Étude de la qualité locale de différentes versions de l’estimateur d’erreur en relation de comportement

Authors

  • Eric Florentin LMT-Cachan ENS de Cachan/CNRS/Université Paris VI 61, Av. du président Wilson 94235 Cachan Cedex France
  • Laurent Gallimard LMT-Cachan ENS de Cachan/CNRS/Université Paris VI 61, Av. du président Wilson 94235 Cachan Cedex France
  • Jean-Pierre Pelle LMT-Cachan ENS de Cachan/CNRS/Université Paris VI 61, Av. du président Wilson 94235 Cachan Cedex

Keywords:

equilibrated fields, local error, elasticity, finite element analysis

Abstract

Work presented here is a prolongation of the studies undertaken on the error estimation based on the concept of constitutive error in relation. An analysis of improvements made to the technique of construction of the statically admissible stress field is carried out by means of 2D numerical tests. The target is to highlight the influence of these improvements on the local quality of the estimator.

Downloads

Download data is not yet available.

References

[BAB 94] BABU˘S KA I., STROUBOULIS T., UPADHYAY C., GANGARAJ S., COPPS K., « Validation

of a posteriori error estimators by numerical approach », Int. J. for Num. Meth. in

Engrg., vol. 37, 1994, p. 1073–1123.

[COF 87] COFFIGNAL G., Optimisation et fiabilité des calculs éléments finis en élastoplasticité,

Thèse de Doctorat d’Etat, Université Pierre et Marie Curie, 1987.

[COO 99] COOREVITS P., DUMEAU J., PELLE J., « Control of analyses with isoparametric

elements in both 2D and 3D. », Int. J. for Num. Meth. in Engrg., vol. 46, 1999, p. 157–176.

[DIE 03] DIEZ P., PARÉS, HUERTA A., « Estimateurs d’erreur en route vers les étoiles », Actes

du sixème colloque national en calcul de structures, 2003.

[FLO 02a] FLORENTIN E., Sur l’estimation de la qualité locale des contraintes éléments finis

en élasticité tridimensionnelle., Thèse, Ecole Normale Supérieure de Cachan, 2002.

[FLO 02b] FLORENTIN E., GALLIMARD L., PELLE J., « Evaluation of the Local Quality of

Stresses in 3D Finite Element Analysis. », Comp. Meth. in Applied Mech. and Engrg.,

vol. 191, 2002, p. 4441–4457.

[GUE 82] GUEZEL O., Sur l’encadrement du taux de restitution d’énergie, Thèse, Université

Pierre et Marie Curie, 1982.

[LAD 75] LADEVÈZE P., Comparaison de modèles de milieux continus, Thèse de Doctorat

d’Etat, Université Pierre et Marie Curie, 1975.

[LAD 91] LADEVÈZE P., PELLE J., ROUGEOT P., « Error estimation and mesh optimization

for classical finite elements », Engrg. Computation, vol. 8, 1991, p. 69–80.

[LAD 97] LADEVÈZE P., ROUGEOT P., « New advances on a posteriori error on constitutive

relation in f.e. analysis », Comp. Meth. in Applied Mech. and Engrg., vol. 150, 1997,

p. 239–249.

[LAD 99] LADEVÈZE P., ROUGEOT P., BLANCHARD P., MOREAU J., « Local error estimators

for finite element analysis », Comp. Meth. in Applied Mech. and Engrg., vol. 176,

, p. 231–246.

[LAD 01] LADEVÈZE P., PELLE J., La maitrise du calcul en mécanique linéaire et non linéaire,

Hermes, 2001.

[MAR 91] MARIN P., Sur le contrôle des calculs de structures 2D et 3D élastiques incompressibles

et quasi-incompressibles, Thèse, Université Pierre et Marie Curie, 1991.

[OHM 01] OHMNIMUS S. S. E., E. W., « Local error estimates of FEMfor displacements and

stresses in linear elasticity by solving local Neumann problems », Int. J. for Num. Meth. in

Engrg., vol. 52, 2001, p. 727–746.

[PER 98] PERAIRE J., PATERA A., « Bounds for linear-functional outputs of coercive partial

differential equations : local indicators and adaptive refinement », LADEVÈZE P., ODEN

J., Eds., Advances in Adaptive Computational Methods, p. 199–216, Elsevier, 1998.

[PRA 47] PRAGERW., SYNGE J., « Approximation in elasticity based on the concept of functions

space », Quart. Appl. Math., vol. 5, 1947, p. 261–269.

[PRU 99] PRUDHOMME S., ODEN J., « On goal-oriented error estimation for elliptic problems

: application to the control of pointwise errors. », Comp. Meth. in Applied Mech. and

Engrg., vol. 176, 1999, p. 313–331.

[RAN 97] RANNACHER R., SUTTMEIER F., « A Feedback approach to error control in finite

element methods : Application to linear elasticity », Comp. Mech., vol. 19, 1997, p. 434-

[ROU 89] ROUGEOT P., Sur le contrôle de qualité des maillages éléments finis, Thèse, Université

Pierre et Marie Curie, 1989.

[STR 00] STROUBOULIS T., BABU˘SKA I., DATTA D., COPPS K., GANGARAJ S., « A posteriori

estimation and adaptative control of the error in the quantity of interest. Part 1 : A

posteriori estimation of the error in the Von Mises stress and the stress intensity factor »,

Comp. Meth. in Applied Mech. and Engrg., vol. 180, 2000, p. 261–274.

[ZIE 92] ZIENKIEWICZ O., ZHU J., « The superconvergent patch recovery and a posteriori

error estimates, Part 1 : The recovery technique », Int. J. for Num. Meth. in Engrg., vol. 33,

, p. 1331–1364.

Downloads

Published

2003-07-26

How to Cite

Florentin, E. ., Gallimard, L. ., & Pelle, J.-P. . (2003). Étude de la qualité locale de différentes versions de l’estimateur d’erreur en relation de comportement. European Journal of Computational Mechanics, 12(6), 761–783. Retrieved from https://journals.riverpublishers.com/index.php/EJCM/article/view/2413

Issue

Section

Original Article