3D Multimedia Packaging Design Based on Agile Software Development and IoT Platform

Authors

  • Patinya Sang-aroon Branch of Packaging Design, Department of Design and Packaging, Faculty of Industrial Technology, Suan Sunandha Rajabhat University, 1 U-Thong Nok Rd., Dusit, Bangkok, Thailand https://orcid.org/0000-0002-2784-3636
  • Sethakarn Prongnuch Department of Robotics Engineering, Faculty of Industrial Technology, Suan Sunandha Rajabhat University, 1 U-Thong Nok Rd., Dusit, Bangkok, Thailand https://orcid.org/0000-0002-4950-7078
  • Suchada Sitjongsataporn Department of Electronic Engineering, Mahanakorn Institute of Innovation (MII), Faculty of Engineering and Technology, Mahanakorn University of Technology, 140 Cheumsamphan Rd., Nongchok, Bangkok, Thailand https://orcid.org/0000-0002-2357-2365

DOI:

https://doi.org/10.13052/jmm1550-4646.1831

Keywords:

IoT platform, 3D packaging model development, Agile software development.

Abstract

This paper aims to present the three-dimensional (3D) packaging structure design based on the agile software development and internet of things (IoT) platform, which an efficiency validation of IoT platform is required. The objective of this research is to investigate the model development of 3D multimedia-based packaging structure using the webserver design and agile software development applied in the design and implementation process. This model development methodology comprises how the IoT platform as the client-server architecture that is used to develop and support the orthographic projection techniques, information sheet, worksheet and multimedia presentation in the modern product design. The empirical results show the creative thinking of the group of young designers that can be achieved efficiently. The proposed model development can increase significantly the fundamental knowledge and interactive design ideas of young designers combining from the two-dimension to three-dimension packaging structure model.

Downloads

Download data is not yet available.

Author Biographies

Patinya Sang-aroon, Branch of Packaging Design, Department of Design and Packaging, Faculty of Industrial Technology, Suan Sunandha Rajabhat University, 1 U-Thong Nok Rd., Dusit, Bangkok, Thailand

Patinya Sang-aroon received her B.A. degree in packaging design from the Naresuan University in Phitsanulok, Thailand in 2000, and the M.S.Tech.Ed. degrees in product design technology from the King Mongkut’s Institute of Technology Ladkrabang University in Bangkok, Thailand in 2013, respectively. She has worked as a lecturer at the department of Design and packaging, Suan Sunandha Rajabhat University in Bangkok, Thailand since 2015. Currently, she is the head of department. Her research interests include ergonomics in packaging design and ergonomics in manufacturing, the graphical work such as environmental graphics, branding and packaging, design and production develop, packaging for new type of top-quality, and industrial design system.

Sethakarn Prongnuch, Department of Robotics Engineering, Faculty of Industrial Technology, Suan Sunandha Rajabhat University, 1 U-Thong Nok Rd., Dusit, Bangkok, Thailand

Sethakarn Prongnuch received his B.Eng. degree in computer engineering from the Rajamangala University of Technology Phra Nakhon in Bangkok, Thailand in 2011, and the M.Eng. and D.Eng. degrees in computer engineering from the Mahanakorn University of Technology in Bangkok, Thailand in 2013 and 2019, respectively. He has worked as a lecturer at the department of Robotics Engineering, Suan Sunandha Rajabhat University in Bangkok, Thailand since 2013. His research interests include computer architectures and systems, embedded system, FPGA, heterogeneous system architecture, IoT and robotics.

Suchada Sitjongsataporn, Department of Electronic Engineering, Mahanakorn Institute of Innovation (MII), Faculty of Engineering and Technology, Mahanakorn University of Technology, 140 Cheumsamphan Rd., Nongchok, Bangkok, Thailand

Suchada Sitjongsataporn received her B.Eng. (first-class honors) and D.Eng. degrees in electronic engineering from the Mahanakorn University of Technology, Bangkok, Thailand in 2002 and 2009, respectively. She has worked as a lecturer at the department of Electronic Engineering, Mahanakorn University of Technology since 2002. Currently, she is an Associate Professor and the Associate Dean for Research at Faculty of Engineering and Technology in the Mahanakorn University of Technology. Her research interests are in mathematical and statistical models in the area of adaptive signal processing for communications, networking, embedded system, and image & video processing.

References

Yang, Chao-Ming; Hsu, Tzu-Fan, ‘Integrating Design Thinking into a Packaging Design Course to Improve Students’ Creative Self-Efficacy and Flow Experience. Sustainability 12, No. 15: 5929, 2020.

Yanyi Shao, Xiaojie Min, ‘VR and AR Technology used in Education in the Education of Packaging Design for Students’, Asia-Pacific Conference on Image Processing, Electronics and Computers (IPEC2021), pp. 1073–1076, Apr., 2021.

Taku Togawa, Jaewoo Park, Hiroaki Ishii, and Xiaoyan Deng, ‘A Packaging Visual-Gustatory Correspondence Effect: Using Visual Packaging Design to Influence Flavor Perception and Healthy Eating Decisions’, Volume 95, Issue 4, pp. 204–218, Dec., 2019.

Jerett Horn, Norda Alex Koohang, Joanna Paliszkiewicz, ‘The Internet of Things: Review and theoretical framework’, Expert Systems with Applications, Vol. 133, No. 1, pp. 97–108, Nov., 2019.

S. Prongnuch, T. Wiangtong, and S. Sitjongsataporn, ‘Qualitative Precipitation Estimation from Satellite Data Based on Distributed Domain-Specific Architecture’, Modelling and Simulation in Engineering (MSE), Vol. 2021, 2021.

S. Prongnuch, S. Sitjongsataporn and T. Wiangtong, ‘A Heuristic Approach for Scheduling in Heterogeneous Distributed Embedded Systems’, International Journal of Intelligent Engineering and Systems (IJIES), Vol. 13, No. 1, 2020.

Yogeshwar Shastri, Rashina Hoda, Robert Amor, ‘The role of the project manager in agile software development projects’, Journal of Systems and Software, Vol. 173, Mar., 2021.

N. Boonyathanmig, S. Gongmanee, P. Kayunyeam, P. Wutticho, and S. Prongnuch, ‘Design and Implementation of Mini-UAV for Indoor Surveillance’, The International Electrical Engineering Congress (iEECON), Pattaya, Thailand, 2021.

Benjamin LaGrone, ‘Web Design Blueprints: Build websites and applications using the latest techniques in modern web development’, Packt Publishing, 2016.

Patinya Sang-Aroon, ‘PTI2501: Lecture note for Packaging Structure Design’, Department of Design and Packaging, Suan Sunandha Rajabhat University, 2019.

Dianat, Iman; Molenbroek, Johan; Castellucci, Hector Ignacio, ‘A review of the methodology and applications of anthropometry in ergonomics and product design’, Ergonomics: an international journal of research and practice in human factors and ergonomics, Vol. 61, No. 12, pp. 1696–1720, 2018.

Yang Xi-Hui, Zhu Yuan-Peng, ‘Ergonomics in Product Design’, International Conference on Material, Mechanical and Manufacturing Engineering (IC3ME), 2015.

Oppermann R, User-interface Design. In: Adelsberger H.H., Collis B., Pawlowski J.M. (eds) Handbook on Information Technologies for Education and Training. International Handbooks on Information Systems. Springer, Berlin, Heidelberg, 2002. https://doi.org/10.1007/978-3-662-07682-8_15

Stephen M. Kosslyn; Ben Nelson, ‘Building the Intentional University: Minerva and the Future of Higher Education’. The MIT Press, 2017.

Wikipedia. Responsive web design. [Online]. Available: https://en.wikipedia.org/wiki/Responsive_web_design. Accessed on: May. 21, 2021.

Borwoo. The role of packaging structure design in custom packaging. [Online]. Available: https://www.tube-boxes.com/the-role-of-packaging-structure-design-in-custom-packaging?fbclid=IwAR1_XiqZ9V6l9GScO4Lwy57Iwzu5TRb5_TXp2XuLPd8V97aUfO6f8rlBPF0, Accessed on: May. 21, 2021.

Downloads

Published

2022-01-22

How to Cite

Sang-aroon, P. ., Prongnuch, S. ., & Sitjongsataporn, S. . (2022). 3D Multimedia Packaging Design Based on Agile Software Development and IoT Platform. Journal of Mobile Multimedia, 18(03), 475–494. https://doi.org/10.13052/jmm1550-4646.1831

Issue

2022: Vol 18 Iss 3

Section

Articles