determination of the optimal fibers' orientation in a ply of a laminated plate is presented to attain a maximal strength criteria. The optimization method couples genetic algorithms approach with the finite element method. In-plane loaded plates and square plates subjected to bending are optimized in numerical examples.
Downloads
References
[BAC 95] BACK T., Evolutionary Algorithms in theory and practice, Oxford Univ. Press, NYork,
[BAN 95] BANICHUK N.Y., BARSUK A.A., SAURIN V.V., « Orientational design for plates
optimized against instability », in: N. Olhoff, G.I.N. Rozvany (eds), Proc. of the First
World Congress of Structural and Multidisciplinary Optimization, Pergamon, pp. 293-
, 1995.
[BAT 90] BATOZ J.L., DHATI G., Modelisation des structures par elements finis, Vol. 2,
Edition Hermes, 1990.
[CIN 97] CINQUINI C., MARIANI, C., « Non-Uniform Optimal Lamination for Generally
Orthotropic Laminates>>, in: :Gutkowski, W., Mroz, Z. (Eds), Proc. of the Second World
Congress of Structural and Multidisciplinary Optimization, vol.2, Wydawnictwo
/nzynieria, pp. 657-662, 1997.
[DA V 91] DAVIS L., Handbook of genetic algorithm, Van Nostrand Reinhold, N-York, 1991.
[GOL 94] GOLDBERG D.E., AG, exploration, optimisation et apprentissage automatique,
Addison-Wesley France, 1994.
[HAF 92] HAFTKA R.T., WALSH J.L., « Stacking-sequence optimization for buckling of
laminated plates by integer programming », AIAA J. ,30, pp. 814-819, 1992.
[HAM 95] HAMMER V.B., «Energy and Strength Optimization of Laminates», in: N. Olhoff,
G.I.N. Rozvany (Eds), Proc. of the First World Congress of Structural and
Multidisciplinary Optimization, Pergamon, pp. 287-292, 1995.
[HOL 75] HoLLAND J.H., «Adaptation in natural and artificial systems>>, Ann Arbor,
University of Michigan Press, 1975.
[KAS 97] KASAP 1., ORAL, S., « The Effect of Curved Fiber Courses in the Design of
Composites Laminates >>, in: Gutkowski, W., Mroz, Z. (Eds), Proc. of the Second World
Congress of Structural and Multidisciplinary Optimization, vo/.2, Wydawnictwo
/nzynieria, pp. 675-679, 1997.
[KOG 94] KOGISO N., WATSON L.T., GORDAL Z., HAFTKA R.T., « GA with local improvement
for composite laminate design>>, Struct. Optimization ,7, pp. 207-218, 1994.
[LEK 95] LEKSZYCKI T., POGORZELSKI, P., « Optimal Design of Multilayered Viscoelastic
Composite Vibrating Plates >>, in: N. Olhoff, G.I.N. Rozvany (Eds), Proc. of the First
World Congress of Structural and Multidisciplinary Optimization, Pergamon , pp. 531-
, 1995.
[MAR 95] MARCEUN J.L., TROMPETIE P., «Optimization of composite beam structures using
a genetic algorithm>>, Struct. Opt. 7, pp. 236-244, 1995.
[MIC 92] MICHALEWICZ Z., Genetic algorithms + Data structures = Evolution programs,
Springer Verlag, Berlin, Heidelberg, 1992
[MIK 82] MIKI M., « Material design of composite laminates with required in-plane elastic
properties >>. Progress in science and engineering of composites. Hayashi T., Kawata K.,
Umekawa S. (eds), ICCM-IV, Tokyo, pp. 1725-1731, 1982.
[RIC 93] LE RICHE R., HAFfKA R.T., << Optimization of laminate stacking sequence for
buckling load maximization by genetic algorithm>>. AIAA J. ,31, pp. 951-956, 1993.
[TOS 95] TOSHIHIKO 0., ATSUSHI Y., KANEHIRO N., ZENICHIRO M., << Optimum design of
weaving structure of 3-D woven fabric composites by using genetic algorithm >>,
Composite Struct., 32, pp. 417-426, 1995.
