Application de la méthode asymptotique numérique au contact des dents d’engrenage
Keywords:
asymptotic numerical method, contact, gear, displacements, finite elementAbstract
This work consists in jointly applying the asymptotic numerical method to the finite element method, and the classical contact law to formulate gearing. In order to determine the component of displacement only due to contact, the study highlights the limits of the effects of the contact in the thickness of the tooth. The various parameters related to the numerical asymptotic method and the law of contact are varied in different simulations and the results are compared with those of the literature. These parameters are chosen to be in good adequacy with the analytical approaches.
Downloads
References
Abichou H, Simulation de l’emboutissage à froid par la méthode asymptotique numérique,
Thèse de Doctorat, Université de Metz, 2001.
Anand R., Mijar and Jasbir S., “Study of Variational Inequality and Equality Formulations for
Elastostatic Frictional Contact Problems”, Archives of Computational Methods in
Engineering, vol. 7, 4, 2000, p. 487- 449.
Barber J. R., Elasticity, Kluwer Academic Publishers, Dordrecht/boston/London, 1993.
Cochelin B., Méthodes Asymptotiques Numériques pour le calcul non linéaire, Habilitation à
Diriger les recherches, Université de Metz, 1994.
Cornell R. W., “Compliance and stress sensitivity of spur gear teeth”, Trans. ASME, J. Mech.
Des., vol. 103, 1981, p. 447-459.
Coy J. J., Hu-Chih Chao C., “A Method of Selecting Grid Size to Account for Hertz
Deformation in Finite Element Analysis of Sour Gears”, Journal of Mechanical Design,
vol. 104, 1982, p. 759-766.
Elhage Hussein A., Damil N., Potier Ferry M., “An asymptotic numerical algoritm for
frictionless contact problem”, Revue européenne des éléments finis, vol. 7, 1998, p. 119-
Gagnon P., Gosselin C., Cardou A., Cloutier L., “Assessment of FEA Calculation of Spur
Gears tooth Deflection Using Electronic Pattern Interferometry”, JSME International
Conference on Motion and Power transmissions, Hiroshima, Japan, Nov. 22-26, 1991.
Hertz H., “Miscellaneous Paper, Part V”, The Contact of Elastic Solid, The MacMillan,
London, 1896, p. 146-162.
Johnson K. L., Contact mechanics, Cambridge University Press, Cambridge, 1999.
Kikuchi N., Oden J. T., Contact Problems in Elasticity: A Study of Variational Inequalities
and Finite Element Methods, Siam. Philadelphia, 1988.
Refaat M. H., Meguid S. A., “On the Contact Analysis of Spur Gears Using Variational
Inequalities”, Computers and Structures, vol. 57, 1995, p. 871-882.
Walker H., “Gear tooth deflection and profile modification, Part I”, The Engineer, vol. 166,
-1, p. 409-412.
Walker H., “Gear tooth deflection and profile modification, Part II”, The Engineer, vol. 166,
-2, p. 434-436.
Walker H., “Gear tooth deflection and profile modification, Part III”, The Engineer, vol. 170,
, p. 102-104.
Wang K.L., Cheng H. S., “A Numerical Solution to the Dynamic Load, Film Thickness and
Surface Temperatures in Spur Gear”, Journal of Mechanical Design, vol. 103, 1981,
p. 177-194.
Weber C., The Deformation of Loaded Gears and The Effect on their Load-Carrying
Capacity, British Dep of Scientific and Industrial Research, Report n° 3, 1949.
