Study on Dynamic Characteristics of Negative Flow Control Variable Axial Piston Pump for Hydraulic Excavator
DOI:
https://doi.org/10.13052/ijfp1439-9776.2235Keywords:
Hydraulic Excavator；Negative flow control; Variable Axial Piston Pump; Dynamical characteristicsAbstract
Hydraulic excavator is important mechanical equipment in engineering construction, which is widely used in mining enterprises, construction industry, etc. Variable axial piston pump is the main power component of hydraulic excavator. The negative flow control variable axial piston pump is deduced and the mathematical model is established. The dynamic simulation model of negative flow control variable axial piston pump is built by using SIMULINK in MATLAB software, and the simulation analysis is carried out. The influence of the main parameters of negative flow control mechanism on the dynamic characteristics of negative flow control variable axial piston pump is obtained, which provides a reference for the parameter design of negative flow control mechanism.
Downloads
References
Cho S H, Noskievic P. Position tracking control with load-sensing for energy-saving valve-controlled cylinder system[J]. Journal of Mechanical Science and Technology, 2012, 26(2)
Li Z H, Song J C, Huang Y J, et al. Design and analysis for a new energy-saving hydraulic pumping unit[J]. P I MECH ENG C-J MEC, 2018, 232(12)
Jin-yan SHI，Shi-xi SHI，Hui LI. Static characteristic analysis of total power control for axial piston variable pump of hydraulic excavator[J]. Machine tool and hydraulic , 2019 (18)
Wang W P, Bo W. An Energy-Saving Control Strategy with Load Sensing for Electro-Hydraulic Servo Systems[J]. Journal of Mechanical Engineering, 2016, 62(12)
Alessandro Roccatello, Salvatore Manco. Modelling a ariable Displacement Axial Piston Pump in a Multibody Simulation Enviroment[J]. Journal of Dynamic System, Measurement and Control, 2007(13)
Marring N. D，Johnson R. E. Modeling and designing a variable displacement open loop pump[J].Journal of Dynamic Systems Measurement and Control, 2006(12)
Xiao Q, Wang Q F, Zhang Y T. Control strategies of power system in hybrid hydraulic excavator[J]. Automation in Construction, 2008,17(4)
Zhao Qing, Hu Jun Ke, Wang Yan. Design of a new type of concrete delivery pump hydraulic system [J].Machine tool and hydraulic, 2016(22)
Jinyan Shi , Xiaoying Dong, Kechang Zhang. Analysis of Variable Control Mode of K3V63 variable displacement pump[D].ICITEE2020,2020(12)
Liu Xin, Deng Sanpeng. Application of electro-hydraulic proportional technology in large hydraulic jack up system [J]. Science and technology economic guide, 2016 (16)
Guo Rensheng. Optimization analysis and calculation based on MATLAB[J]. Mechanical design and manufacturing, 2004 (2)
Liu Yulong. Dynamic performance analysis of Load sensitive variable pump[J]. Machine tool and hydraulic ,2017 (22)
Shi Jin Yan, Zhou Hui, Shi Shi Xi. The influence of the parameters of the servo valve on the dynamic characteristics of the variable pump of the negative flow control mechanism [J]. Machine tool and hydraulic , 2015 (1)
Bennett N, Walawalkar A, Heck M. Integration of digging forces in a multi-body-system model of an excavator[J]. Proceedings of the Institution of Mechanical Engineers, Part K: Journal of Multi-body Dynamics, 2016, 230(2)
Frimpong S, Hu Y and Inyang H. Dynamic modeling of hydraulic shovel excavators for geomaterials[J]. International Journal of Geomechanics, 2009(8)
Towarek Z. Dynamics of a single -bucket excavator on a deformable soil foundation during the digging of ground[J]. International Journal of Mechanical Sciences, 2003, 45(6)
Šalinić S, Bošković G and Nikolić M. Dynamic modelling of hydraulic excavator motion using Kane’s equations[J]. Automation in Construction, 2014(44)
Kim Y B, Ha J, Kang H. Dynamically optimal trajectories for earthmoving excavators[J]. Automation in Construction, 2013(35)
Zweiri Y H, Seneviratne L D and Althoefer K. Modelling and control of an unmanned excavator vehicle[J]. Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems & Control Engineering, 2003, 217(4)
Nam Y J, Park M K. Virtual excavator simulator featuring HILS and haptic joysticks[J]. Journal of Mechanical Science and Technology, 2015, 29(1)
Hu Q Y, Zhang H, Tian S J, et al. Model Reduction of a Load-Sensing Hydraulic System via Activity Index Analysis[J]. STROJ VESTN-J MECH E, 2017, 63(1)
Yousefi Moghaddam R, Kotchon A and Lipsett M G. Method and apparatus for on-line estimation of soil parameters during excavation[J]. Journal of Terramechanics, 2012(49)
Kim J W, Jung S, Kim J, et al. Optimal design of the front linkage of a hydraulic excavator for multi-objective function[J]. Journal of Mechanical Science & Technology, 2014, 28(8)
