Millimeter Wave Fuze Radome Design Based Bandpass Frequency Selective Surface
关键词:
Bandpass, frequency selective surfaces, millimeter waves, radiation, radome, transmission摘要
This paper studies a fuze radome system applied to millimeter waves. The system consists of feed antenna, radome, planar FSS array or curve conformal array. Microstrip antenna is used as the feed antenna. Based on the principle of equispaced and equal period respectively, cross units loading single layer dielectric form planar and curve FSS array. The FSS radome system can improve the permeability of hood to electromagnetic waves (EM) of passband, and reduce the interference of complex EM in the external environment to the system. The FSS radome will not deteriorate radiation characteristics of the feed antenna. The planar FSS radome has a passband of 98.2 GHz to 101.55 GHz with -10dB relative bandwidth of 3.35%. The curve FSS radome has a passband of 96.3 GHz to 101.8 GHz with -10dB relative bandwidth of 5.5%. In addition, the radiation characteristics of the proposed system are analyzed. It is found that the radiation pattern of the antenna is basically consistency before and after loading the radome.
##plugins.generic.usageStats.downloads##
参考
D. M. Syahkal and D. Wake, “Bow-tie antennas on high dielectric substrates for MMIC and OEIC applications at millimetre wave frequencies,” Electronics Letters, vol. 31, no. 24, pp. 2060-2061, Nov. 23, 1995.
P. Hallbjorner, M. Bergstrom, M. Boman, P. Lindberg, E. Ojefors, and A. Rydberg, “Millimetrewave switched beam antenna using multiple travelling-wave patch arrays,” IEE Proceedings - Microwaves, Antennas and Propagation, vol. 152, no. 6, pp. 551-555, Dec. 9, 2005.
B. Wu, Y.-J. Yang, H.-L. Li, Y.-T. Zhao, C. Fan, and W.-B. Lu, “Low-loss dual-polarized frequency-selective rasorber with graphene-based planar resistor,” IEEE Transactions on Antennas and Propagation, vol. 68, no. 11, pp. 7439-7446, Nov. 2020.
H. B. Wang, Y. J. Cheng, and Z. N. Chen, “Wideband and wide-angle FSS using loop slotted hybrid quarter-mode substrate integrated cavity with two independently controllable poles,” IEEE Transactions on Antennas and Propagation, vol. 68, no. 12, pp. 8221-8226, Dec. 2020.
D. Ferreira, R. F. da Silva Caldeirinha, I. Cuiñas, and T. R. Fernandes, “Tunable square slot FSS EC modelling and optimisation,” IET Microwaves, Antennas & Propagation, vol. 11, no. 5, pp. 737- 742, Apr. 15, 2017.
F. Costa, A. Monorchio, and G. Manara, “An overview of equivalent circuit modeling techniques of frequency selective surfaces and metasurfaces,” Applied Computational Electromagnetics Society Journal, vol. 29, no. 12, pp. 960-976, Dec. 2014.
Z. Yu, X. Yang, W. Tang, Y. Shi, J. Zhu, and C. Wang, “Compact three-dimensional bandpass FSS with high selectivity based on split square coaxial waveguide,” Electronics Letters, vol. 55, no. 21, pp. 1135-1137, 2019.
B. Lin, S. Du, H. Zhang, and X. Ye, “Design and simulation of frequency-selective radome together with a monopole antenna,” Applied Computational Electromagnetics Society Journal, vol. 25, no. 7, pp. 620-625, July 2010.
A. A. Omar and Z. Shen, “Thin 3-D bandpass frequency-selective structure based on folded substrate for conformal radome applications,” IEEE Transactions on Antennas and Propagation, vol. 67, no. 1, pp. 282-290, Jan. 2019.
K. K. Varikuntla and R. Singara Velu, “Design and development of angularly stable and polarisation rotating FSS radome based on substrate-integrated waveguide technology,” IET Microwaves, Antennas & Propagation, vol. 13, no. 4, pp. 478-484, 2019.
W.-J. Liao, W.-Y. Zhang, Y.-C. Hou, S.-T. Chen, C. Y. Kuo, and M. Chou, “An FSS-integrated lowRCS radome design,” IEEE Antennas and Wireless Propagation Letters, vol. 18, no. 10, pp. 2076-2080, Oct. 2019.
H. Zhou, S. Qu, B. Lin, J. Wang, H. Ma, Z. Xu, W. Peng, and P. Bai, “Filter-antenna consisting of conical FSS radome and monopole antenna,” IEEE Transactions on Antennas and Propagation, vol. 60, no. 6, pp. 3040-3045, June 2012.
W. Pan, C. Huang, P. Chen, M. Pu, X. Ma, and X. Luo, “A beam steering horn antenna using active frequency selective curface,” IEEE Transactions on Antennas and Propagation, vol. 61, no. 12, pp. 6218-6223, Dec. 2013.
G. Q. Luo, W. Hong, H. J. Tang, J. X. Chen, X. X. Yin, Z. Q. Kuai, and K. Wu, “Filtenna consisting of horn antenna and substrate integrated waveguide cavity FSS,” IEEE Transactions on Antennas and Propagation, vol. 55, no. 1, pp. 92-98, Jan. 2007.
Y. W. Chia (Michael), “Radiation from curved (conical) frequency selective surfaces,” Department of Electronic and Electrical Engineering Loughborough University of Technology, United Kingdom, 1993.
Y. E. Erdemli, K. Sertel, R. A. Gilbert, D. E. Wright, and J. L. Volakis, “Frequency-selective surfaces to enhance performance of broad-band reconfigurable arrays,” IEEE Transactions on Antennas and Propagation, vol. 50, no. 12, pp. 1716-1724, Dec. 2002.
B. Munk, Frequency Selective Surfaces: Theory and Design. John Wiley & Sons, Inc., 2000.
H.-Y. Chen and S.-H. Wen, “An empirical formula for resonant frequency shift due to Jerusalemcross FSS with substrate on one side,” Applied Computational Electromagnetics Society Journal, vol. 33, no. 7, pp. 730-740, July 2018.