Dimensioning Downstream-Throttled Pneumatic Cylinders with Time-Controlled Quick-Exhaust Valves

Authors

  • Luca Marvin Päßler Institute for Fluid Power Drives and Systems (ifas), RWTH Aachen University, Campus-Boulevard 30, D-52074 Aachen, Germany https://orcid.org/0009-0008-3102-9814
  • Olivier Reinertz Institute for Fluid Power Drives and Systems (ifas), RWTH Aachen University, Campus-Boulevard 30, D-52074 Aachen, Germany https://orcid.org/0000-0003-2819-9990
  • Katharina Schmitz Institute for Fluid Power Drives and Systems (ifas), RWTH Aachen University, Campus-Boulevard 30, D-52074 Aachen, Germany https://orcid.org/0000-0002-1454-8267

DOI:

https://doi.org/10.13052/ijfp1439-9776.2736

Keywords:

Pneumatics, Pneumatic cylinder, energy saving circuit, sizing method, end cushion, energy efficiency

Abstract

Time-controlled pneumatic-mechanical quick-exhaust valves have been demonstrated to significantly improve the energy efficiency of downstream-throttled pneumatic cylinders for motion tasks [1]. This enhancement is achieved by decreasing the cylinder movement time, allowing for smaller cylinder sizing and thereby exploiting the strong relationship between air consumption and movement time. Previous experimental results of selected drives and load configurations indicate that downsizing by a minimum of one standard cylinder size is feasible with this approach. This reduction in size is essential to increase efficiency.

Therefore, this paper introduces a novel dimensioning method for pneumatic cylinders equipped with a time-controlled quick-exhaust valve. The proposed method is based on an algebraic sizing formula derived from a mathematical model describing the cylinder velocity. The experimental validation of this model demonstrates its capacity to accurately predict transfer times and to provide deeper understanding of the technology’s potential.

Downloads

Download data is not yet available.

Author Biographies

Luca Marvin Päßler, Institute for Fluid Power Drives and Systems (ifas), RWTH Aachen University, Campus-Boulevard 30, D-52074 Aachen, Germany

Luca Päßler received a bachelor’s degree in mechanical engineering in 2022 and a Master’s degree in process engineering from RWTH Aachen University in 2024. Since 2024, he has been working as a research associate at the Institute for Fluid Power Drives and Systems (ifas), RWTH Aachen University. His research areas include simulation and optimization of pneumatic systems and components, focusing on enhancing energy efficiency and performance.

Olivier Reinertz, Institute for Fluid Power Drives and Systems (ifas), RWTH Aachen University, Campus-Boulevard 30, D-52074 Aachen, Germany

Olivier Reinertz received his diploma and his doctoral degree in mechanical engineering from RWTH Aachen University, Germany. He is currently Scientific Director at the Institute for Fluid Power Drives and Systems (ifas) at RWTH Aachen University and since 2025 adjunct professor at RWTH Aachen University. His research focuses on the model-based analysis of fluid power components and systems and the derivation and validation of innovative strategies for efficiency and performance optimization with an emphasis on compressed air and gas-powered systems.

Katharina Schmitz, Institute for Fluid Power Drives and Systems (ifas), RWTH Aachen University, Campus-Boulevard 30, D-52074 Aachen, Germany

Katharina Schmitz studied mechanical engineering at RWTH Aachen University and Carnegie Mellon University in Pittsburgh (USA) and graduated as Dr.-Ing. at RWTH Aachen University in 2015. Since 2018, she is a full professor at RWTH Aachen University and director of the Institute for Fluid Power Drives and Systems (ifas). In addition, she is Vice Dean of the Faculty for Mechanical Engineering at RWTH Aachen, a position she has held since 2020. Prof. Schmitz’s awards and honours include several best paper awards and 2023 IMechE Joseph Bramah Medal award.

References

L. Päßler, C. Reese, O. Reinertz, and K. Schmitz, “Implementation and Experimental Validation of a Time-Controlled Quick-Exhaust for Downstream Throttled Pneumatic Drives,” Fluid Power 2025, Maribor, Slovenia, 2025.

V. Boyko, F. Nazarov, W. Gauchel, R. Neumann, M. Doll, and J. Weber, “Comprehensive Application-Based Analysis of Energy-Saving Measures in Pneumatics,” International Journal of Fluid Power, vol. 25, no. 1, pp. 27–58, 2024.

V. Boyko, S. Hülsmann, and J. Weber, “Comparative Analysis of Actuator Dimensioning Methods in Pneumatics,” in ASME/BATH 2021 Symposium on Fluid Power and Motion Control, Bath, United Kingdom, 2021.

O. Reinertz and K. Schmitz, “Optimized Pneumatic Drives Through Combined Downstream and Adaptive Upstream Throttling,” in BATH/ASME 2020 Symposium on Fluid Power and Motion Control, Bath, United Kingdom, 2020.

C. Reese, O. Reinertz, and K. Schmitz, “Dimensioning method of pneumatic cylinders based on the pneumatic end-cushion,” International Journal of Fluid Power, vol. 26, no. 3, pp. 381–410, 2025.

M. Doll, R. Neumann, and O. Sawodny, “Dimensioning of pneumatic cylinders for motion tasks,” International Journal of Fluid Power, vol. 16, no. 1, pp. 11–24, 2015.

D. Gryboś and J. S. Leszczyński, “A Review of Energy Overconsumption Reduction Methods in the Utilization Stage in Compressed Air Systems,” Energies, vol. 17, no. 6, p. 1495, 2024.

D. Scholz, Auslegung servopneumatischer Antriebssysteme. Aachen, Germany: Dissertation RWTH University, 1990.

K. Schmitz and O. Reinertz, “Pneumatikantrieb, Entlüftungsventil dafür und Verfahren zum Entlüften,” Aachen, Germany Patent DE102023104570B3, Feb. 24, 2023.

M. Doll, R. Neumann, and O. Sawodny, “Energy efficient use of compressed air in pneumatic drive systems for motion tasks,” in Proceedings of 2011 International Conference on Fluid Power and Mechatronics, FPM 2011, Beijing, China, 2011.

O. Reinertz, C. Reese, and K. Schmitz, “Downstream Throttled Pneumatic Drives with Time-Controlled Pneumatic-Mechanical Quick-Exhaust Valve,” in Proceedings of the 2024 Global Fluid Power Society PhD Symposium (GFPS), Hudiksvall, Sweden, 2024.

A. Nishimura, H. Yamada, and K. Fukushima, “Durchflussregler und Atnriebsvorrichtung damit,” Patent EP 3 891 402 B1, Oct. 13, 2021.

A. Nishimura and A. Tadano, “Time delay valve and flow rate controller,” Patent EP 4 163 503 B1, Apr. 12, 2023.

SMC Corporation, Operation Manual Deceleration Controller DAS. Available: https://www.smcworld.com/upfiles/manual/en-jp/files/DOC1018150.pdf, [Accessed: Feb. 5, 2026].

S. Merkelbach and H. Murrenhoff, “Exergy Based Analysis of Pneumatic Air Saving Measures,” in Proceedings of the ASME/BATH 2015 Symposium on Fluid Power and Motion Control (FPMC2015), Chicago, USA, 2015.

M. Y. Mohd Yusop, Energy Saving for Pneumatic Actuation using Dynamic Model Prediction. Wales, United Kingdom: School of Engineering, Cardiff University, 2006.

P. Harris, G. E. O’Donnell, and T. Whelan, “Energy Efficiency in Pneumatic Production Systems: State of the Art and Future,” in Leveraging Technology for a Sustainable World, Berlin, Heidelberg, Germany, 2012.

A. Raisch, S. Hüllsmann, and O. Sawodny, “Saving Energy by Predictive Supply Air Shutoff for Pneumatic Drives,” in 2018 European Control Conference (ECC), Limassol, Cyprus, 2018.

P. Harris, S. Nolan, and G. E. O’Donnell, “Energy optimisation of pneumatic actuator systems in manufacturing,” Journal of Cleaner Production, vol. 72, pp. 35–45, 2014.

Y. Shi, X. Li, and Y. Teng, “Research on Pneumatic Cylinder’s Exhausted-Air Reclaiming Control Devices,” in Proceedings of the JFPS International Symposium on Fluid Power, Tsukuba, Japan, 2005.

C. Reese, O. Reinertz, and K. Schmitz, “Feasibility Study and Experimental Validation of a Novel Combined Throttling Approach,” in 14th International Fluid Power Conference (14. IFK), Dresden, Germany, 2024.

M. Guelker, “White Paper – Innovative air cushion solution improves productivity and machine reliability and saves money,” Festo Corporation, 2011.

P. O’Neill, “All About Cylinder Cushioning,” Power and Motion, 2006.

F. Tröster and H. Geupel, Steuerungs- und Regelungstechnik für Ingenieure. München, Germany: Oldenbourg Wissenschaftsverlag, 2005.

Downloads

Published

2026-11-16

How to Cite

Päßler, L. M., Reinertz, O. ., & Schmitz, K. . (2026). Dimensioning Downstream-Throttled Pneumatic Cylinders with Time-Controlled Quick-Exhaust Valves. International Journal of Fluid Power, 27(03), 617–648. https://doi.org/10.13052/ijfp1439-9776.2736

Issue

Section

Original Article

Most read articles by the same author(s)