Towards a Conceptual Framework for Hydraulic Drive Networks and Their Key Elements
DOI:
https://doi.org/10.13052/ijfp1439-9776.2731Keywords:
Hydraulic drive network (HDN), flow couplings, pressure couplings, multi-actuator systemAbstract
Hydraulic drive networks enable efficient actuation of multi-actuator hydraulic transmission systems which incorporate different coupling mechanisms between the actuators. So far, the topics of hydraulic drive networks have mainly been centered around the use of variable-speed electric machines combined with fixed hydraulic displacement machines to enable actuation. However, actuation in hydraulic drive networks may be realized in multiple ways, including the use of variable hydraulic displacement machines in through-drive configurations with a single electric motor, hydraulically supplied hydraulic motor-pump configurations and so forth. This paper introduces a definition of hydraulic drive networks and presents a framework of its different coupling layers including fluid short circuit connections and flow couplings through hydraulic displacement machines. Requirements for the hydraulic displacement machines as well as different component configurations and their control degrees of freedom are discussed. Furthermore, the paper illustrates the possible design space of hydraulic drive networks that should be considered when searching for an optimal drive system architecture, considering for example component sizes and system efficiency as design objectives.
Downloads
References
A. Vacca and G. Franzoni, Hydraulic fluid power : fundamentals, applications, and circuit design. Hoboken, NJ: Wiley, first edition ed., 2020.
D. Hagen, D. Padovani, and M. Choux, “A comparison study of a novel self-contained electro-hydraulic cylinder versus a conventional valve-controlled actuator—part 1: Motion control,” Actuators, vol. 8, no. 4, 2019. https://doi.org/10.3390/act8040079.
S. Michel and J. Weber, “Energy-efficient electrohydraulic compact drives for low power applications,” in Fluid Power and Motion Control FPMC 2012, Bath (GB), pp. 93–107, 2012.
S. Frischemeier, “Electrohydrostatic actuators for aircraft primary flight control - types, modelling and evaluation,” in Proceedings of the 5th Scandinavian International Conference on Fluid Power, SICFP ’97, Linköping, Sweden, May 28. -30, pp. 1–16, Technische Universität Hamburg, 5 1997. https://doi.org/10.15480/882.236.
S. Helduser, “Electric-hydrostatic drive—an innovative energy-saving power and motion control system,” Proceedings of the Institution of Mechanical Engineers, Part I, vol. 213, no. 5, pp. 427–437, 1999.
Z. Quan, L. Quan, and J. Zhang, “Review of energy efficient direct pump controlled cylinder electro-hydraulic technology,” Renewable and Sustainable Energy Reviews, vol. 35, pp. 336–346, 2014. https://doi.org/10.1016/j.rser.2014.04.036.
T. Koitto, H. Kauranne, O. Calonius, T. Minav, and M. Pietola, “Experimental study on fast and energy-efficient direct driven hydraulic actuator unit,” Energies, vol. 12, no. 8, 2019. https://doi.org/10.3390/en12081538.
C. Schenke and J. Weber, “Energy efficiency of displacement control drive systems in hydraulic forming presses,” Journal of Manufacturing Science and Engineering, vol. 141, p. 041013, 02 2019. https://doi.org/10.1115/1.4042604.
P. A. Achten and J.-O. Palmberg, “What a difference a hole makes-the commercial value of the innas hydraulic transformer,” in The Sixth Scandinavian International Conference on Fluid Power, SICFP’99, pp. 873–886, Tampere University of Technology, Finland, 1999.
M. Heikkilä and M. Linjama, “Displacement control of a mobile crane using a digital hydraulic power management system,” Mechatronics, vol. 23, no. 4, pp. 452–461, 2013. https://doi.org/10.1016/j.mechatronics.2013.03.009.
W. Shen, H. Huang, Y. Pang, and X. Su, “Review of the energy saving hydraulic system based on common pressure rail,” IEEE Access, vol. 5, pp. 655–669, 2017. https://doi.org/10.1109/ACCESS.2017.2648642.
P. Johansen and A. H. Hansen, “A digital hydraulic full-bridge oscillation transformer,” in ASME/BATH 2023 Symposium on Fluid Power and Motion Control, Fluid Power Systems Technology, p. V001T01A055, 10 2023. https://doi.org/10.1115/FPMC2023-111865.
P. Y. Li, J. Siefert, and D. Bigelow, “A hybrid hydraulic-electric architecture (hhea) for high power off-road mobile machines,” in ASME/BATH 2019 Symposium on Fluid Power and Motion Control, Fluid Power Systems Technology, p. V001T01A011, 10 2019. https://doi.org/10.1115/FPMC2019-1628.
A. A. Khandekar, J. Siefert, and P. Y. Li, “Co-design of a fully electric hybrid hydraulic-electric architecture (fe-hhea) for off-road mobile machines,” in 2021 American Control Conference (ACC), pp. 352–357, 2021. https://doi.org/10.23919/ACC50511.2021.9482615.
J. Siefert and P. Y. Li, “Optimal control of the energy-saving hybrid hydraulic-electric architecture (hhea) for off-highway mobile machines,” IEEE Transactions on Control Systems Technology, vol. 30, no. 5, pp. 2018–2029, 2022. https://doi.org/10.1109/TCST.2021.3131435.
J. Wills and P. Y. Li, “Electric and hydraulic propel torque modulation for a compact track loader with the hybrid hydraulic electric architecture (hhea),” in ASME/BATH 2023 Symposium on Fluid Power and Motion Control, Fluid Power Systems Technology, p. V001T01A067, 10 2023. https://doi.org/10.1115/FPMC2023-112035.
J. Wills and P. Y. Li, “Comparison of real-time pressure rail selection algorithms for the hybrid hydraulic electric architecture: Case study on a track loader,” in BATH/ASME 2024 Symposium on Fluid Power and Motion Control, Fluid Power Systems Technology, p. V001T01A027, 09 2024. https://doi.org/10.1115/FPMC2024-140443.
L. Schmidt and K. V. Hansen, “Electro-hydraulic variable-speed drive networks; idea, perspectives, and energy saving potentials,” Energies, vol. 15, no. 3, 2022. https://doi.org/10.3390/en15031228.
L. Schmidt and M. van Binsbergen-Galán, “Electro-hydraulic variable-speed drive network technology—first experimental validation,” Energies, vol. 17, no. 13, 2024. https://doi.org/10.3390/en17133192.
L. Schmidt, M. van Binsbergen-Galán, R. Knöll, M. Riedmann, B. Schneider, and E. Heemskerk, “Energy efficient excavator implement by electro-hydraulic/mechanical drive network,” International Journal of Fluid Power, vol. 25, p. 413–438, Dec. 2024. https://doi.org/10.13052/ijfp1439-9776.2541.
L. Schmidt, S. Ketelsen, and K. V. Hansen, “Perspectives on component downsizing in electro-hydraulic variable-speed drive networks,” in BATH/ASME 2022 Symposium on Fluid Power and Motion Control, Fluid Power Systems Technology, p. V001T01A027, 09 2022.
M. van Binsbergen-Galán and L. Schmidt, “Characterization & identification of short circuit connections in hydraulic drive networks,” International Journal of Fluid Power, 2025. (in press).
M. van Binsbergen-Galán and L. Schmidt, “Defining the design space of basic hydraulic drive networks,” International Journal of Fluid Power, vol. 26, no. 3, pp. 1–20, 2025. (in press).

