Modeling the Insertion Loss of Structured Ethernet Cabling Standard using the Scattering Parameters

Authors

  • Olusegun Ogundapo School of Engineering, American University of Nigeria, PMB 2250, Yola-Nigeria
  • Charles Nche School of Engineering, American University of Nigeria, PMB 2250, Yola-Nigeria

DOI:

https://doi.org/10.13052/2022.ACES.J.370409

Keywords:

category 8 cabling, Ethernet cables, insertion loss, scattering parameters, structured cabling

Abstract

A method of simulating the insertion loss of different channel configurations of structured Ethernet cabling with reference to standard specifications is presented. The method can aid cable engineers in the study of the performance of Ethernet cabling systems during standardization in order to have a view of what to expect in real life. The paper considered the standard category 8 cabling system as a case study. The method presented used the scattering parameters implemented in Matrix Laboratory (MATLAB) to model the insertion loss of standard category 8 cabling system. The insertion loss simulation results provided good agreements with the standard category 8 cabling system. The method presented will serve as a basis to cable engineers who want to study future structured cabling systems under standardization to aid the design of prototype Ethernet cables.

Downloads

Download data is not yet available.

Author Biographies

Olusegun Ogundapo, School of Engineering, American University of Nigeria, PMB 2250, Yola-Nigeria

Olusegun Ogundapo received the Ph.D. degree in electronic engineering from De Montfort University, United Kingdom, the M.Sc. degree in electrical engineering from Ahmadu Bello University, Zaria, and the B.Eng. degree in electrical and electronic engineering from the Federal University of Technology, Yola now Modibbo Adama University, Yola-Nigeria.

He is currently an Assistant Professor with the School of Engineering, American University of Nigeria, Yola-Nigeria. His research interests are in computational electromagnetics, wireless/wired communication media analysis, modeling, and optimization. Other interests are Internet of Things (IOT), model data, and network analytics.

Charles Nche, School of Engineering, American University of Nigeria, PMB 2250, Yola-Nigeria

Charles Nche is the formal Dean of the Graduate School and currently a faculty in the School of Engineering (SOE), American University of Nigeria (AUN), Nigeria. He received the Ph.D. degree in computer networks from Loughborough University of Technology, Britain. He holds an Electrical and Electronics Engineering degree and a Master’s degree in digital communication systems.

He has worked for several companies, including BroadCom, Marconi, Mitel, etc. His research interest is centered on providing capacity, improving coverage, and increasing the efficiency of the network, using heterogeneous network (HETNET) and device-to-device communications (D2D). His other areas of interest include, but not limited to, high speed networks (40GBase-T System); wireless infrastructures and networks, resource allocation within 4G/5G networks using AI (ML and DL), and PV systems’ performance.

References

S. Vaden, “Inside the specifications of the new category 8 cabling standard,” in Cabling Installation and Maintenance Magazine, vol. 24, no. 8, pp. 27-29, Aug. 2016.

C. DiMinico, “40GBASE-T channel insertion loss,” in IEEE P802.3bq 40GBASE-T Task Force Study Group Public Area, vol. 3, no. 11, Nov.2016.

ANSI/TIA-568-C2-1, Addendum 1, Balanced twisted pair cabling and components standard: specifications for category 8 cabling, vol. 6, no. 7, Jul. 2016.

O. Ogundapo, A. Duffy, C. Nche, and J. Gow, “Scattering parameters approach to insertion loss prediction for 40 GBASE-T systems over structured cabling,” Proceedings of the World Congress on Engineering, vol. 1, pp. 64-69, Jul.2014.

M. Guo, Q. Chen, D. Sang, Y. Zheng, and Y. Fu, “Dual polarized dual-band frequency selective rasorber with low insertion loss,” IEEE- Antennas and Wireless Propagation Letters, vol. 19, no. 1, pp. 48-52, Jan. 2020.

S. Buhr, X. Xu, M. Kreibig, and F. Ellinger, “A low power fast ethernet physical layer transceiver,” 26th

IEEE International Conference on Electronic Circuits and Systems (ICECS), Italy, pp. 31-37, Nov. 2019.

R. Eltom, E. Hamood, A. Mohammed, and A. Osman, “Early warning firefighting system using internet of things,” International Conference on Computer, Control, Electrical and Electronics Engineering (ICCCEEE), Khartoum, pp. 28-35, Aug. 2018.

F. Straka, “40 Gbits/s over twisted pair copper cable is on the way,” in Electronic Products Magazine, vol. 56, no. 9, pp. 20-22, 2013.

P. Mclaughlin “Category 8 questions answered,” in Cabling Installation and Maintenance Magazine, vol. 23, no. 10, pp. 23-25, Oct.2015.

J. Dobrowolski, “Microwave network design using the scattering matrix,” published by Artech House 2010.

R. Allred and C. Furse, “Linearization of S-parameter cascading for analysis of multiple reflections,” Applied Computational Electromagnetic Society (ACES) Journal, vol. 33, no. 12, Dec.2018.

J. Walling and A. Duffy, “The modeling of 4 pair data grade channels with the aim to use differential mode transmission parameters which are given in the standardized specification requirements,” 57th

International Wire and Cable Symposium, Rhode Island, USA, pp. 532-540, Nov.2008.

J. Young, “The race to 40GBASE-T,” in COMM- SCOPE publication, vol. 3, no. 9, Sep. 2013.

R. Papazyan, P. Petterson, H. Edin, R. Eriksson, and U. Gafvert., “Extraction of high frequency power cable characteristics from S-parameters measurements,” in IEEE Transactions on Dielectrics and Electrical Insulation, vol. 11, no. 3, pp. 461-470, Jun. 2004.

P. Kish, “Channel return loss results,” in IEEEP802.bq 40GBASE-T Task Force Study Group Area, Nov. 2016.

Downloads

Published

2022-04-30

How to Cite

[1]
O. . Ogundapo and C. . Nche, “Modeling the Insertion Loss of Structured Ethernet Cabling Standard using the Scattering Parameters”, ACES Journal, vol. 37, no. 04, pp. 435–440, Apr. 2022.

Issue

Section

General Submission