Millimeter Wave Fuze Radome Design Based Bandpass Frequency Selective Surface

Authors

  • Min Zhao School of Cyber Science and Engineering, Qufu Normal University, Qufu,273165, People's Republic of China
  • Junjian Bi Key Laboratory of Electromagnetic Environmental Effects, Army University of Engineering Shijiazhuang, 050003, People's Republic of China
  • Juan Xu School of Cyber Science and Engineering, Qufu Normal University, Qufu,273165, People's Republic of China,State Key Laboratory of Millimeter Waves, Southeast University, Nanjing, 211189, People's Republic of China
  • Jianping Zhao School of Cyber Science and Engineering, Qufu Normal University, Qufu,273165, People's Republic of China

Keywords:

Bandpass, frequency selective surfaces, millimeter waves, radiation, radome, transmission

Abstract

This paper studies a fuze radome system applied to millimeter waves. The system consists of feed antenna, radome, planar FSS array or curve conformal array. Microstrip antenna is used as the feed antenna. Based on the principle of equispaced and equal period respectively, cross units loading single layer dielectric form planar and curve FSS array. The FSS radome system can improve the permeability of hood to electromagnetic waves (EM) of passband, and reduce the interference of complex EM in the external environment to the system. The FSS radome will not deteriorate radiation characteristics of the feed antenna. The planar FSS radome has a passband of 98.2 GHz to 101.55 GHz with -10dB relative bandwidth of 3.35%. The curve FSS radome has a passband of 96.3 GHz to 101.8 GHz with -10dB relative bandwidth of 5.5%. In addition, the radiation characteristics of the proposed system are analyzed. It is found that the radiation pattern of the antenna is basically consistency before and after loading the radome.

Downloads

Download data is not yet available.

Author Biographies

Min Zhao, School of Cyber Science and Engineering, Qufu Normal University, Qufu,273165, People's Republic of China

Min Zhao was born in Dezhou, Shandong Province, China in 1996. She received the B.S. degree in Communication Engineering from QuFu Normal University, Qufu, China, in 2018 and is currently working toward the M.S. degree in Communication and Information Systems at QuFu Normal University. Her research interests include frequency selective surfaces, metamaterials and millimeter wave fields.

Junjian Bi, Key Laboratory of Electromagnetic Environmental Effects, Army University of Engineering Shijiazhuang, 050003, People's Republic of China

Junjian Bi was born in Shijiazhuang, Hebei Province, China, in 1972. He received the Ph.D. degrees in Weapon System and Application Engineering from Beijing University of Technology, Beijing, China, in 2005. At present, he is mainly engaged in the research of electromagnetic environment effect technology of equipment

Juan Xu, School of Cyber Science and Engineering, Qufu Normal University, Qufu,273165, People's Republic of China,State Key Laboratory of Millimeter Waves, Southeast University, Nanjing, 211189, People's Republic of China

Juan Xu was born in Jining, Shandong Province, China, in 1982. She received the Ph.D. degrees in Electronic Science and Technology from Nanjing University of Science and Technology, Nanjing, China, in 2016. Since 2016, she has worked at QuFu Normal University. She has been an associate professor since 2019. Her esearch interests include simulation, design and experimental measurement of new high performance RF, microwave and millimeter wave passive devices, antennas and antenna arrays

Jianping Zhao, School of Cyber Science and Engineering, Qufu Normal University, Qufu,273165, People's Republic of China

Jianping Zhao was born in Heze, Shandong Province, China, in 1964. He received the B.S. degree in Physics from QuFu Normal University, Qufu, China, in 1985. In 1988, he studied in Wuhan University for master's degree in Radio and Information Engineering. Since 1985, he has worked at QuFu Normal University. He was promoted to Associate Professor in 1997, Professor in 2002. Since 1992, he has been the Director of the Radio Teaching and Research Section. He has been engaged in application of electronic technology and scientific research in communication and information system of electronic information engineering and communication engineering.

References

D. M. Syahkal and D. Wake, “Bow-tie antennas on high dielectric substrates for MMIC and OEIC applications at millimetre wave frequencies,” Electronics Letters, vol. 31, no. 24, pp. 2060-2061, Nov. 23, 1995.

P. Hallbjorner, M. Bergstrom, M. Boman, P. Lindberg, E. Ojefors, and A. Rydberg, “Millimetrewave switched beam antenna using multiple travelling-wave patch arrays,” IEE Proceedings - Microwaves, Antennas and Propagation, vol. 152, no. 6, pp. 551-555, Dec. 9, 2005.

B. Wu, Y.-J. Yang, H.-L. Li, Y.-T. Zhao, C. Fan, and W.-B. Lu, “Low-loss dual-polarized frequency-selective rasorber with graphene-based planar resistor,” IEEE Transactions on Antennas and Propagation, vol. 68, no. 11, pp. 7439-7446, Nov. 2020.

H. B. Wang, Y. J. Cheng, and Z. N. Chen, “Wideband and wide-angle FSS using loop slotted hybrid quarter-mode substrate integrated cavity with two independently controllable poles,” IEEE Transactions on Antennas and Propagation, vol. 68, no. 12, pp. 8221-8226, Dec. 2020.

D. Ferreira, R. F. da Silva Caldeirinha, I. Cuiñas, and T. R. Fernandes, “Tunable square slot FSS EC modelling and optimisation,” IET Microwaves, Antennas & Propagation, vol. 11, no. 5, pp. 737- 742, Apr. 15, 2017.

F. Costa, A. Monorchio, and G. Manara, “An overview of equivalent circuit modeling techniques of frequency selective surfaces and metasurfaces,” Applied Computational Electromagnetics Society Journal, vol. 29, no. 12, pp. 960-976, Dec. 2014.

Z. Yu, X. Yang, W. Tang, Y. Shi, J. Zhu, and C. Wang, “Compact three-dimensional bandpass FSS with high selectivity based on split square coaxial waveguide,” Electronics Letters, vol. 55, no. 21, pp. 1135-1137, 2019.

B. Lin, S. Du, H. Zhang, and X. Ye, “Design and simulation of frequency-selective radome together with a monopole antenna,” Applied Computational Electromagnetics Society Journal, vol. 25, no. 7, pp. 620-625, July 2010.

A. A. Omar and Z. Shen, “Thin 3-D bandpass frequency-selective structure based on folded substrate for conformal radome applications,” IEEE Transactions on Antennas and Propagation, vol. 67, no. 1, pp. 282-290, Jan. 2019.

K. K. Varikuntla and R. Singara Velu, “Design and development of angularly stable and polarisation rotating FSS radome based on substrate-integrated waveguide technology,” IET Microwaves, Antennas & Propagation, vol. 13, no. 4, pp. 478-484, 2019.

W.-J. Liao, W.-Y. Zhang, Y.-C. Hou, S.-T. Chen, C. Y. Kuo, and M. Chou, “An FSS-integrated lowRCS radome design,” IEEE Antennas and Wireless Propagation Letters, vol. 18, no. 10, pp. 2076-2080, Oct. 2019.

H. Zhou, S. Qu, B. Lin, J. Wang, H. Ma, Z. Xu, W. Peng, and P. Bai, “Filter-antenna consisting of conical FSS radome and monopole antenna,” IEEE Transactions on Antennas and Propagation, vol. 60, no. 6, pp. 3040-3045, June 2012.

W. Pan, C. Huang, P. Chen, M. Pu, X. Ma, and X. Luo, “A beam steering horn antenna using active frequency selective curface,” IEEE Transactions on Antennas and Propagation, vol. 61, no. 12, pp. 6218-6223, Dec. 2013.

G. Q. Luo, W. Hong, H. J. Tang, J. X. Chen, X. X. Yin, Z. Q. Kuai, and K. Wu, “Filtenna consisting of horn antenna and substrate integrated waveguide cavity FSS,” IEEE Transactions on Antennas and Propagation, vol. 55, no. 1, pp. 92-98, Jan. 2007.

Y. W. Chia (Michael), “Radiation from curved (conical) frequency selective surfaces,” Department of Electronic and Electrical Engineering Loughborough University of Technology, United Kingdom, 1993.

Y. E. Erdemli, K. Sertel, R. A. Gilbert, D. E. Wright, and J. L. Volakis, “Frequency-selective surfaces to enhance performance of broad-band reconfigurable arrays,” IEEE Transactions on Antennas and Propagation, vol. 50, no. 12, pp. 1716-1724, Dec. 2002.

B. Munk, Frequency Selective Surfaces: Theory and Design. John Wiley & Sons, Inc., 2000.

H.-Y. Chen and S.-H. Wen, “An empirical formula for resonant frequency shift due to Jerusalemcross FSS with substrate on one side,” Applied Computational Electromagnetics Society Journal, vol. 33, no. 7, pp. 730-740, July 2018.

Downloads

Published

2021-04-08

How to Cite

[1]
Min Zhao, Junjian Bi, Juan Xu, and Jianping Zhao, “Millimeter Wave Fuze Radome Design Based Bandpass Frequency Selective Surface”, ACES Journal, vol. 36, no. 4, pp. 411–418, Apr. 2021.

Issue

2021: Vol 36 Iss 4

Section

General Submission