Open-loop Independent Metering Control of a Multi-DOF Forwarder Boom

Authors

  • Mikko Huova Automation Technology and Mechanical Engineering, Tampere University, Korkeakoulunkatu 6, FI-33720, Tampere, Finland
  • Jyrki Tammisto Automation Technology and Mechanical Engineering, Tampere University, Korkeakoulunkatu 6, FI-33720, Tampere, Finland
  • Matti Linjama Automation Technology and Mechanical Engineering, Tampere University, Korkeakoulunkatu 6, FI-33720, Tampere, Finland

DOI:

https://doi.org/10.13052/ijfp1439-9776.2121

Keywords:

independent metering, forwarder, energy saving

Abstract

This study applies independent metering control in a forestry forwarder in order to improve its energy efficiency. The paper describes the control method, which enables smooth control mode switches and relatively accurate velocity tracking without position, velocity or acceleration feedback. The energy saving capability is analysed through measured, realistic, working cycle, which is repeated for the baseline system and independent metering system. The input energy taken by the control valves is compared. Furthermore, the power losses of the supply pump and diesel engine are modelled to achieve semi-empirical estimate for the diesel fuel consumption. The results show an average reduction of 25% in the fuel consumption when compared to the baseline.

Downloads

Download data is not yet available.

Author Biographies

Mikko Huova, Automation Technology and Mechanical Engineering, Tampere University, Korkeakoulunkatu 6, FI-33720, Tampere, Finland

Mikko Huova received a D.Sc. degree at Tampere University of Technology, Finland, in 2015. The topic of his thesis is related to energy efficient digital hydraulic systems. He is continuing research on energy efficiency of mobile machines as a postdoctoral researcher at Tampere University. The areas of interest include control design, modelling and simulation.

Jyrki Tammisto, Automation Technology and Mechanical Engineering, Tampere University, Korkeakoulunkatu 6, FI-33720, Tampere, Finland

Jyrki Tammisto received a M.Sc. degree at Tampere University of Technology, Finland in 1998. Currently he is working as project researcher at the Automation Technology and Mechanical Engineering Unit, Tampere University.

Matti Linjama, Automation Technology and Mechanical Engineering, Tampere University, Korkeakoulunkatu 6, FI-33720, Tampere, Finland

Matti Linjama obtained a D Tech degree at Tampere University of Technology, Finland in 1998. Currently, he is an adjunct professor at the Automation Technology and Mechanical Engineering Unit, Tampere University. He started the study of digital hydraulics in 2000 and has focused on the topic since then. Currently, he is leader of the digital hydraulics research group and his professional interests include the study of hydraulic systems with high performance and energy efficiency.

References

Ding, R.; Xu, B.; Zhang, J.; Cheng, M. Bumpless mode switch of independent metering fluid power system for mobile machinery. Automation in Construction 68. 2016, Volume 68, pp. 52–64.

Elfving, M.; Palmberg, J-O.; Jansson, A. Distributed Control of Fluid Power Actuators – A Load Sensing Application of a Cylinder With Decoupled Chamber Pressure Control. Proceedings of the Fifth Scandinavian International Conference on Fluid Power. Linköping, Sweden, 1997.

Eriksson B.; Rösth, M.; Palmberg, J-O. A High Energy Efficient Mobile Fluid Power System – Novel System Layout and Measurements. Proceedings of the 6th International Fluid Power Conference. Dresden, Germany, April 1–2, 2008.

Eriksson B.; Rösth, M.; Palmberg, J-O. Energy saving system utilizing LQ-technique design. Proceedings of the Seventh International Conference on Fluid Power Transmission and Control. Hangzhou, China, 7th–10th April, 2009.

Eriksson, B. Mobile Fluid Power Systems Design with a Focus on Energy Efficiency. Doctoral dissertation, Linköping University, Linköping, Sweden, 2010.

Ge, L.; Dong, Z.; Huang, W.; Quan, L.; Yang, J.; Li, W. Research on the Performance of Hydraulic Excavator with Pump and Valve Combined Separate Meter In and Meter Out Circuits. Proceedings of the IEEE International Conference on Fluid Power Mechatronics, 2015.

Hansen, A.; Pedersen, H.; Andersen, T.; Wachmann, L. Investigation of Energy Saving Separate Meter-in Separate Meter-out Control Strategies. Proceedings of the Twelfth Scandinavian International Conference on Fluid Power. Tampere, Finland, May 18–20, 2011.

Hu, H.; Zhang, Q.; Realization of Programmable Control Using a Set of Individually Controlled Electrohydraulic Valves. Int. J. of Fluid Power. 2002, Volume 3, Issue 2. pp. 29–34.

Huova, M.; Tammisto, J.; Linjama, M.; Tervonen, J. Fuel Efficiency Analysis of Selected Hydraulic Hybrids in a Wheel Loader Application. Proceedings of the 2018 Bath/ASME Symposium on Fluid Power and Motion Control. Bath, UK, September, 12–14.

Jansson, A.; Palmberg, J-O. Separate Controls of Meter-in and Meter-out Orifices in Mobile Hyraulic Systems. SAE Technical Paper 901583. 1990, https://doi.org/10.4271/901583.

Koivumäki, J.; Mattila, J. An energy-efficient high performance motion control of a hydraulic crane applying virtual decomposition control. Proceedings of IEEE/RSJ International Conference on Intelligent Robots and Systems, 2013, pp. 4426–4433.

Mattila, J; Virvalo, T. Energy-efficient Motion Control of a Hydraulic Manipulator. Proceedings of the IEEE International Conference on Robotics & Automation. San Francisco, USA, April 2000.

Nurmi, J; Mattila, J. Global Energy-Optimal Redundancy Resolution of Hydraulic Manipulators: Experimental Results for a Forestry Manipulator. Energies 2017, 10, 647; doi:10.3390/en10050647.

Shenouda, A. Quasi-Static Hydraulic Control Systems and Energy Savings Potential Using Independent Metering Four-Valve Assembly Configuration. Ph.D. Thesis, Woodruff School of Mechanical Engineering, Georgia Institute of Technology. July 5, 2006.

Yao, B.; Liu, S. Energy-Saving Control of Hydraulic Systems With Novel Programmable Valves. Proceedings of the 4th World Congress on Intelligent Control and Automation. Shanghai, China, June 10–14, 2002.

Yuan, Q.; Lew, J. Modelling and Control of Two Stage Twin Spool Servo-Valve for Energy-Saving. Proceedings of the American Control Conference. Portland, OR, USA, June 8–10, 2005.

Downloads

Published

2020-11-04

How to Cite

Huova, M. ., Tammisto, J. ., & Linjama, M. . (2020). Open-loop Independent Metering Control of a Multi-DOF Forwarder Boom. International Journal of Fluid Power, 21(2), 147–168. https://doi.org/10.13052/ijfp1439-9776.2121

Issue

Section

Original Article

Most read articles by the same author(s)

1 2 > >>